Date: Fri, 23 Sep 2016 09:58:40 +0800 From: Kevin Lo <kevlo@FreeBSD.org> To: Andriy Voskoboinyk <avos@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>, "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: Re: urtwn(4) / rtwn(4) drivers are merged - call for review / testing Message-ID: <20160923015840.GA77979@ns.kevlo.org> In-Reply-To: <op.yn6twvc34dikkl@localhost> References: <op.yjivmw1k4dikkl@localhost> <op.yjvko8zt4dikkl@localhost> <op.ym4deppz4dikkl@localhost> <op.yn1gyoq04dikkl@localhost> <20160922092442.GA72044@ns.kevlo.org> <op.yn6twvc34dikkl@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 22, 2016 at 01:54:21PM +0300, Andriy Voskoboinyk wrote: > > Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo <kevlo@freebsd.org>: > > Hi, > > So, the driver was fully tested. Thanks! > Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how big > the problem is? Sure. Here you go https://people.freebsd.org/~kevlo/rtl8188ce-debug.txt Thanks, Kevin > > Hi Andriy, > > > > First of all, THANK YOU! You're doing amazing work! > > Second, I've done some testing on the following devices, downloading > > FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from > > ftp.freebsd.org: > > > > - ASUS USB-N10 NANO (RTL8188CUS): > > rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev 2.00/2.00, addr > > 3> on usbus0 > > rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > > > > - TP-Link TL-WN725N v2 (RTL8188EU): > > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on > > usbus0 > > rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R > > > > - D-Link DWA-131 (RTL8192CU): > > rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev 2.00/2.00, addr > > 3> on usbus0 > > rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R > > > > - TP-Link Archer T4U (RTL8812AU): > > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 7> on > > usbus0 > > rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R > > > > - D-Link DWA-171 rev A1 (RTL8821AU): > > rtwn0: <802.11n WLAN Adapter> on usbus0 > > rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R > > > > - RTL8188CE mini pcie: > > rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem > > 0x90800000-0x90803fff irq 17 at device 0.0 on pci1 > > rtwn0: r92ce_attach: warning: hardware crypto enabled > > rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R > > > > All seems to be ok, except RTL8188CE PCIe adapter doesn't work: > > > > rtwn0: r92ce_post_init: warning: net80211 ratectl is used > > rtwn0: device timeout > > > > Kevin > > > > On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk wrote: > >> > >> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy Voskoboinyk > >> <avos@freebsd.org>: > >> > >> Now it resides on https://github.com/s3erios/freebsd-rtwn (integrated > >> into src tree, so it can be built with 'make buildkernel' / 'make > >> buildworld'). > >> > >> This the last stage; once all reported issues will be resolved, I'm > >> going to merge it into HEAD. > >> > >> > Hi everyone, > >> > > >> > rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were merged > >> > into a > >> > single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the code is > >> > available on https://github.com/s3erios/rtwn repository. Among > >> bugfixes / > >> > code deduplication, there some new features too: > >> > > >> > 1) multi-vap support (one any wireless interface + one STA interface + > >> > any number of monitor mode interfaces). > >> > 2) few new sysctls: > >> > * dev.rtwn.#.crypto - controls how to use hardware crypto > >> acceleration > >> > * dev.rtwn.#.ratectl_selected > >> > * dev.rtwn.#.ratectl - selects current 'rate control' algorithm > >> > (currently only 'none' and 'net80211' are supported; RTL8192CE needs > >> > testing > >> > with the last). > >> > 3) (incomplete) power management support for RTL8188EU (requires > >> > firmware). > >> > 4) Short Guard Interval support. > >> > > >> > It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; however, > >> > it was never tested with RTL8192CE or RTL8812AU. > >> > > >> > How-to-build: > >> > 1) download / checkout the repository. > >> > 2) apply 'patch-usbdevs.diff' against '/usr/src' > >> > 3) build and install rtwn module: > >> > cd $repository/sys/modules/rtwn && make && make install > >> > 4) build and install rtwn_usb/rtwn_pci: > >> > cd ../rtwn_usb && make && make install > >> > cd ../rtwn_pci && make && make install > >> > 5) unload previous && load current drivers: > >> > kldunload if_urtwn if_rtwn > >> > kldload /boot/modules/if_rtwn.ko /boot/modules/if_rtwn_usb.ko > >> > /boot/modules/if_rtwn_pci.ko > >> > 6) Use. > >> _______________________________________________ > >> freebsd-wireless@freebsd.org mailing list > >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >> To unsubscribe, send any mail to > >> "freebsd-wireless-unsubscribe@freebsd.org" > >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160923015840.GA77979>