Date: Sun, 6 Oct 2002 15:10:45 -0400 (EDT) From: Andrew Gallatin <gallatin@cs.duke.edu> To: freebsd-current@freebsd.org Subject: ACPI s3 suspend/resume and video Message-ID: <15776.35509.296282.592593@grasshopper.cs.duke.edu>
next in thread | raw e-mail | index | archive | help
I've just gotten a new desktop (P4, Intel D845EBG2 motherboard,
ATI Rage 128 Pro AGP 4x video), and I'm thrilled that I can
suspend it to ACPI s3. That's awesome!
However, when I resume I have no video. Is this a known bug?
Is there anything I can do about it?
Thanks for your help,
Drew
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Oct 6 14:03:54 EDT 2002
gallatin@whisper:/usr/src/sys/i386/compile/WHISPER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc051b000.
Preloaded elf module "/boot/kernel/rp.ko" at 0xc051b0a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc051b150.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2533435400 Hz
CPU: Pentium 4 (2533.44-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536084480 (523520K bytes)
avail memory = 514764800 (502700K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D845EBG2> on motherboard
Using $PIR table, 10 entries at 0xc00f4670
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 9 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xff9ff000-0xff9fffff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:07:e9:a8:36:f2
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rp0: <RocketPort PCI> port 0xd880-0xd8bf irq 11 at device 13.0 on pci2
RocketPort0 (Version 3.02) 8 ports.
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel 82801DB (ICH4)> port 0xe080-0xe0bf,0xe400-0xe4ff mem 0xffaff400-0xffaff4ff,0xffaff800-0xffaff9ff irq 11 at device 31.5 on pci0
acpi_button0: <Sleep Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW CRX195E1> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ad0s1: raw partition size != slice size
ad0s1: start 63, end 8385929, size 8385867
ad0s1c: start 63, end 156296384, size 156296322
ad0s1: truncating raw partition
ad0s1: rejecting partition in BSD label: it isn't entirely within the slice
ad0s1: start 63, end 8385929, size 8385867
ad0s1f: start 4194367, end 156296384, size 152102018
pid 565 (XFree86), uid 0: exited on signal 6
pid 631 (XFree86), uid 0: exited on signal 6
Drew
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15776.35509.296282.592593>