Date: Thu, 20 Aug 2009 09:15:35 +0200 From: Milan Obuch <freebsd-usb@dino.sk> To: freebsd-usb@freebsd.org Subject: Huawei E169 and microSD Message-ID: <200908200915.36134.freebsd-usb@dino.sk>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_XgPjK5l68pG13+7 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, I tested E169 with both 7.2 and 8.0, with u3g loaded it works well here. Download speed 256 kBps is quite good I think. There is possibility to insert microSD into it and this one does not work. In 7.2, microSD is not even detected (see attached log-e169-72). In 8.0, microSD is detected, device created (in my case /dev/da1), but trying to use it gives dd if=/dev/da1 dd: /dev/da1: Device not configured error. And it is not a hardware problem, because I was able to initialize this card in Windows. Also, built-in autoinstall flash presented as CD works well. Some time ago I was able to do some tests with E170. In this case, microSD worked out of the box, at that time, tested only with 8.0. Has anybody any idea, what's wrong here? Something to test? Regards, Milan --Boundary-00=_XgPjK5l68pG13+7 Content-Type: text/plain; charset="iso 8859-15"; name="log-e169-80" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="log-e169-80" u3g_huawei_init:269: usb_alloc_device:1781: Found Huawei auto-install disk! ugen1.2: <vendor 0x12d1> at usbus1 ugen1.2: <vendor 0x12d1> at usbus1 (disconnected) uhub_reattach_port:440: could not allocate new device! ugen1.2: <vendor 0x12d1> at usbus1 u3g0: <Data Interface> on usbus1 u3g0: Found 3 ports. umass1: <vendor 0x12d1 HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0000 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): Unretryable error cd0 at umass-sim1 bus 1 target 0 lun 0 cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (probe0:umass-sim1:1:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim1:1:0:1): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:1): SCSI Status: Check Condition (probe0:umass-sim1:1:0:1): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:1): Medium not present (probe0:umass-sim1:1:0:1): Unretryable error da1 at umass-sim1 bus 1 target 0 lun 1 da1: <HUAWEI SD Storage 2.31> Removable Direct Access SCSI-2 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present --Boundary-00=_XgPjK5l68pG13+7--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200908200915.36134.freebsd-usb>