Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 05 Jan 2003 13:37:47 -0500
From:      "Magnus Johansson" <lmj@mail.usa.com>
To:        stacey@vickiandstacey.com
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: Network cards for a firewall server?
Message-ID:  <20030105183747.28156.qmail@usa.com>

next in thread | raw e-mail | index | archive | help
Hello


Currently the FA310-cards are installed.

The mobo is the last versio of Abit BE6-II, (with a PIII 850MHz).

It starts with the message:
"dc0: failed to force tx and rx to idle state", then the "dc0: watchdog timeout" messages starts showing up.

PnP is disabled in BIOS.

From dmesg I have:
dc0: <82c169 PNIC 10/100BaseTX> port 0xc400 - 0xc4ff mem 0xd3402000 - 0xd34020ff irq 11 at device 9.0 on pci0
dc0: Ethernet address: 00:a0:cc:d5:b2:e3
dc1: <82c169 PNIC 10/100BaseTX> port 0xc800 - 0xc8ff mem 0xd3403000 - 0xd34030ff irq 5 at device 11.0 on pci0
dc1: Ethernet address: 00:a0:cc:d5:dd:c8

Thanks for a quick reply.
Magnus

----- Original Message -----
From: Stacey Roberts <stacey@vickiandstacey.com>
Date: 05 Jan 2003 18:13:11 +0000
To: Magnus Johansson <lmj@mail.usa.com>
Subject: Re: Network cards for a firewall server?

> Hello,
> 
> On Sun, 2003-01-05 at 18:01, Magnus Johansson wrote:
> > Hello everyone
> > 
> > I am trying to build a firewall server with FreeBSD 4.7, but I'm having some problems with the network cards.
> > 
> > When I install it with two Netgear FA-310TX network cards, I get the "dc0: watchdog timeout" messages.
> > 
> > If I try two Intel PRO/100 cards, I get the "fxp0: DMA timeout" and "fxp0: SCB timeout" messages.
> > 
> > Searching the mailing lists the problems for both these types of cards seems to be reasonably well known. I tried moving the cards around the
> > PCI-slots, but without any success.
> 
> What motherboard are you using? Can you post each card's dmesg entries
> here?
> 
> Initially, you might want to ensure that the P 'n P OS options in the
> BIOS settings are disabled.
> 
> > 
> > Anyone who can recommend network cards with less problems for a firewall server (or knows the solution to these problems).
> > 
> 
> Check back with that info and and when you can.
> 
> Regards,
> 
> Stacey
> 
> > Thanks
> > Magnus
> > 
> > (I am not on the mailing list)
> -- 
> Stacey Roberts
> B.Sc (HONS) Computer Science
> 
> Web: www.vickiandstacey.com
> 
> 

-- 
_______________________________________________
Get your free email from http://mail.usa.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030105183747.28156.qmail>