Date: Tue, 2 Sep 2003 10:23:02 +0200 From: Jan Srzednicki <winfried@student.agh.edu.pl> To: Soren Schmidt <sos@spider.deepcore.dk> Cc: current@freebsd.org Subject: Re: ATAng probe updated please test Message-ID: <20030902082302.GC6853@student.agh.edu.pl> In-Reply-To: <200309011116.h81BG0d3013061@spider.deepcore.dk> References: <200309011116.h81BG0d3013061@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--GvXjxJ+pjyke8COw Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Sep 01, 2003 at 01:16:00PM +0200, Soren Schmidt wrote: > > I've gone over the probe code once again. > > Please test, and in case it fails to detect or misdetects anything, > mail me the output of dmesg from a verbose boot, and state what > devices actually are there. Hello, The new stuff still failed to detect properly my hardware. Whole dmesg is attached. But, mysteriously, after two reboots the problem vanished, and I can see my HW as I should: GEOM: create disk ad0 dp=0xc409ee70 ad0: 19546MB <FUJITSU MPF3204AT> [39714/16/63] at ata0-master UDMA66 GEOM: create disk ad1 dp=0xc409ed70 ad1: 39093MB <FUJITSU MPG3409AH EF> [79428/16/63] at ata0-slave UDMA66 acd0: CDROM <CD-540E> at ata1-master UDMA33 acd1: CDRW <CD-W540E> at ata1-slave UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [348277 x 2048 byte records] cd1 at ata1 bus 0 target 1 lun 0 cd1: <TEAC CD-W540E 1.0C> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: cd present [1 x 0 byte records] (this funny phantom CD inside of my drives is still there ;) I don't have any idea why this thing was not working in the begining. I did not touch anything, I swear. ;) Anyway, On the new kernel, reboot (after waiting for all the fsck's to finish) resulted in panic when syncer was called to flush everything. This has happened only once, I cannot reproduce it, yet the syncer problem (giving up on 1 buffer) persist. It is not a problem with the aio module, as I have removed it, and it still happens. Willing to provide more feedback, if I knew how.. greets, -- -- wrzask --= v =-- Winfried --===-- GG# 3838383 --- -- w@dream.vg --- w@303.krakow.pl --===-- http://violent.dream.vg/ --- --=< Ride the wild wind - push the envelope, don't sit on the fence, --- -- Ride the wild wind - live life on the razor's edge! >=-- Queen -- --GvXjxJ+pjyke8COw Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #8: Tue Sep 2 00:08:11 CEST 2003 root@stronghold:/usr/obj/usr/src/sys/MOONDANCE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0546000. Preloaded elf module "/boot/kernel/mga.ko" at 0xc0546200. Preloaded elf module "/boot/kernel/aio.ko" at 0xc05462a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0546350. Calibrating clock(s) ... i8254 clock: 1193155 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 600025865 Hz CPU: AMD Duron(tm) Processor (600.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x630 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 1 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x000000000056d000 - 0x000000001f6c9fff, 521523200 bytes (127325 pages) avail memory = 515391488 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00faee0 bios32: Entry = 0xfb350 (c00fb350) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb380 pnpbios: Found PnP BIOS data at 0xc00fbe50 pnpbios: Entry = f0000:be80 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA694 AWRDACPI> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdd00 PCI-Only Interrupts: 5 10 11 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 ---- before setting priority for links ------------ \\_SB_.PCI0.LNKD: interrupts: 1 3 4 5 6 7 10 11 12 14 15 penalty: 100770 1770 1770 1470 1770 1770 1470 1470 1770 10770 10770 references: 7 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.LNKD: interrupts: 1 3 4 5 6 7 10 11 12 14 15 penalty: 100770 1770 1770 1470 1770 1770 1470 1470 1770 10770 10770 references: 7 priority: 86271 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \\_SB_.PCI0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d5000000, size 24, enabled found-> vendor=0x1106, dev=0x0305, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x8305, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0686, revid=0x22 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x10 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3057, revid=0x30 bus=0, slot=7, func=4 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 6, enabled pcib0: matched entry for 0.9.INTA (source \\_SB_.PCI0.LNKB) pcib0: slot 9 INTA is routed to irq 5 found-> vendor=0x1274, dev=0x5880, revid=0x02 bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=5 powerspec 1 supports D0 D2 D3 current D3 map[10]: type 4, range 32, base 0000e000, size 8, enabled map[14]: type 1, range 32, base d6000000, size 8, enabled pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.LNKC) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd5000000-0xd5ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 240M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd2000000-0xd4ffffff pcib1: prefetched decode 0xd0000000-0xd1ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d0000000, size 25, enabled