Date: Mon, 19 Aug 2002 18:52:19 +0200 From: Borje Josefsson <bj@dc.luth.se> To: freebsd-mobile@FreeBSD.ORG Subject: Nokia D211 GSM/HSCD/GPRS/802.11 multifunction card Message-ID: <200208191652.g7JGqJB76999@dc.luth.se>
index | next in thread | raw e-mail
Hello, Has anybody got the Nokia D211 multifunction card to work with FreeBSD? The card is a combined cell phone (with GSM/HSCD/GPRS) and 802.11. http://www.nokia.com/phones/nokiad211/specifications.html I am at first intrerested in getting the GPRS functions to work. Entering the card as a serial device (as in generic PCMCIA MODEM, which works with Nokia's other card phones) in pccard.conf and then tryping to connect with "tip" brings my system (4.6R) to a complete lockup. Nokia claims that the card is supported under Linux. The output from "pccardc dumpcis" is attached below. Any ideas on how to configure this beast?? With kind regards, --Borje Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 14 000: 07 00 4e 6f 6b 69 61 00 44 32 31 31 00 ff Version = 7.0, Manuf = [Nokia], card vers = [D211] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 24 01 20 11 PCMCIA ID = 0x124, OEM ID = 0x1120 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x22 (Functional EXT), length = 2 000: 01 07 Network technology: Wireless Tuple #6, code = 0x22 (Functional EXT), length = 5 000: 02 c0 d8 a7 00 Network speed: 11 Mb/sec Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 03 07 Network media: 2.4 GHz Tuple #8, code = 0x1a (Configuration map), length = 4 000: 00 01 f4 01 Reg len = 1, config register addr = 0xf4, last config = 0x1 Registers: X------- Tuple #9, code = 0x1b (Configuration entry), length = 19 000: c1 01 1e 71 55 36 c6 5a 35 01 8e 7f e5 13 5f 64 010: 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 100mA Max current average over 10 ms: 4 x 100mA, ext = 0x5a Power down supply current: 3 x 10mA Vpp pwr: Nominal operating supply voltage: 1.2 x 10V, ext = 0x7f Wait scale Speed = 1.2 x 1 us, scaled by 10 RDY/BSY scale Speed = 5.0 x 10 ms, scaled by 10 Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0xff (Terminator), length = 0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the messagehome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200208191652.g7JGqJB76999>