Date: Mon, 12 May 2008 15:38:47 +0900 From: dikshie <dikshie@gmail.com> To: "Jeremy Chadwick" <koitsu@freebsd.org> Cc: "Andrey V. Elsukov" <bu7cher@yandex.ru>, freebsd-stable@freebsd.org Subject: Re: any available patches for sata: "ad4: warning - setfeatures set transfer mode taskqueue timeout - completing request directly" Message-ID: <910e60e80805112338m6edf555fr3b7693f2c81bac5f@mail.gmail.com> In-Reply-To: <20080512060017.GB1333@eos.sc1.parodius.com> References: <910e60e80805112117j1ecb83b4s4cdb62eafbdf748f@mail.gmail.com> <4827D60A.6040200@yandex.ru> <910e60e80805112236r105b5894r285b68f0d28105b1@mail.gmail.com> <910e60e80805112242w57a6e932tbf48e482d96dc452@mail.gmail.com> <20080512060017.GB1333@eos.sc1.parodius.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 12, 2008 at 3:00 PM, Jeremy Chadwick <koitsu@freebsd.org> wrote: > 1) Have you checked SMART statistics of the drive, or run SMART tests? > Install ports/sysutils/smartmontools and use smartctl -a /dev/ad4, and > provide the output. > > 2) Is the error always on ad4? If so, is the error always at LBA > 4139103, or "around there" (give or take a few thousand addressing > blocks)? If so, the ad4 disk may be going bad. Otherwise, I would say > this is probably the issue I've documented on my Common Issues page. dhcp-143-221# smartctl -a /dev/ad4 smartctl version 5.38 [amd64-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Second Generation Serial ATA family Device Model: WDC WD3200AAKS-00VYA0 Serial Number: WD-WCARW2314765 Firmware Version: 12.01B02 User Capacity: 320,072,933,376 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 12 15:27:24 2008 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (8760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 155 155 021 Pre-fail Always - 5233 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 940 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 11 194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. errors always on ad4 with random LBA blocks numbers. with best regards, -dikshie-
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?910e60e80805112338m6edf555fr3b7693f2c81bac5f>