Date: Fri, 10 Feb 2006 15:21:05 GMT From: Jürgen Dankoweit <Juergen.Dankoweit@T-Online.de> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/93128: FreeBSD 6.1 BETA 1 has problems with Symbios/LSI-HBAs Message-ID: <200602101521.k1AFL5ti038446@www.freebsd.org> Resent-Message-ID: <200602101530.k1AFU42D094966@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 93128 >Category: kern >Synopsis: FreeBSD 6.1 BETA 1 has problems with Symbios/LSI-HBAs >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Feb 10 15:30:04 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Jürgen Dankoweit >Release: FreeBSD 6.1 Beta 1 >Organization: >Environment: Impossible to write down uname -a because system hangs and therefore I get no shell >Description: Both systems are Siemens Primergy 470, dual PIII 450 MHz, two LSI 83C895 SCSI-HBAs (one onboard and one on a separate PCI card). At the onboard HBA all HDDs are LVD drives. At the second only single ended devices are connected. The termination is correct. On both systems it is imposisible to install FreeBSD 6 because it hangs at this position: (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS mode change from SE to SE. here stops the system. After about five minutes the following messages are shown character for character. da0 at sym0 bus 0 target 0 lun 0 da0: <COMPAQ BD036735C8 B020> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) And here nothing goes on. Exactly this behavior was on FreeBSD 5.3 STABLE-1. It was fixed with FBSD 5.3 STABLE-2. FreeBSD 5.4 runs also perfect on these machines. But in the new version of FreeBSD the same bug comes again. On the production machines it is impossible to install or upgrade the new FreeBSD 6 to do more tests. Removing one HBA doesn't solve the problem. >How-To-Repeat: Rebootinmg with tzhe actual FreeBSD 6.1 Beta 1 >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200602101521.k1AFL5ti038446>