Date: Sat, 24 Jan 2004 22:58:58 -0500 From: Dev Tugnait <dev@unixdaemon.org> To: Bill Paul <wpaul@FreeBSD.ORG> Cc: freebsd-hardware@freebsd.org Subject: Re: Project Evil: The Evil Continues Message-ID: <20040125035858.GB82300@daemon.unixdaemon.org> In-Reply-To: <20040125034900.1570F16A4CF@hub.freebsd.org> References: <20040125034900.1570F16A4CF@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
What in the world is Project Evil? * Bill Paul (wpaul@FreeBSD.ORG) wrote: > > Previously, I had asked for help getting the Intel Centrino wireless > cards to work with Project Evil, and thanks to various wonderful people, > a couple of Centrino cards and a miniPCI-to-PCI adapter turned up on > Project Evil Labs' doorstep. The Centrino NDIS driver now works > correctly. (The problem turned out to be that I wasn't initializing > some special flags in ndis_packet structures). > > Now I'm trying to get a handle on getting support done for all > the remaining unsupported 802.11 chipsets out there. There are a > couple that I know don't work, and a few which might work, but I > don't know for sure since I don't have them. > > Right now, it looks like all of the Broadcom-based cards should be > supported, as well as the Centrino cards. There are various ethernet > cards that I've tested which work as well. I am looking for success > or failure reports concerning the following devices: > > - nVidia MCP ethernet, integrated into the nVidia nForce2 chipset. > This driver should work using the nvenet.sys driver for Windows > which is available from nVidia's web site. Note: recent versions > of the driver consist of just two files: the nvenet.sys binary > module, and its accompanying .inf file. However some of the older > driver distributions included a couple of additional firmware/microcode > files that nvenet.sys would try to load at runtime. If you have one > of these older drivers, put the firmware/microcode files in > /compat/ndis, and the driver should load them correctly. > > - RealTek RTL8180 wireless LAN chipset. I have been unable to find > a card with this chip in any of my local computer stores. The > RealTek driver for this chip _should_ work. I'm pretty sure all > of the routines it calls are implemented. > > - ADMtek 8211 wireless LAN chipset. This one should also work, but I > can't find any cards with this chipset in my local computer stores. > > - Intel PRO/5000 wirless card. This is apparently an Atheros 5210 > chipset. I have been told the wl50nd5.sys driver for this card > crashes when you call its reset method, but again I don't have one of > these so I can't confirm this or figure out what the problem is. > > - AMD Am1771/Am1772 wireless LAN chipset. This one probably won't > work: the supplied AMD driver calls lots of functions in ntoskrnl.exe > which I haven't implemented yet. This chipset is present on the > SMC 2602w version 3 card. I repeat: that's the SMC 2602w VERSION THREE. > The version 1 card is a Prism chipset. I don't know what the v2 card is. > > - Texas Instruments ax100 chipset. I'm not sure if this one works or > not. This chipset has been reverse-engineered and there is a native > FreeBSD driver available, but I'm still curious to see if it works > with the NDISulator. > > - Atheros chipsets. Of course, we have the ath(4) driver to support > these, but it would be nice to know which ones work (or do not work) > with the NDISulator. > > - Any other PCI or cardbus NIC that I've overlooked which isn't currently > supported by an existing native driver. > > If you have a system with one of these chipsets, please give the > NDISulator a try. Note: you do NOT have to recompile your kernel to > test it. Find the .sys and .inf files from your Windows driver media > and do the following: > > # cp foo.sys foo.inf /sys/modules/if_ndis > # cd /sys/modules/ndis > # make; make load > # cd /sys/modules/if_ndis > # ndiscvt -i foo.inf -s foo.sys -o ndis_driver_data.h > # make; make load > > You don't even have to reboot. Well, not unless the driver causes > a panic. :/ > > If the NIC works, that's great! Drop me a line letting me know, so I > can cross it off the list. If it doesn't work, please do the > following: > > - Describe the failure to me _in_ _detail_. DON'T LOAD THE DRIVER > WITH X RUNNING. (I hate it when people do that. If for some reason > there's a panic, you'll never see it unless you're watching the > console. If X is running, it will just look like the system froze, > and you won't be able to tell what happened.) If you see messages > of the form "No match for <ConfusingWindowsFunctionName>" on the > console, then the driver is trying to call some functions that I > haven't implemented yet. In very rare cases, the driver may still > work, but don't bet on it. Make a note of all console messages that > appear when you try to load the driver module. And send them to me, > along with a description of what card you have and whar Windows driver > module you used. > > - Tell me where you got your card so I can try to get one too. As with > the Centrino, it's not always possible to debug these problems without > actual hardware. > > - If you're feeling really generous, loan me your card for a while so > I can coerce^Wcoax it into working. (This doesn't apply to NICs > that are integrated into your system.) > > Again, we at Project Evil appreciate your assistance in our efforts > to dominate^Wimprove the world. If you decide to loan us your hardware, > please send it do: > > Attn: Bill Paul > Wind River Systems > 500 Wind River Way > Alameda, CA. 94102 > USA > > Project Evil: when it absolutely, positively has to be evil overnight. > > -Bill > > -- > ============================================================================= > -Bill Paul (510) 749-2329 | Senior Engineer, Master of Unix-Fu > wpaul@windriver.com | Wind River Systems > ============================================================================= > <adamw> you're just BEGGING to face the moose > ============================================================================= > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" ---++--- ---------GnuPGPVer 1.2.3-------------------------------------------------- pub 1024D/B9046473 2003-11-21 Dev Tugnait (Freebsd) <dev@unixdaemon.org> Key fingerprint = F690 6725 1930 6FBE C05A FE4D 6CB1 34C1 B904 6473 sub 1024g/F8F019DF 2003-11-21 --------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040125035858.GB82300>