Date: Wed, 6 Sep 2000 15:35:54 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: alpha@FreeBSD.ORG Subject: FWIW, more crosschecks on latest checkin Message-ID: <Pine.BSF.4.21.0009061533360.61392-100000@beppo.feral.com> In-Reply-To: <Pine.BSF.4.21.0009062103440.530-100000@salmon.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
my Alphastation 500, which, ahem, is quite close to my PC164....
stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 7 6
done
Uptime: 19d20h22m44s
Rebooting...
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc00005c7650
CPU 0 booting
(boot dka0.0.0.9.0 -flags a)
block 0 of dka0.0.0.9.0 is a valid boot block
reading 15 blocks from dka0.0.0.9.0
bootstrap code read in
base = 13c000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 12e000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Loading /boot/loader
Console: SRM firmware console
VMS PAL rev: 0x1000000010112
OSF PAL rev: 0x1000000020115
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 0.3
(mjacob@mathom.nas.nasa.gov, Thu Aug 10 07:01:30 PDT 2000)
Memory: 262144 k
Loading /boot/defaults/loader.conf
kernel data=0x3bea10+0x392f2 syms=[0x8+0x4b6600x8+0x37eba]
modules/ispfw.ko text=0x4f5c8 data=0x268 syms=[0x8+0x630+0x8+0x2ee]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds... Booting [kernel]...
Entering kernel at 0xfffffc000032e280...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Setting fdc 0 at to isa (string)
Setting fdc 0 port to 1008 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 drq to 2 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting vga 0 at to isa (string)
Setting sc 0 at to isa (string)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting sio 0 at to isa (string)
Setting sio 0 port to 1016 (int)
Setting sio 0 irq to 4 (int)
Setting sio 1 at to isa (string)
Setting sio 1 port to 760 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 flags to 80 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #0: Thu Aug 17 18:49:46 PDT 2000
mjacob@mathom.nas.nasa.gov:/usr/src/sys/compile/GENERIC
AlphaStation 500 or 600 (KN20AA)
Digital AlphaStation 500/500, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020115
real memory = 266182656 (259944K bytes)
Physical memory chunk(s):
0x007fc000 - 0x0ff0dfff, 259072000 bytes (31625 pages)
avail memory = 251666432 (245768K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007e0000.
Preloaded elf module "ispfw.ko" at 0xfffffc00007e00c0.
mem: <memory & I/O>
nulldev: <null device, zero device>
random: <entropy source>
Creating DISK md0
md0: Malloc disk
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
found-> vendor=0x1011, dev=0x0002, revid=0x26
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=13
map[10]: type 4, range 32, base 00010180, size 7, enabled
map[14]: type 1, range 32, base 82051080, size 7, enabled
found-> vendor=0x1011, dev=0x0009, revid=0x20
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[10]: type 4, range 32, base 00010100, size 7, enabled
map[14]: type 1, range 32, base 82051000, size 7, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82050000, size 12, enabled
found-> vendor=0x8086, dev=0x0482, revid=0x15
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
de0: <Digital 21040 Ethernet> port 0x10180-0x101ff mem 0x82051080-0x820510ff irq 13 at device 6.0 on pci0
de0: interrupting at CIA irq 13
de0: DEC 21040 [10Mb/s] pass 2.6
de0: address 00:00:f8:25:34:a6
bpf: de0 attached
de1: <Digital 21140A Fast Ethernet> port 0x10100-0x1017f mem 0x82051000-0x8205107f irq 16 at device 8.0 on pci0
de1: interrupting at CIA irq 16
de1: 21140A [10-100Mb/s] pass 2.0
de1: address 00:c0:f0:16:28:1f
bpf: de1 attached
Qlogic ISP Driver, FreeBSD Version 5.3, Core Version 2.0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82050000-0x82050fff irq 12 at device 9.0 on pci0
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 12
isp0: Board Revision 1020A, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 5.1.1
isab0: <Intel 82375EB PCI-EISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> failed to probe on isa0
sc0: no video adapter is found.
sc0: <System console> failed to probe on isa0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 500001450 Hz (firmware 500000000 Hz)
sio0: irq maps: 0x40 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 500001450 Hz
bpf: ppp0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
Waiting 15 seconds for SCSI devices to settle
de1: enabling 10baseT port
de0: autosense failed: cable problem?
isp0: 0.4 get user period 0x19 offset 0xc flags 0xfd00
isp0: 0.4 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.4 set current period 0x19 offset 0xc flags 0xd500
isp0: 0.0 get user period 0x19 offset 0xc flags 0xfd00
isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.0 set current period 0x19 offset 0xc flags 0xfd00
Creating DISK cd0
Creating DISK da0
pass0 at isp0 bus 0 target 0 lun 0
pass0: <DEC RZ1CB-BS (C) DEC 0658> Fixed Direct Access SCSI-2 device
pass0: Serial Number JDF492370Q9UPJ
isp0: 0.0 get current period 0x19 offset 0xc flags 0xfd00
pass0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled
pass1 at isp0 bus 0 target 4 lun 0
pass1: <DEC RRD46 (C) DEC 0557> Removable CD-ROM SCSI-2 device
isp0: 0.4 get current period 0x19 offset 0x8 flags 0xd500
pass1: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at isp0 bus 0 target 0 lun 0
da0: <DEC RZ1CB-BS (C) DEC 0658> Fixed Direct Access SCSI-2 device
da0: Serial Number JDF492370Q9UPJ
isp0: 0.0 get current period 0x19 offset 0xc flags 0xfd00
da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
(cd0:isp0:0:4:0): got CAM status 0x50
(cd0:isp0:0:4:0): fatal error, failed to attach to device
(cd0:isp0:0:4:0): lost device
(cd0:isp0:0:4:0): removing device entry
Mounting root from ufs:/dev/da0a
da0: invalid primary partition table: no magic
start_init: trying /sbin/init
swapon: adding /dev/da0b as swap device
Automatic boot in progress...
/dev/da0a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0a: clean, 1445673 free (45481 frags, 175024 blocks, 1.2% fragmentation)
Doing initial network setup: hostname domain.
de1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 129.99.50.36 netmask 0xffffff00 broadcast 129.99.50.255
inet6 fe80::2c0:f0ff:fe16:281f%de1 prefixlen 64 tentative scopeid 0x2
ether 00:c0:f0:16:28:1f
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 129.99.50.254
Additional routing options: tcp extensions=NO TCP keepalive=YES.
routing daemons:.
mount: /home/ncvs: No such file or directory
Mounting NFS file systems.
additional daemons: syslogdSep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
Sep 6 15:24:58 mathom /kernel: kbdc: TEST_AUX_PORT status:0000
Sep 6 15:24:59 mathom /kernel: kbdc: RESET_AUX return code:00fe
Sep 6 15:24:59 mathom last message repeated 2 times
Sep 6 15:24:59 mathom /kernel: kbdc: DIAGNOSE status:0055
Sep 6 15:24:59 mathom /kernel: kbdc: TEST_KBD_PORT status:0000
.
Doing additional network setup: ntpdate ntpd portmap ypbind.
Starting final network daemons:.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
starting standard daemons: inetd cron.
Initial rc.alpha initialization:.
rc.alpha configuring syscons:.
Local package initialization: Networker sshd.
Additional TCP options:.
Wed Sep 6 15:25:50 PDT 2000
FreeBSD/alpha (mathom.nas.nasa.gov) (console)
login:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0009061533360.61392-100000>