Date: Tue, 04 Feb 2003 20:58:24 +0200 From: Petri Helenius <pete@he.iki.fi> To: current@freebsd.org, scottl@freebsd.org Subject: raidframe issues Message-ID: <3E400D50.8010401@he.iki.fi>
next in thread | raw e-mail | index | archive | help
I'm trying to create a raid set but after hitting the end of initializing a raid5 stripe the following is displayed on the console: raid0: node (Rod) returned fail, rolling backward raid0: IO Error. Marking /dev/da2s1e as failed. raid0: node (Rod) returned fail, rolling backward raid0: IO Error. Marking /dev/da1s1e as failed. raid0: node (Rod) returned fail, rolling backward Unable to verify parity: can't read the stripe Could not verify parity raid0: Error re-writing parity! Multiple disks failed in a single group! Aborting I/O operation. Multiple disks failed in a single group! Aborting I/O operation. Multiple disks failed in a single group! Aborting I/O operation. [Failed to create a DAG] panic: raidframe error at line 459 file /usr/src/sys/dev/raidframe/rf_states.c cpuid = 0; lapic.id = 00000000 boot() called on cpu#0 syncing disks, buffers remaining... panic: bdwrite: buffer is not busy cpuid = 0; lapic.id = 00000000 boot() called on cpu#0 Uptime: 38m47s Shutting down raid0 Terminate ACPI Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... cpu_reset called on cpu#0 cpu_reset: Stopping other CPUs dmesg gives the following as disks: da0 at ahd0 bus 0 target 0 lun 0 da0: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da1 at ahd0 bus 0 target 1 lun 0 da1: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da2 at ahd0 bus 0 target 2 lun 0 da2: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da3 at ahd0 bus 0 target 3 lun 0 da3: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) > cat /etc/raid0.conf START array 1 3 0 START disks /dev/da1s1e /dev/da2s1e /dev/da3s1e START layout 16 1 1 5 START queue fifo 100 Pete To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E400D50.8010401>