Date: Wed, 09 Apr 1997 15:14:11 -0600 From: rpanula@dacmail.net (Russ Panula) To: "Pat McPartland" <mcp@blast.net> Cc: "Blaine Minazzi" <bminazzi@denverweb.net>, <freebsd-isp@freebsd.org> Subject: Re: smc9332 and freeBSD 2.1.5 problems Message-ID: <334efd2a.4487197@mail.digitaladvantage.net> In-Reply-To: <199704091945.PAA16492@fireball.blast.net> References: <199704091945.PAA16492@fireball.blast.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Pat, On Wed, 9 Apr 1997 15:42:37 -0400, "Pat McPartland" <mcp@blast.net> wrote: >These cards are PCI cards. How would I set the kernel to find these cards? > How does the kernel handle PCI? > Within your kernel config file you should be able to specify: controller pci0 device de0 device de1 And the cards should be detected. Some bios setups will let you assign IRQ's manually to the cards. Make sure you are using the correct ethernet port on the card. Try adding -link2 or link2 to your ifconfig statements. >---------- >> From: Blaine Minazzi <bminazzi@denverweb.net> >> To: Pat McPartland <mcp@blast.net> >> Subject: Re: smc9332 and freeBSD 2.1.5 problems >> Date: Wednesday, April 09, 1997 12:56 PM >> >> Pat McPartland wrote: >> > >> > Hello, >> > I am trying to get smc9332 10/100 cards to work in FreeBSD. They >detect as >> > de0 and de1. >> > >> > Well, first, I can't even get one to work. I set up the card as such >in >> > sysconfig: >> > network_interfaces="de0 lo0" >> > ifconfig_de0="inet xxx.xxx.xxx.xxx netmask 255.255.255.0" >> > ifconfig_lo0="inet localhost" >> > >> > and de0 is enabled (i'm using GENERIC kernel at the moment). >> > No error, it just can't find anything on the network. Note this worked >> > with 3com Etherlink3 (ep0). >> > >> > And the cards work in my win95 machine. >> > >> > I am going to trying to setup two of these cards in a dual-homed >machine. >> > >> > Fun,fun,fun. >> > >> > Thanks, >> > >> > Pat >> > >> > Patrick McPartland >> > mcp@blast.net >> >> Hate to ask a silly question, but are the cards set up at the interupt >> and address that the kernel is compiled with? >> >> I would suggest that you either: >> >> a: Look at the config of the kernel and check the address and IRQ the >> card is supposed to work at, and set the cards there. >> >> b: recompile the kernel with the parameters you need. >> >> I would personally go with option b... >> >> Oh yeah... if these are software set cards, did WIN95 "HELP" you >> by resetting the cards to what IT wanted? I have seen it happen with >> other cards. WinBLows changes settings on them without even a "by your >> leave". >> >> I would also get ONE card working FIRST. then go to dual homed. >> >> Good Luck >> >> Blaine >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?334efd2a.4487197>