Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 1 May 2009 15:18:42 -0300 (BRT)
From:      "Nenhum_de_Nos" <matheus@eternamente.info>
To:        "Gavin Atkinson" <gavin@FreeBSD.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: ata and seagate microdrive problems
Message-ID:  <caa579628753c26589a0e0bf6988ebfb.squirrel@10.1.1.10>
In-Reply-To: <1239874051.12971.1.camel@buffy.york.ac.uk>
References:  <00652174bdc7334a1a2d3d8db7c667a7.squirrel@10.1.1.10> <1239874051.12971.1.camel@buffy.york.ac.uk>

next in thread | previous in thread | raw e-mail | index | archive | help

On Thu, April 16, 2009 06:27, Gavin Atkinson wrote:
> On Thu, 2009-04-09 at 19:03 -0300, Nenhum_de_Nos wrote:
>> hail,
>>
>> I'm trying to install current on via itx using ide 44pin to cf adapter
>> and
>> a seagate 8GB microdrive.
>>
>> I thought it was to be ok, but just today when I received the adapter I
>> got nowhere in this. I tried 7.1-STABLE and 8.0-CURRENT from 200902, and
>> both fail to find it. the same thing in 7.1R.
>
> Can you boot in verbose mode, and post the dmesg somewhere please?
> Also, can you confirm which ATA channel the drive should show up on?
>
> Thanks,
>
> Gavin

sorry for the long delay, too busy :(

but tell me how to boot in debug, as I can't boot it from itself, and I
don't have any serial cable. just say what to do, and I'll try my best.

I must run current for what I want to do with it, thats my only limit.

thanks,

matheus

>> I found this http://forums.freebsd.org/archive/index.php/t-2733.html,
>> but
>> hw.ata.ata_dma_check_80pin=0 is no good :(
>>
>> and found this pr
>> http://lists.freebsd.org/pipermail/freebsd-bugs/2007-March/022884.html
>> as
>> the only pr that mentions microdrive (I may be wrong).
>
>


-- 
We will call you cygnus,
The God of balance you shall be




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?caa579628753c26589a0e0bf6988ebfb.squirrel>