Date: Fri, 4 Apr 2014 21:50:03 GMT From: Ian Allison <IFAllison@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/188270: mpt unable to communicate with LSI7202XP Fibrechannel Message-ID: <201404042150.s34Lo3Qr003252@cgiserv.freebsd.org> Resent-Message-ID: <201404042200.s34M00wB073799@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 188270
>Category: kern
>Synopsis: mpt unable to communicate with LSI7202XP Fibrechannel
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Apr 04 22:00:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Ian Allison
>Release: 10.0
>Organization:
UBC
>Environment:
FreeBSD pauli 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 08:49:04 UTC 2014 root@snap.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC64 powerpc
This is a fresh install from the 10.0 CD image
>Description:
I'm trying to connect to an external storage shelf over fibre channel. My system is a xserve g5 and the shelf is an xserve raid. The HBA in the xserve is a PCI-X card from LSILogic, it is listed as LSI7202XP PCI-X HBA. From mpt(4) I thought this would work, but mptutil returns garbage whenever I try to configure the shelf.
Here are the relevant lines from dmesg
mpt0: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> port 0x400-0x4ff mem 0x90030000-0x9003ffff,0x90020000-0x9002ffff irq 181 at device 3.0 on pci2
mpt0: MPI Version=1.3.2.0
mpt1: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> mem 0x90010000-0x9001ffff,0x90000000-0x9000ffff irq 181 at device 3.1 on pci2
mpt1: MPI Version=1.3.2.0
And here is the output of pciconf -lv
mpt0@pci1:6:3:0: class=0x0c0400 card=0x10d01000 chip=0x06261000 rev=0x81 hdr=0x00
vendor = 'LSI Logic / Symbios Logic'
device = 'FC929X Fibre Channel Adapter'
class = serial bus
subclass = Fibre Channel
mpt1@pci1:6:3:1: class=0x0c0400 card=0x10d01000 chip=0x06261000 rev=0x81 hdr=0x00
vendor = 'LSI Logic / Symbios Logic'
device = 'FC929X Fibre Channel Adapter'
class = serial bus
subclass = Fibre Channel
mptutil gives garbled results, for example the show adapter command
mptutil show adapter
mpt0 Adapter:
Board Name:
Board Assembly:
Chip Name: U?
Chip Revision:
mptutil: mpt_read_ioc_page(2): Status: 0x2200
mptutil: mpt_read_ioc_page(6): Status: 0x2200
mpt0 Adapter:
Board Name:
Board Assembly: ?\H
Chip Name: ?a
Chip Revision: ?#0
mptutil: mpt_read_ioc_page(2): Status: 0x2200
mptutil: mpt_read_ioc_page(6): Status: 0x2200
or show drives
mptutil show drives
mptutil: Reading config page header failed: Status: 0x2200
mptutil: Failed to fetch volume list: Input/output error
mptutil: Failed to get drive list: Input/output error
I have looked at /usr/src/UPDATING but couldn't see anything, and all of my searches turned up nothing relevant.
>How-To-Repeat:
>From 10.0 with GENERIC kernel
mptutil show adapter
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201404042150.s34Lo3Qr003252>