Date: Thu, 22 Mar 2001 12:38:50 +0200 (EET) From: Domas Mituzas <midom@delfi.lt> To: stable@freebsd.org Subject: kernel panic on 4.3-RC Message-ID: <Pine.BSF.4.21.0103221236410.67645-100000@axis.tdd.lt>
next in thread | raw e-mail | index | archive | help
this is what I get on my ISP2150 box, 4.2-GENERIC works well, this
configuration I use right now also worked on previous 4.2-stable builds.
boot-v-/kerneltext=0x15563d-\|data=0x23c5c+0x1b298|syms=[0x4+0x22710+0x4+0x2735d\SMAP
ty
pe=01 base=00000000 00000000 len=00000000 0009f400
SMAP type=02 base=00000000 0009f400 len=00000000 00000c00
SMAP type=02 base=00000000 000e8000 len=00000000 00018000
SMAP type=01 base=00000000 00100000 len=00000000 3fef0000
SMAP type=03 base=00000000 3fff0000 len=00000000 0000fc00
SMAP type=04 base=00000000 3ffffc00 len=00000000 00000400
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RC #4: Thu Mar 22 12:25:29 EET 2001
root@miss4.delfi.lt:/usr/src/sys/compile/MISS
Calibrating clock(s) ... TSC clock: 796636319 Hz, i8254 clock: 1193329 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (796.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00309000 - 0x3ffe7fff, 1070460928 bytes (261343 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 1042718720 (1018280K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00f6c20
bios32: Entry = 0xfd7e3 (c00fd7e3) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x430
pnpbios: Found PnP BIOS data at 0xc00f6c50
pnpbios: Entry = f0000:ad32 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6ac0
Preloaded elf kernel "kernel" at 0xc02e0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x71a0, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x71a1, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=1
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x9005, dev=0x005f, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 64, base f4100000, size 12
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x9005, dev=0x005f, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base 00002400, size 8
map[14]: type 1, range 64, base f4101000, size 12
IOAPIC #0 intpin 21 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base f4102000, size 12
map[14]: type 1, range 32, base 00002800, size 6
map[18]: type 1, range 32, base f4000000, size 20
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00002860, size 4
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 00002840, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00001040, size 4
found-> vendor=0x1013, dev=0x00bc, revid=0x23
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f6000000, size 25
map[14]: type 1, range 32, base f4103000, size 12
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1011, dev=0x0023, revid=0x06
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on
pci1
IOAPIC #0 intpin 20 -> irq 9
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x0c
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f4220000, size 12
map[14]: type 1, range 32, base 00003000, size 6
map[18]: type 1, range 32, base f4200000, size 17
pci2: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x303f mem
0xf4200000-0xf421
ffff,0xf4220000-0xf4220fff irq 9 at device 4.0 on pci2
fxp0: Ethernet address 00:02:b3:2b:02:e2
bpf: fxp0 attached
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem
0xf4100000
-0xf4100fff irq 2 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem
0xf4101000
-0xf4101fff irq 2 at device 12.1 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 423 instructions downloaded
aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs
using shared irq2.
