Date: Mon, 26 Nov 2001 13:42:10 -0800 From: "Rev. Joe Doyle" <doyle@nebcorp.com> To: freebsd-questions@freebsd.org Subject: cdda2wav segfaulting Message-ID: <20011126134210.D12873@nebcorp.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hello, I just updated to FreeBSD 4.4-STABLE, and since then,
cdda2wav has been segfaulting:
please:OBJ/i386-freebsd-cc> ./cdda2wav -O wav -D /dev/acd0a foo.wav
cdrom device (/dev/acd0a) is not of type generic SCSI. Setting interface
to cooked_ioctl.
266240 bytes buffer memory requested, 4 buffers, 27 sectors
#Cdda2wav version 1.10_freebsd_4.4-stable_i386_i386 real time sched.
soundcard support
AUDIOtrack pre-emphasis copy-permitted tracktype channels
1-11 no no audio 2
Table of Contents: total tracks:11, (total time 857793:44.30)
1.(633077:45.45), 2.(295698:29.25), 3.(355976:59.23), 4.(531846:32.40), 5.(828826:30.46) 6.(731804:06.14), 7.(724493:15.23), 8.(180879:21.45), 9.(583168:30.54), 10.(426712:10.50), 11.(337495:53.45), lead-out(3860071680)
CDINDEX discid: PJB4VosOwU_qo_BDdwqhQqs1vNE-
CDDB discid: 0x7355660b
CD-Text: not detected
CD-Extra: not detected
W Sector offset 0 exceeds track size (ignored)
End track is no valid audio track (ignored)
samplefile size will be 346030124 bytes.
recording -19281565.-3648 seconds stereo with 16 bits @ 44100.0 Hz
->'foo'...
overlap:min/max/cur, jitter, percent_done:
??/??/??/??????? 0%Sorry, this driver and/or drive does not support cdda reading.
cooked: Read cdda : Invalid argument
sector 0 + 2848849920, buffer 28136000 + 41000
request defined buff:: Bad file descriptor
parent writer sem request failed
zsh: segmentation fault (core dumped) ./cdda2wav -O wav -D /dev/acd0a foo.wav
It's reading the CD and getting track data and doing the checksum
for cddb lookups, but chokes on the reading of the data. I've tried
rebuilding cdda2wav (from the cdrtools port), to no avail. Here is the
output of uname -a:
FreeBSD please.tellme.com 4.4-STABLE FreeBSD 4.4-STABLE #0: Fri Nov 16
19:53:32 PST 2001 root@please.tellme.com:/usr/obj/usr/src/sys/PLEASE
i386
I'm also including my kernel conf, though that has not changed
since cdda2wav stopped working. Any tips would be appreciated.
-Joe
[-- Attachment #2 --]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.21 2001/01/12 23:45:14 scottl Exp $
machine i386
cpu I686_CPU
ident PLEASE
maxusers 32
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options USER_LDT
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# sound
device pcm
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011126134210.D12873>