Date: Fri, 15 Jun 2001 10:44:16 +0200 From: Erik Nygren <erik@swip.net> To: stable@freebsd.org Subject: Linux-support Message-ID: <3B29CAE0.2070203@swip.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
After my latest make world I have trouble with /compat/linux/dev/hda
My computer says device is not configured. Is this something I have
missed out or is it something that have gone broken in the Linux-support?
Oh, this breaks VMwares support for existing partitions of course.
(Which is my original problem).
/usr/src cvsup:ed about 9 AM (GMT+2) 14. of June, I think.
Appending output from dmesg...
regards
Erik Nygren
[-- Attachment #2 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #6: Fri Jun 15 08:53:55 CEST 2001
root@teddy.swip.net:/usr/src/sys/compile/TEDDY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (798.86-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267386880 (261120K bytes)
avail memory = 257138688 (251112K bytes)
Preloaded elf kernel "kernel" at 0xc032e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 10
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0x1000-0x103f mem 0x40000000-0x40000fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:31:af:99
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x2460-0x246f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2440-0x245f irq 10 at device 31.4 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0x8
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0x10
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 9541MB <ST310215A> [19386/16/63] at ata0-master UDMA100
acd0: CDROM <Compaq CRD-8481B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
fxp0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0x40400000-0x4047ffff,0x44000000-0x47ffffff irq 10 at device 2.0 on pci0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B29CAE0.2070203>