Date: Thu, 13 May 1999 11:21:44 -0700 From: Darryl Okahata <darrylo@sr.hp.com> To: Chuck Robey <chuckr@picnic.mat.net> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: IBM scsi drives Message-ID: <199905131821.LAA06990@mina.sr.hp.com> In-Reply-To: Your message of "Thu, 13 May 1999 13:59:01 EDT." <Pine.BSF.4.10.9905131354360.401-100000@picnic.mat.net>
index | next in thread | previous in thread | raw e-mail
Chuck Robey <chuckr@picnic.mat.net> wrote:
> Anyone got experience with an IBM scsi drive, DDRS34560W-LVD? Their web
> page says the LVD stands for low voltage differential, and I've got bad
> memories of dealing with Quantum differentials ... the IBM data says
> it's fully compatible, on my existing bus, with single-ended scsi (at a
> lower transfer rate, only 40MB), but I'm wondering.
It works. I'm currently using both an IBM 34560 LVD (4.5GB) and an
IBM 39130 LVD (9GB) in SE mode (I ordered "wide SCSI drives" and my
vendor shipped me LVD ones ;-). They're very nice, and are attached to
a Gigabyte 6BXDS (Adaptec 7895) motherboard. I also have another plain
F/W (not LVD) IBM 39130 on the same SE bus, and I'm using vinum to
stripe the LVD and plain F/W 93130 drives. They work well.
The only thing to note about LVD drives is that they have *NO*
provision for on-drive termination. All termination must be provided
elsewhere.
--
Darryl Okahata
darrylo@sr.hp.com
DISCLAIMER: this message is the author's personal opinion and does not
constitute the support, opinion, or policy of Hewlett-Packard, or of the
little green men that have been following him all day.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199905131821.LAA06990>