Date: Sun, 1 May 2016 18:05:22 +0300 From: Stanislav Galabov <sgalabov@gmail.com> To: Willem Jan Withagen <wjw@digiware.nl> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Mediatek / Ralink status Message-ID: <48872155-C822-4B18-9B00-1689692DD294@gmail.com> In-Reply-To: <572616AD.4020706@digiware.nl> References: <79DA8224-E857-4B86-81EC-D7A9E765E201@gmail.com> <572616AD.4020706@digiware.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
> Hi Stanislav, >=20 > I'm trying to boot my Witi board with the new -head. > On previous occasions I build a MT6720 version that booted. (I even > ignored the compression step for the time being, since lzma was giving > trouble) > And that worked for all things that were available then. (Even mounted a d= isk) > Got ARP REPLY, set server/gtwy eth addr (1c:6f:65:82:ec:12) > Got it > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################### > done > Bytes transferred =3D 3838128 (3a90b0 hex) > NetBootFileXferSize=3D 003a90b0 > Automatic boot of image at addr 0x80A00000 ... > ## Booting image at 80a00000 ... > Image Name: FreeBSD Kernel Image > Image Type: MIPS Linux Kernel Image (uncompressed) > Data Size: 3838064 Bytes =3D 3.7 MB > Load Address: 80001100 > Entry Point: 80001100 > Verifying Checksum ... OK > OK > No initrd > ## Transferring control to Linux (at address 80001100) ... > ## Giving linux memsize in MB, 256 >=20 > Starting kernel ... >=20 > FDT DTB at: 0x8037f570 > CPU clock: 880MHz > SYS clock: 220MHz > UART clock: 50MHz >=20 > U-Boot args (from 0 args): > None > Environment: > memsize=3D256 > initrd_start=3D0x00000000 > initrd_size=3D0x0 > flash_start=3D0x00000000 > flash_size=3D0x1000000 > entry: mips_init() > RAM size: 256MB (from memsize) > Cache info: > picache_stride =3D 4096 > picache_loopcount =3D 8 > pdcache_stride =3D 4096 > pdcache_loopcount =3D 8 > cpu0: MIPS Technologies processor v47.153 > MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) > L1 i-cache: 4 ways of 256 sets, 32 bytes per line > L1 d-cache: 4 ways of 256 sets, 32 bytes per line > L2 cache: 8 ways of 1024 sets, 32 bytes per line, 256 KiB total size > Config1=3D0xbea3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > Config2=3D0x80000447 > Config3=3D0x2000242c > Physical memory chunk(s): > 0x434000 - 0xfffffff, 264028160 bytes (64460 pages) > Maxmem is 0x10000000 > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2016 The FreeBSD Project. > [And the stuff boots.] >=20 > Now doing the same with the new kernel, it gets stuck at: >=20 > Bytes transferred =3D 5109292 (4df62c hex) > NetBootFileXferSize=3D 004df62c > Automatic boot of image at addr 0x80A00000 ... > ## Booting image at 80a00000 ... > Image Name: FreeBSD Kernel Image > Image Type: MIPS Linux Kernel Image (uncompressed) > Data Size: 5109228 Bytes =3D 4.9 MB > Load Address: 80001100 > Entry Point: 80001100 > Verifying Checksum ... OK > OK > No initrd > ## Transferring control to Linux (at address 80001100) ... > ## Giving linux memsize in MB, 256 >=20 > Starting kernel ... > [ And then the system freezes ] >=20 > Any suggestions on how to diagnose this freeze? Can you please post your build line? >=20 > Thanx, > --WjW
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48872155-C822-4B18-9B00-1689692DD294>