Date: 16 Apr 2002 08:22:13 -0600 From: Srinivasan Rajagopal Iyengar <sanatanadharma@attbi.com> To: freebsd-questions@FreeBSD.ORG Subject: cdrom mount problems with custom kernel Message-ID: <1018966934.300.10.camel@Bhadrachalam.attbi.com>
next in thread | raw e-mail | index | archive | help
Hi, I am running 4.5-Stable with a custom built kernel. I get the following message when I try to mount the cdrom. Bhadrachalam# mount /cdrom cd9660: /dev/acd0c: Device not configured I have tried other mount commands, but it seems that for some reason the kernel does not see the cdrom device "/dev/acd0c". I am able to mount the cdrom if I boot to the generic kernel (but it has no support for sound). However, if I just compile the generic kernel without any changes, to a new kernel name, it again does not see the cdrom. I suspect there is some problem in the kernel compilation process. If anyone has seen this problem or knows a work-around, I would appreciate the help. Here is the output of dmesg and below is my custom kernel file. Many thanks, Srini. _________________________________________________________________________ ad0: 19541MB <Maxtor 5T020H2> [39704/16/63] at ata0-master UDMA100 ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-slave UDMA100 acd0: CD-RW <_NEC NR-7700A> at ata1-master PIO4 Waiting 5 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a ---------------------------------------------------------------------------- machine i386 cpu I686_CPU ident BHADRACHALAM maxusers 32 # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options EXT2FS #Linux EXT2 Filesystem options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options USER_LDT # For xmovie player # options PNPBIOS # For builtin Motherboard sound devices device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device sa # Sequential Access (tape etc) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device rl # RealTek 8129/8139 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # # For PnP/PCI sound cards device pcm device pcm0 at isa? irq 10 drq 1 flags 0x0 ____________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1018966934.300.10.camel>