Date: Tue, 10 Jun 2008 16:33:47 +0200 From: "DA Forsyth" <iwrtech@iwr.ru.ac.za> To: freebsd-questions@freebsd.org Subject: xRAID disks.... Message-ID: <484EACEB.7169.43FE1258@iwrtech.iwr.ru.ac.za>
next in thread | raw e-mail | index | archive | help
Hiya
I've had this for a while now and have done many searches for info
but have not yet come up with the right question, hence have not got
the answer.
My main server has an Adaptec IDE raid card. A couple of years ago I
took disks that had been a mirror pair on that card out of the server
and put them into my test server, not as a raid pair since the test
server has no raid hardware.
During boot I see this
ad0: 19092MB <WDC WD200EB-00CPF0 06.04G06> at ata0-master UDMA66
ad1: 76319MB <WDC WD800JB-00ETA0 77.07W77> at ata0-slave UDMA66
ad2: 76319MB <WDC WD800JB-00ETA0 77.07W77> at ata1-master UDMA66
ad3: 19092MB <WDC WD200EB-00CPF0 06.04G06> at ata1-slave UDMA66
ar0: 76319MB <Adaptec HostRAID RAID1> status: BROKEN
ar0: disk0 DOWN no device found for this subdisk
ar0: disk1 DOWN no device found for this subdisk
The pair of ex-RAID disks are ad1 and ad2 and obviously are no longer
a raid pair, yet 'something' is telling the ar() driver to try and
pair them and failing because there is no raid hardware in that box.
Now I am reconfiguring that machine a bit and would like to fix this,
both on these existing drives and on the 320MB drive I have just
removed from a RAID1 pair and will be putting into the box instead of
ad3 (the other 320GB from the pair is in a USB enclosure for other
purposes and has not shown any signs of knowing it was in a raid
pair)
I suspect the raidinfo is stored on the disk somewhere and a suitable
'dd' command can erase it. but where and how?
thanks for your help
--
DA Fo rsyth Network Supervisor
Principal Technical Officer -- Institute for Water Research
http://www.ru.ac.za/institutes/iwr/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?484EACEB.7169.43FE1258>