Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 01 Nov 1996 21:38:21 +0900
From:      "Jun, Gyu-Chang" <geoid@ktnet.co.kr>
To:        questions@freebsd.org
Subject:   2.1.5R on Dell OptiPlex Pro
Message-ID:  <2.2.32.19961101123821.017b2ed8@ktnet.co.kr>

next in thread | raw e-mail | index | archive | help

 Dear subscriber.

 Today, I tried to install FreeBSD-2.1.5RELEASE on Dell Optiplex Pro.

    Dell Optiplex Pro : PentiumPro 200MHz
                        440FX Pentium Pro Chipset
                        64M ECC RAM
                        Adaptec 2940UW with Seagate ST15150N 4G (SCSI ID : 0)
                                            NEC CDROM (SCSI ID : 5)
                        On board 3C59X NIC (PCI Bus Mastering)
                        S3 Trio V+ 2M VRAM
                        Vibra 16 sound card (on board)

 Install Process was smoothly done except for some odd messages.

 >BIOS basemem (638K) != RTC basemem(640K)

 What does this mean? Virus? :)

 >ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 15 on pci0:17
 >ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
 >ahc0 waiting for scsi devices to settle
 >(ahc0:0:0): "SEAGATE ST15150N 0020" type 0 fixed SCSI 2
 >sd0(ahc0:0:0): Direct-Access 4095MB (8388315 512 byte sectors)
 >ahc0:A:5: refuses WIDE negotiation.  Using 8bit transfers
 >ahc0: board is not responding
 >(ahc0:5:0): timed out in dataout phase, SCSISIGI == 0x0
 >ahc0: Issued Channel A Bus Reset #2. 1 SCBs aborted
 >(ahc0:5:0): "NEC CD-ROM DRIVE:462 1.14" type 5 removable SCSI 2
 I looked up the mailing list archives and found that AHA-2940UW 
 is said to be supported.. but why my 2940UW refuses WIDE nego.?
 I think it will surely degrade the performance for ST15150N..

>vx0 <3Com 3c590 EtherLink III PCI> rev 0 int a irq 14 on pci1:8
>utp[*UTP*] address %D
>Warning! Defective early revision adapter!
 I know that this warning message is meaningless.
 But.. what about the ethernet address? ifconfig after booting shows
 exact ethernet address for this 3c59X interface...

>sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
>sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field
replaceable unit: 1
>, retries:2
 Even more messages.. I can not understand the meaning..

  The most serious problem is that of AHA-2940UW.
  Why it is used with 8 bit transfer? Is ther any remedy?

  Any advice will be appreciated.

  Thanks in advance..
------------------------------------------------------------------------
Korea Trade Network.                             http://www.ktnet.co.kr/
Communication Business Team.                          fax : 82-2-5512268
Tech. Staff                                                 82-2-5518682
------------------------------------------------------------------------




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19961101123821.017b2ed8>