Date: Wed, 13 Feb 2008 15:08:56 -0600 From: Brandon Weisz <lists@avioc.org> To: Brian Biskeborn <bbiskebo@bosco.princeton.edu> Cc: freebsd-current@freebsd.org Subject: Re: hptrr driver panics on 7.0-RC2 Message-ID: <1202936936.6645.23.camel@section-8.internal.avioc.org> In-Reply-To: <47B315C8.3060805@bosco.princeton.edu> References: <47B315C8.3060805@bosco.princeton.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2008-02-13 at 11:07 -0500, Brian Biskeborn wrote: > Hello all, > > I've reported this problem to HighPoint, but I'm curious to see whether > anyone else has run into it. I'm using a RocketRaid 2314MS card on an > amd64 system. When I boot the install CD for 7.0-RC2, the driver panics: > > hptrr: (null): 180*32=5760 bytes > hptrr: (null): 180*288=51840 bytes > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0x3 > fault code = supervisor read data, page not present > instruction pointer = 0x8:0xffffffff80502032 > stack pointer = 0x10:0xffffffff80fd0950 > frame pointer = 0x10:0xffffffff80822ecf > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 0 (swapper) > trap number = 12 > panic: page fault > cpuid = 0 > > This is with no drives connected to the controller. My machine specs: > Dell Inspiron 531S > Processor: Athlon 64 X2 4000+ > Motherboard: Asus M2N61-AX (seems to be made specifically for Dell) with > the MCP61 chipset > > So: has anyone else seen a panic with this or other HighPoint cards? I > know HighPoint provides a binary blob for their driver, but could the > problem be in the wrapper code someplace? > > I wish I could provide more information, but not being able to install > FreeBSD limits my options there. I had to take a picture of the screen > and type in the panic output by hand :) > > Cheers, > Brian I can confirm this with a rr1740 after the hptrr 1.2 update. Unfortunately I had to pull the card out and setup gmirror to get the machine back up and running and didn't have time to do any debugging. I have the card here on my desk. I can try to find some hardware to do some testing if it would be beneficial to anyone? Brandon > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1202936936.6645.23.camel>