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem
0xf4000000-0xf40f
ffff,0xf4102000-0xf4102fff irq 5 at device 14.0 on pci0
fxp1: Ethernet address 00:d0:b7:a9:09:98
bpf: fxp1 attached
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> (vendor=0x8086, dev=0x7111) at 18.1
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086,
dev=0x7112) at 1
8.2 irq 5
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device
18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> (vendor=0x1013, dev=0x00bc) at
20.0
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
pci-: pci1 exists, using next available unit number
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
isa_probe_children: probing PnP devices
SMP: enabled INTs: 2, 3, 4, 5, 6, 9, apic_imen: 0x00fffd83
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
3:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled,
default to accept, logging disabled
Waiting 10 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(probe6:ahc0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:ahc0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:ahc0:0:6:0): Invalid field in CDB
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period a, offset 7f
(ahc0:A:0:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 0 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:2:0): Sending WDTR 1
(ahc0:A:2:0): Received WDTR 1 filtered to 1
ahc0: target 2 using 16bit transfers
(ahc0:A:2:0): Sending SDTR period a, offset 7f
(ahc0:A:2:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 2 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:1:0): Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: target 1 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period a, offset 7f
(ahc0:A:1:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 1 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:3:0): Sending WDTR 1
(ahc0:A:3:0): Received WDTR 1 filtered to 1
ahc0: target 3 using 16bit transfers
(ahc0:A:3:0): Sending SDTR period a, offset 7f
(ahc0:A:3:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 3 synchronous at 40.0MHz, offset = 0x3f
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <QUANTUM ATLAS_V__9_SCA 0230> Fixed Direct Access SCSI-3 device
pass0: Serial Number 149023653592
pass0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <QUANTUM ATLAS_V__9_SCA 0230> Fixed Direct Access SCSI-3 device
pass1: Serial Number 149023653551
pass1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
pass2 at ahc0 bus 0 target 2 lun 0
pass2: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
pass2: Serial Number 143028352051
pass2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
pass3 at ahc0 bus 0 target 3 lun 0
pass3: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
pass3: Serial Number 143028352478
pass3: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
pass4 at ahc0 bus 0 target 6 lun 0
pass4: <ESG-SHV SCA HSBP M10 0.04> Fixed Processor SCSI-2 device
pass4: 3.300MB/s transfers
pass4 at ahc0 bus 0 target 6 lun 0
pass4: <ESG-SHV SCA HSBP M10 0.04> Fixed Processor SCSI-2 device
pass4: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V__9_SCA 0230> Fixed Direct Access SCSI-3 device
da0: Serial Number 149023653592
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 8755MB (17930694 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS_V__9_SCA 0230> Fixed Direct Access SCSI-3 device
da1: Serial Number 149023653551
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 8755MB (17930694 512 byte sectors: 255H 63S/T 1116C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
da2: Serial Number 143028352051
da2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da2: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
da3: Serial Number 143028352478
da3: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da3: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C)
Mounting root from ufs:/dev/da0s1a
Fatal trap 12: page fault while in kernel mode
mp_lock = 00000002; cpuid = 0; lapic.id = 01000000
fault virtual address = 0xbff6b170
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc021ba45
stack pointer = 0x10:0xc02ffccc
frame pointer = 0x10:0xc02ffce8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam <- SMP: XXX
trap number = 12
panic: page fault
mp_lock = 00000002; cpuid = 0; lapic.id = 01000000
boot() called on cpu#0
Fatal trap 12: page fault while in kernel mode
mp_lock = 00000005; cpuid = 0; lapic.id = 01000000
fault virtual address = 0x3a
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc01eb0f3
stack pointer = 0x10:0xc02ff8d4
frame pointer = 0x10:0xc02ff974
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam <- SMP: XXX
trap number = 12
panic: page fault
mp_lock = 00000005; cpuid = 0; lapic.id = 01000000
boot() called on cpu#0
Fatal trap 12: page fault while in kernel mode
mp_lock = 00000008; cpuid = 0; lapic.id = 01000000
fault virtual address = 0x3a
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc01eb0f3
stack pointer = 0x10:0xc02ff4dc
frame pointer = 0x10:0xc02ff57c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam <- SMP: XXX
trap number = 12
panic: page fault
mp_lock = 00000008; cpuid = 0; lapic.id = 01000000
boot() called on cpu#0
Fatal trap 12: page fault while in kernel mode
mp_lock = 0000000b; cpuid = 0; lapic.id = 01000000
fault virtual address = 0x3a
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc01eb0f3
stack pointer = 0x10:0xc02ff0e4
frame pointer = 0x10:0xc02ff184
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam <- SMP: XXX
trap number = 12
pani (output from serial console ends)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0103221236410.67645-100000>