Date: Wed, 13 Jan 1999 00:33:39 +0100 (CET) From: Leif Neland <leif@swimsuit.internet.dk> To: freebsd-current@FreeBSD.ORG Subject: ppp: Do something if connection fails. Message-ID: <Pine.BSF.4.05.9901130027420.25540-100000@arnold.swimsuit.internet.dk>
next in thread | raw e-mail | index | archive | help
Is it possible to do something if the connection fails to get established? When ppp fails, but instead just loops, I either turn the modem off and on, or do a software reset. But I don't want to reset the modem every time I want to dial out, as it would take too long time. When the connection loops, I get this in ppp.log Jan 11 18:11:00 arnold ppp[20952]: tun0: Phase: bundle: Establish Jan 11 18:11:00 arnold ppp[20952]: tun0: Phase: deflink: closed -> opening Jan 11 18:11:00 arnold ppp[20952]: tun0: Phase: deflink: Connected! Jan 11 18:11:00 arnold ppp[20952]: tun0: Phase: deflink: opening -> dial Jan 11 18:11:00 arnold ppp[20952]: tun0: Phase: Phone: 12345678 Jan 11 18:11:00 arnold ppp[20952]: tun0: Chat: deflink: Dial attempt 1 of 1 Jan 11 18:11:00 arnold ppp[20952]: tun0: Chat: Send: ATZ^M Jan 11 18:11:00 arnold ppp[20952]: tun0: Chat: Expect(5): OK Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Received: ATZ^M^M Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Received: OK^M Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Send: ATE1^M Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Expect(5): OK Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Received: ATE1^M^M Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Received: OK^M Jan 11 18:11:01 arnold ppp[20952]: tun0: Chat: Send: AT&K00B40DI12345678^M Jan 11 18:11:02 arnold ppp[20952]: tun0: Chat: Expect(15): CONNECT Jan 11 18:11:02 arnold ppp[20952]: tun0: Chat: Received: AT&K00B40DI12345678^M^M Jan 11 18:11:02 arnold ppp[20952]: tun0: Chat: Received: CONNECT 115200/PPP 64000/NONE^M Jan 11 18:11:02 arnold ppp[20952]: tun0: Phase: deflink: dial -> login Jan 11 18:11:02 arnold ppp[20952]: tun0: Phase: deflink: login -> lcp Jan 11 18:11:02 arnold ppp[20952]: tun0: LCP: FSM: Using "deflink" as a transport Jan 11 18:11:02 arnold ppp[20952]: tun0: LCP: deflink: State change Initial --> Closed Jan 11 18:11:02 arnold ppp[20952]: tun0: Phase: deflink: Entering STOPPED state for 2 seconds Jan 11 18:11:02 arnold ppp[20952]: tun0: LCP: deflink: State change Closed --> Stopped Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: deflink: LayerStart Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(134) state = Stopped Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: ACFCOMP[2] Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: PROTOCOMP[2] Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:04 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: deflink: State change Stopped --> Req-Sent Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: deflink: RecvConfigRej(134) state = Req-Sent Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: PROTOCOMP[2] Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: ACFCOMP[2] Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(135) state = Req-Sent Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:05 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:08 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(135) state = Req-Sent Jan 11 18:11:08 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:08 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:08 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:11 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(135) state = Req-Sent Jan 11 18:11:11 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:11 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:11 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:14 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(135) state = Req-Sent Jan 11 18:11:14 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:14 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:14 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:17 arnold ppp[20952]: tun0: LCP: deflink: SendConfigReq(135) state = Req-Sent Jan 11 18:11:17 arnold ppp[20952]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 11 18:11:17 arnold ppp[20952]: tun0: LCP: MRU[4] 1500 Jan 11 18:11:17 arnold ppp[20952]: tun0: LCP: MAGICNUM[6] 0x6954f108 Jan 11 18:11:20 arnold ppp[20952]: tun0: LCP: deflink: LayerFinish Jan 11 18:11:20 arnold ppp[20952]: tun0: LCP: deflink: State change Req-Sent --> Stopped Jan 11 18:11:20 arnold ppp[20952]: tun0: LCP: deflink: State change Stopped --> Closed Jan 11 18:11:20 arnold ppp[20952]: tun0: LCP: deflink: State change Closed --> Initial Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: deflink: Disconnected! Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: deflink: lcp -> hangup Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: deflink: Connect time: 20 secs: 25 octets in, 272 octets out Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: total 14 bytes/sec, peak 33 bytes/sec on Mon Jan 11 18:11:20 1999 Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: deflink: hangup -> closed Jan 11 18:11:20 arnold ppp[20952]: tun0: Phase: bundle: Dead What's happening? Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9901130027420.25540-100000>