Date: Wed, 12 Jan 2000 10:34:47 -0600 (CST) From: John Sconiers <jrs@enteract.com> To: Warner Losh <imp@village.org> Cc: "Jonathan M. Bresler" <jmb@hub.freebsd.org>, freebsd-mobile@FreeBSD.ORG Subject: Re: Linksys fast ethernet card working?? more info Message-ID: <Pine.NEB.3.96.1000112101254.8979A-500000@shell-1.enteract.com> In-Reply-To: <200001112223.PAA07101@harmony.village.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
> : no card in database is what I'm getting. Am I installiong this correctly.
> : should I have added the stuff in rc.conf??
> This looks good. Can you send me your pccard.conf file off the list?
> Also, by default /etc/pccard.conf.generic is used, so maybe that's the
> problem?
I know this is going to sound really crazy. However......This morning I
was formatting a floppy to move the files off to another machine to email
Warner. I figure I would also send the results of "pccardc dumpcis".
Instead of typing "pccardc" I typed "pccardd". Then I recieved the
following messege:
devclass_aloc_unit:ed0 already exists, using next available unit number
ed1 at port 0x340-0x35f irq 10 slot 1 on pccard1
ed1: address 00:e0:98:74:03:e9,type Linksys (16 bit)
I linked /etc/pcard.conf to /etc/pccard.conf/generic per the
above messege rebooted. Again got the no card in database messege. Then
tpyed "pccardd"....It sees the card. Ideas?? I've atteched the dmesg and
pccard.conf files as well as the pccard dumpcis output.
JOHN
[-- Attachment #2 --]
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d4 0a ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 100nS, Memory block size = 8Kb, 2 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 41 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 49 01 ab c1
PCMCIA ID = 0x149, OEM ID = 0xc1ab
Tuple #4, code = 0x15 (Version 1 info), length = 50
000: 04 01 4c 69 6e 6b 73 79 73 00 45 74 68 65 72 46
010: 61 73 74 20 31 30 2f 31 30 30 20 50 43 20 43 61
020: 72 64 20 28 50 43 4d 50 43 31 30 30 29 00 00 ff
030: 00 ff
Version = 4.1, Manuf = [Linksys],card vers = [EtherFast 10/100 PC Card (PCMPC100)]
Addit. info = []
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 20 00 04 01
Reg len = 2, config register addr = 0x400, last config = 0x20
Registers: X-------
Tuple #6, code = 0x1b (Configuration entry), length = 7
000: d0 81 18 45 30 fc be
Config index = 0x10(default)
Interface byte = 0x81 (I/O) wait signal supported
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level = 5
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 01 08 ca 60 00 03 1f
Config index = 0x1
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 02 08 ca 60 20 03 1f
Config index = 0x2
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 03 08 ca 60 40 03 1f
Config index = 0x3
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 04 08 ca 60 80 03 1f
Config index = 0x4
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x380 block length = 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 05 08 ca 60 00 02 1f
Config index = 0x5
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x200 block length = 0x20
Tuple #12, code = 0x1b (Configuration entry), length = 7
000: 06 08 ca 60 20 02 1f
Config index = 0x6
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x220 block length = 0x20
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 40 02 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x240 block length = 0x20
Tuple #14, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #15, code = 0x14 (No link), length = 0
Tuple #16, code = 0xff (Terminator), length = 0
2 slots found
[-- Attachment #3 --]
# This file now contains just the overrides from /etc/defaults/rc.conf
# please make all changes to this file.
# -- sysinstall generated deltas -- #
moused_port="/dev/psm0"
moused_enable="YES"
pccard_enable="YES"
pccardd_flags="-i 10 -i 11"
pccard_mem="DEFAULT"
apm_enable="YES"
pccard_beep="2"
[-- Attachment #4 --]
io 0x240-0x360
irq 8 9 10
memory 0xd4000 96k
card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)"
config 0x3 "ed0" 10
insert echo Card inserted
insert /etc/pccard_ether ed0
remove echo Card removed
remove /sbin/ifconfig ed0 delete
[-- Attachment #5 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000110-CURRENT #0: Tue Jan 11 14:27:06 CST 2000
root@:/usr/src/sys/compile/DUECE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Celeron (363.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 66912256 (65344K bytes)
avail memory = 60981248 (59552K bytes)
Preloaded elf kernel "kernel" at 0xc03b4000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NeoMagic MagicMedia 256AV SVGA controller> mem 0x70400000-0x704fffff,0x70000000-0x703fffff,0xe0000000-0xe0ffffff irq 11 at device 0.0 on pci1
pcic-pci0: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.0 on pci0
pcic-pci1: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50101000-0x50101fff irq 11 at device 2.1 on pci0
pci0: unknown card (vendor=0x1013, dev=0x6001) at 6.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 0 at device 7.2 on pci0
uhci0: Invalid irq 0
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device 7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata-isa0: already registered as ata0
ata-isa1: already registered as ata1
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic: polling, can't alloc 0
pcic: polling, can't alloc 0
pcic0: <Intel i82365> on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x3bc-0x3c3 irq 7 flags 0x40 on isa0
isa_compat: didn't get ports for ppc
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
sb0 at port 0x220 irq 5 drq 1 on isa0
snd0: <SoundBlaster Pro 3.2>
opl0 at port 0x388 on isa0
snd0: <Yamaha OPL3 FM>
WARNING: "snd" is usurping "snd"'s cdevsw[]
ad0: <IBM-DBCA-206480/BC4IA88F> ATA-4 disk at ata0 as master
ad0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
acd0: <TOSHIBA CD-ROM XM-1902B/1717> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 1
devclass_alloc_unit: ed0 already exists, using next available unit number
ed1 at port 0x340-0x35f irq 10 slot 1 on pccard1
ed1: address 00:e0:98:74:03:e9, type Linksys (16 bit)
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.96.1000112101254.8979A-500000>