map[14]: type 1, range 32, base d2000000, size 14, enabled map[18]: type 1, range 32, base d3000000, size 23, enabled pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.LNKA) pcib0: slot 1 INTA is routed to irq 10 pcib1: slot 0 INTA is routed to irq 10 found-> vendor=0x102b, dev=0x0525, revid=0x82 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 drm0: <Matrox G400/G450 (AGP)> mem 0xd3000000-0xd37fffff,0xd2000000-0xd2003fff,0xd0000000-0xd1ffffff irq 10 at device 0.0 on pci1 info: [drm] AGP at 0xd5000000 16MB info: [drm] Initialized mga 3.1.0 20021029 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0x01 lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-slave: stat=0x80 err=0xff lsb=0x7f msb=0xff ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=7f devices=0x4<ATAPI_MASTER> ata1-slave: ATA err=0x01 lsb=0xa5 ata1: reset tp3 devices=0x6<ATAPI_MASTER,ATA_SLAVE> ata1: at 0x170 irq 15 on atapci0 pcm0: <Creative CT5880-C> port 0xdc00-0xdc3f irq 5 at device 9.0 on pci0 pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap 711000, 1000; 0xc407d000 -> 711000 pcm0: sndbuf_setmap 70f000, 1000; 0xc407b000 -> 70f000 rl0: <RealTek 8139 10/100BaseTX, rev. C> port 0xe000-0xe0ff mem 0xd6000000-0xd60000ff irq 11 at device 10.0 on pci0 rl0: Ethernet address: 00:e0:7d:b4:33:16 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: EPP SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0 pmtimer0 on isa0 adv0 failed to probe on isa0 aha0 failed to probe on isa0 aic0 failed to probe on isa0 bt0 failed to probe on isa0 cs0 failed to probe at port 0x300 on isa0 ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300 on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0 failed to probe at port 0x300 irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 600025865 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default lo0: bpf attached IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ata1: spurious interrupt - status=0x00 error=0x01 reason=0x01 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ad0: setting UDMA66 on VIA 82C686A chip GEOM: create disk ad0 dp=0xc409ee70 ad0: <FUJITSU MPF3204AT/0028> ATA-5 disk at ata0-master ad0: 19546MB (40031712 sectors), 39714 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 [0] f:80 typ:11 s(CHS):0/1/1 e(CHS):229/254/63 s:63 l:3694887 [1] f:00 typ:165 s(CHS):230/0/1 e(CHS):1023/254/63 s:3694950 l:20964825 [2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:24659775 l:10474380 [3] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/254/63 s:35134155 l:4883760 GEOM: Configure ad0s1, start 32256 length 1891782144 end 1891814399 GEOM: Configure ad0s2, start 1891814400 length 10733990400 end 12625804799 GEOM: Configure ad0s3, start 12625804800 length 5362882560 end 17988687359 GEOM: Configure ad0s4, start 17988687360 length 2500485120 end 20489172479 ad1: setting UDMA66 on VIA 82C686A chip GEOM: create disk ad1 dp=0xc409ed70 ad1: <FUJITSU MPG3409AH EF/C3C5> ATA-5 disk at ata0-slave ad1: 39093MB (80063424 sectors), 79428 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA66 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error ata1-slave: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> ata1-slave: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin GEOM: Configure ad0s2a, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad0s2b, start 0 length 536870912 end 536870911 GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399 GEOM: Configure ad0s2d, start 1073741824 length 9660248576 end 10733990399 acd0: setting UDMA33 on VIA 82C686A chip acd0: <CD-540E/1.0A> CDROM drive at ata1 as master acd0: read 6890KB/s (6890KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm audio disc (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe2:ata0:0:0:0): error 22 (probe2:ata0:0:0:0): Unretryable Error (probe3:ata0:0:1:0): error 22 (probe3:ata0:0:1:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device pass0: Serial Number \^_ pass0: 33.000MB/s transfers cd0 at ata1 bus 0 target 0 lun 0 cd0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device cd0: Serial Number \^_ cd0: 33.000MB/s transfers cd0: cd present [348277 x 2048 byte records] GEOM: Configure ad0s3a, start 0 length 5362882560 end 5362882559 GEOM: Configure ad0s3c, start 0 length 5362882560 end 5362882559 GEOM: new disk ad1 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):886/254/63 s:63 l:80051832 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 40986537984 end 40986570239 GEOM: Configure ad1s1b, start 0 length 536870912 end 536870911 GEOM: Configure ad1s1c, start 0 length 40986537984 end 40986537983 GEOM: Configure ad1s1d, start 536870912 length 40449667072 end 40986537983 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted /: mount pending error: blocks 108 files 3 start_init: trying /sbin/init WARNING: /usr was not properly dismounted WARNING: /home2 was not properly dismounted WARNING: /home was not properly dismounted Linux ELF exec handler installed linprocfs registered splash: image decoder found: daemon_saver --GvXjxJ+pjyke8COw--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030902082302.GC6853>