Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 02 Apr 2010 13:23:38 +0200
From:      Michael Fuckner <michael@fuckner.net>
To:        John <comp.john@googlemail.com>
Cc:        Tanel Rebane <tanel.rebane@itassistans.se>, "'freebsd-hardware@freebsd.org'" <freebsd-hardware@freebsd.org>
Subject:   Re: Status on LSI SAS2008?
Message-ID:  <4BB5D3BA.2050303@fuckner.net>
In-Reply-To: <20100402104901.GA3492@potato>
References:  <ece23666.1caa400.359dc349.1e38@itassistans.se>	<4B683F37.4040807@fuckner.net> <20100402104901.GA3492@potato>

next in thread | previous in thread | raw e-mail | index | archive | help
On 04/02/10 12:49, John wrote:
> On Tue, Feb 02, 2010 at 04:05:27PM +0100, Michael Fuckner wrote:
>> On 02/02/10 13:11, Tanel Rebane wrote:
>>
>>   >  Does anyone know the status of the LSI SAS2008 chipset in regards to
>>   >  FreeBSD? If any, I suppose it?s the mfi(4)-driver that should pick up
>>   >  support. I know the LSI SAS2108 should work fine with mfi(4) but I
>>   >  have no idea how big the differences between 2008 and 2108 are.
>>
>> Hi all,
>>
>> I've been running those cards on Linux.
>>
>> The 2008-Chip is an HBA-Chip. Linux uses the mpt2sas Driver (the old
>> HBAs are using mptsas).
>>
>>
>> The 2108 is the Raid-Chip using the megaraid_sas or 3w-sas driver
>> (depending on the firmware installed- LSI 9261-8i and 3ware 9750-8i seem
>> to have identical Hardware.
>
> Hi,
Hi all,

> Can you please clarify which linux works and how large the individual
> disks are?
I know that 6GBIT SAS HBAs with LSI 2008 Chip are in the default kernel 
since 2.6.33- patches are available. The Disksize shouldn't matter.


> My problem under BSD is 2-fold:
>
> 1. There is an open PR for this LSI device at
> http://www.freebsd.org/cgi/query-pr.cgi?pr=144326
you should reclassify the pr- telling about the exact device (device/ 
vendor id).


> 2. My smallest disk is 2TB
is this a problem? When you have a driver, it is recognized.

Your largest disk is probably also 2TB ;)


> Without visiting the datacentre, I have no device to install to.
even when visiting the DC, I suppose.

I know of some 3GBit HBAs beeing able to be upgraded to Raidcontrollers 
(linux driver changes from mptsas to megaraid_sas). But this is not 
possible with all LSI devices.

Afaik we don't have a driver for freebsd yet.

Regards,
  Michael!



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BB5D3BA.2050303>