Date: Sat, 18 Jun 2005 10:52:00 +0200 From: Daniel Gerzo <danger@rulez.sk> To: Mitch Parks <mitch@kuoi.asui.uidaho.edu>, freebsd-stable@freebsd.org Subject: Re: 5.4-p1 crash Message-ID: <1831991265.20050618105200@rulez.sk> In-Reply-To: <20050617150950.F1236@kuoi.asui.uidaho.edu> References: <20050617150950.F1236@kuoi.asui.uidaho.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Mitch,
Saturday, June 18, 2005, 12:23:19 AM, you typed the following:
> Below are details regarding another crash on a Dell 2600 SMP (HTT and USB
> disabled). It has been 9 days since the last crash. I didn't have the serial
> console in place for this last crash, but it is now.
> Text includes:
> 1. backtrace
> 2. dmesg
> 3. kernel conf
> Since Dell diagnostics and Memtest check out fine, I'm kind of between a
> rock and a hard place here. I have a similar 2600 running 4.9 that is
> working great. I'd welcome any advice.
I think I'm experiencing this as well on my Dell gx280, however I
don't have any backtrace.
my dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-DanGerSEC #2: Fri May 27 23:16:31 CEST 2005
danger@daemon.rulez.sk:/usr/obj/usr/src/sys/daemon
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1071144960 (1021 MB)
avail memory = 1042702336 (994 MB)
MPTable: <DELL Opti GX280 >
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: unable to route slot 1 INTA
pcib0: unable to route slot 2 INTA
pcib0: unable to route slot 28 INTA
pcib0: unable to route slot 28 INTB
pcib1: <MPTable PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:43:b9:b2:ef
pcib3: <MPTable PCI-PCI bridge> irq 10 at device 28.1 on pci0
pci3: <PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc80-0xdcff mem 0xdf9fff80-0xdf9fffff irq 16 at device 0.0 on pci4
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:14:be:1d
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 20 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xcc800-0xcffff,0xcb000-0xcc7ff,0xca800-0xcafff,0xc0000-0xca7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Timecounter "TSC" frequency 2793012901 Hz quality 800
Timecounters tick every 1.000 msec
ad1: 194481MB <Maxtor 6Y200P0/YAR41BW0> [395136/16/63] at ata0-slave UDMA100
ad4: 38146MB <ST340014AS/8.12> [77504/16/63] at ata2-master SATA150
Mounting root from ufs:/dev/ad4s1a
WARNING: /storage was not properly dismounted
Accounting enabled
kernel conf:
machine i386
cpu I686_CPU
ident daemon-DanGer
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=0 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# output. Adds ~128k to driver.
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
device apic # I/O APIC
device isa
device pci
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device vga # VGA video card driver
device sc
device agp # support several AGP chipsets
device npx
device sio # 8250, 16[45]50 based serial ports
device miibus # MII bus support
device bge # Broadcom BCM570xx Gigabit Ethernet
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device bpf # Berkeley packet filter
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
device ukbd # Keyboard
makeoptions MODULES_OVERRIDE=""
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
options DEVICE_POLLING
options HZ=1000
device pf # required
device pflog # optional
device pfsync # optional
options ALTQ # alternate queueing
options ALTQ_CBQ # build the ``Class Based Queuing'' discipline.
# the moment as the conditioner is not used by any of the
# available disciplines or consumer.
options ALTQ_PRIQ # build the ``Priority Queuing'' discipline.
options QUOTA
options SC_DISABLE_REBOOT
options PQ_CACHESIZE=512 # color for 512k cache
--
Best regards
DanGer, ICQ: 261701668 | e-mail protecting at: http://www.2pu.net/
http://danger.rulez.sk | proxy list at: http://www.proxy-web.com/
| FreeBSD - The Power to Serve!
[ "So you just, like, popped in on Troi?" - Chafin ]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1831991265.20050618105200>