Date: Tue, 18 Jul 2000 22:00:21 +0200 From: "megelasr" <megelasr@club-internet.fr> To: <freebsd-questions@FreeBSD.org> Subject: NIC and sound cards Message-ID: <000a01bff0f3$b4b2d040$2cb624c3@clubinternet.fr>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hello everyone I have some questions for you because I cannnot solve some problems alone. 1. Does FreeBSD support SB Live 1024 Player ISAPNP sound card? in the affirmative what drivers are needed to emulate this card? 2. In the machine summarized below, is a non standard ISQPNP sound card <Pinnacle> MODEL, from Turtle Beach (voyetra now). This card does not appear in UserConfig. How to disable it in FreeBSD because it conflicts with the 3COM905CTX NIC CARD? 3. iN userConfig, on this machine, the response to the PPPSCAN command is: bad csn/ldn 0:0 on pci0. How to handle that? 4. This NIC controller (xl0) does not work under FreeBSD, it receives nothing (it is the ping result). Note: the same configuration with an ordinary D-LINK DFE530 works well! In the other hand the card is running quite well under an other OS. I think to an IRQ conflict. How to configure the IRQ, to IRQ 5 (to avoid problems I forced it in the BIOS)? Many thanks for your help. Raoul MEGELAS megelasr@club-internet.fr FreeBSD version: FreeBSD hostmane.mydomain 4.0-19990626-Current FreeBSD 4.0 19990626-current #12:mon July 1720-11-20 2000 root hostmane.mydomain/usr/src/sys/compile/BIPROC i386. dmesg.boot. Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-19990626-CURRENT #12: Mon Jul 17 20:11:20 CEST 2000 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III (686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,<b18>,MMX,FXSR,<b25>> real memory = 134205440 (131060K bytes) avail memory = 127098880 (124120K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02f9000. Pentium Pro MTRR support enabled Probing for PnP devices: npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vga-pci0: <Matrox model 0521 graphics accelerator> irq 16 at device 0.0 on pci1 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 4.1 on pci0 chip1: <UHCI USB controller> irq 19 at device 4.2 on pci0 chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0 xl0: <3Com 3c905C-TX Fast Etherlink XL> irq 19 at device 9.0 on pci0 xl0: Ethernet address: 00:50:da:45:75:60 xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps) ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 17 at device 11.0 on pci0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs isa0: <ISA bus> on motherboard fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> at fdc0 drive 0 wdc0 at port 0x1f0-0x1f7 irq 14 on isa0 wdc0: unit 0 (wd0): <IBM-DJNA-371350> wd0: 12949MB (26520480 sectors), 26310 cyls, 16 heads, 63 S/T, 512 B/S atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 SMP: AP CPU #1 Launched! changing root device to wd0s2a cd0 at ahc0 bus 0 target 2 lun 0 cd0: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present. . . . [-- Attachment #2 --] <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2> Hello everyone</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>I have some questions for you because I cannnot solve some problems alone.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>1. Does FreeBSD support SB Live 1024 Player ISAPNP sound card?<BR>in the affirmative what drivers are needed to emulate this card?</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>2. In the machine summarized below, is a non standard ISQPNP sound card<BR><Pinnacle> MODEL, from Turtle Beach (voyetra now).<BR>This card does not appear in UserConfig. How to disable it in FreeBSD<BR>because it conflicts with the 3COM905CTX NIC CARD?</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>3. iN userConfig, on this machine, the response to the PPPSCAN command is:<BR> bad csn/ldn 0:0 on pci0.<BR> How to handle that?</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>4. This NIC controller (xl0) does not work under FreeBSD, it receives<BR>nothing (it is the ping result).<BR>Note: the same configuration with an ordinary D-LINK DFE530 works well!<BR>In the other hand the card is running quite well<BR>under an other OS. I think to an IRQ conflict. How to configure the IRQ,<BR>to IRQ 5 (to avoid problems I forced it in the BIOS)?</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2> Many thanks for your help.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2> Raoul MEGELAS<BR> <A href="mailto:megelasr@club-internet.fr">megelasr@club-internet.fr</A></FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2> FreeBSD version:<BR>FreeBSD hostmane.mydomain 4.0-19990626-Current FreeBSD 4.0 19990626-current #12:mon July 1720-11-20 2000<BR>root hostmane.mydomain/usr/src/sys/compile/BIPROC i386.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2> dmesg.boot.<BR>Copyright (c) 1992-1999 The FreeBSD Project.<BR>Copyright (c) 1982, 1986, 1989, 1991, 1993<BR> The Regents of the University of California. All rights reserved.<BR>FreeBSD 4.0-19990626-CURRENT #12: Mon Jul 17 20:11:20 CEST 2000<BR>Timecounter "i8254" frequency 1193182 Hz<BR>CPU: Pentium III (686-class CPU)<BR> Origin = "GenuineIntel" Id = 0x673 Stepping = 3<BR> Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,<b18>,MMX,FXSR,<b25>><BR>real memory = 134205440 (131060K bytes)<BR>avail memory = 127098880 (124120K bytes)<BR>Programming 24 pins in IOAPIC #0<BR>FreeBSD/SMP: Multiprocessor motherboard<BR> cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000<BR> cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000<BR> io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000<BR>Preloaded elf kernel "kernel" at 0xc02f9000.<BR>Pentium Pro MTRR support enabled<BR>Probing for PnP devices:<BR>npx0: <math processor> on motherboard<BR>npx0: INT 16 interface<BR>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard<BR>pci0: <PCI bus> on pcib0<BR>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0<BR>pci1: <PCI bus> on pcib1<BR>vga-pci0: <Matrox model 0521 graphics accelerator> irq 16 at device 0.0 on pci1<BR>isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0<BR>ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 4.1 on pci0<BR>chip1: <UHCI USB controller> irq 19 at device 4.2 on pci0<BR>chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0<BR>xl0: <3Com 3c905C-TX Fast Etherlink XL> irq 19 at device 9.0 on pci0<BR>xl0: Ethernet address: 00:50:da:45:75:60<BR>xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)<BR>ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 17 at device 11.0 on pci0<BR>ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs<BR>isa0: <ISA bus> on motherboard<BR>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0<BR>fdc0: FIFO enabled, 8 bytes threshold<BR>fd0: <1440-KB 3.5" drive> at fdc0 drive 0<BR>wdc0 at port 0x1f0-0x1f7 irq 14 on isa0<BR>wdc0: unit 0 (wd0): <IBM-DJNA-371350><BR>wd0: 12949MB (26520480 sectors), 26310 cyls, 16 heads, 63 S/T, 512 B/S<BR>atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0<BR>atkbd0: <AT Keyboard> irq 1 on atkbdc0<BR>psm0: <PS/2 Mouse> irq 12 on atkbdc0<BR>psm0: model IntelliMouse, device ID 3<BR>vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0<BR>sc0: <System console> on isa0<BR>sc0: VGA <16 virtual consoles, flags=0x0><BR>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0<BR>sio0: type 16550A, console<BR>sio1 at port 0x2f8-0x2ff irq 3 on isa0<BR>sio1: type 16550A<BR>APIC_IO: Testing 8254 interrupt delivery<BR>APIC_IO: routing 8254 via pin 2<BR>SMP: AP CPU #1 Launched!<BR>changing root device to wd0s2a<BR>cd0 at ahc0 bus 0 target 2 lun 0<BR>cd0: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device <BR>cd0: 3.300MB/s transfers<BR>cd0: Attempt to query device size failed: NOT READY, Medium not present.<BR> . . .</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01bff0f3$b4b2d040$2cb624c3>