Date: Thu, 16 Jan 1997 08:37:19 -0500 From: Mike Tancsa <mike@sentex.net> To: Francois Pollet <fpollet@relay.perceval.net>, freebsd-hardware@freebsd.org Subject: Re: ASUS T2P4 and Adaptec 2940AU Message-ID: <3.0.32.19970116083719.0092a8f0@sentex.net>
next in thread | raw e-mail | index | archive | help
At 12:42 PM 1/16/97 +0100, Francois Pollet wrote: > >Troubles in reboot with 2.1.6-RELEASE > >ASUS P55T2P4 bios 1.08 >AHA2940AU bios 1.21 >Seagate ST32155N 2.1Gb firmware 0532 with a FreeBSD only partition and >standard MBR > >No problems during installation, geometry used is the geometry reported >by a DOS fdisk (261/255/63), no errors reported during installation > >Everything works perfectly after a power on > >2940AU hangs and fails to detect SCSI devices after a soft or a hard reboot >A real power on is always required to restart the machine > >First I thought it was a compatibility problem between the T2P4 and the 2940AU >but it seems to work fine with a DOS only partition > >Can somebody help ? I am sure its not what you wanted to hear, but I had the exact same problem with the above mentioned card on an ECS Pentium motherboard... I ended up bugging my distributor to find me a generic 2940.... I am very suprised that someone said they got that particular card working with 2.1.5. I could not even get 2.1.5 to recognize the card for what it was. ---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19970116083719.0092a8f0>