Date: Fri, 03 Feb 2012 17:31:50 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 Message-ID: <4F2C0BF6.8050701@gmail.com> In-Reply-To: <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2E@inbmail01.lsi.com> References: <20120202191105.GA55719@nargothrond.kdm.org> <4F2BF270.70303@gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2A@inbmail01.lsi.com> <4F2BF93F.4060407@gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2E@inbmail01.lsi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Desai, Kashyap schreef: > Try attached patch.! (This patch is not taken against upstream code, so you may see some hunk fail.) > > ~ Kashyap > >> -----Original Message----- >> From: Johan Hendriks [mailto:joh.hendriks@gmail.com] >> Sent: Friday, February 03, 2012 8:42 PM >> To: Desai, Kashyap >> Cc: freebsd-stable >> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 >> >> Desai, Kashyap schreef: >>> Hi Johan, >>> >>> I have already figure out this issue in our lab. >>> >>> I also have fix for this issue. (Just don't want to create regression, >> that is why I have not posted outside) >>> Since you have seen similar issue, It is worth to try my patch. >>> >>> My machine is not getting IP right now. I will send you patch once my >> machine is in network ? >>> ~ Kashyap >>> >>> >>>> -----Original Message----- >>>> From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd- >>>> stable@freebsd.org] On Behalf Of Johan Hendriks >>>> Sent: Friday, February 03, 2012 8:13 PM >>>> To: Kenneth D. Merry >>>> Cc: freebsd-stable >>>> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 >>>> >>>> Kenneth D. Merry schreef: >>>>> Hi folks, >>>>> >>>>> The LSI-supported version of the mps(4) driver that supports their >> 6Gb >>>> SAS >>>>> HBAs as well as WarpDrive controllers, is now in stable/9 and >>>> stable/8. >>>>> Please test it out and let me and Kashyap (CCed) know if you run >> into >>>>> any problems. >>>>> >>>>> In addition to supporting WarpDrive, the driver also supports >>>> Integrated >>>>> RAID. >>>>> >>>>> Thanks to LSI for doing the work on this driver! >>>>> >>>>> Note that the CAM infrastructure changes that went into FreeBSD/head >>>> along >>>>> with this driver have not gone into either stable/9 or stable/8. >> Only >>>> the >>>>> driver itself has been merged. >>>>> >>>>> The CAM infrastructure changes depend on some other da(4) driver >>>> changes >>>>> that will need to get merged before they can go back. If that merge >>>>> happens, it will probably only be into stable/9. >>>>> >>>>> A couple of notes about issues with this driver: >>>>> >>>>> - Unlike the previous mps(4) driver, it probes sequentially. If >> you >>>> have >>>>> a lot of drives in your system, it will take a while to probe >> them >>>> all. >>>>> - You may see warning messages like this: >>>>> >>>>> _mapping_add_new_device: failed to add the device with handle 0x0019 >>>> to persiste >>>>> nt table because there is no free space available >>>>> _mapping_add_new_device: failed to add the device with handle 0x001a >>>> to persiste >>>>> nt table because there is no free space available >>>>> >>>>> - The driver is not endian safe. (It assumes a little endian >>>> machine.) >>>>> This is not new, the previous version of the driver had the >> same >>>> issue. >>>>> The LSI folks know about these issues. The driver has passed their >>>> testing >>>>> process. >>>>> >>>>> Many thanks to LSI for going through the effort to support FreeBSD. >>>>> >>>>> Ken >>>> Hello Ken. >>>> >>>> Just updated our 16 bay server. did a csup today. >>>> did try some commands, it looked like the drives got husseled. >>>> >>>> But after giving the command camcontrol rescan all it does not give >> back >>>> the prompt. >>>> Also top shows me the following. >>>> 1589 root 1 20 0 16384K 1376K cbwait 3 0:00 0.00% >>>> camcontrol >>>> >>>> # on another console things works >>>> filer01# camcontrol devlist >>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 8 lun 0 >> (pass0,da0) >>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 9 lun 0 >> (pass1,da1) >>>> <ATA WDC WD2500AAJS-6 2E25> at scbus0 target 10 lun 0 >> (pass2,da2) >>>> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 11 lun 0 >> (pass3,da3) >>>> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 12 lun 0 >> (pass4,da4) >>>> <ATA ST3250620NS BJH> at scbus0 target 13 lun 0 >> (pass5,da5) >>>> <LSI CORP SAS2X28 0717> at scbus0 target 16 lun 0 >>>> (probe16,ses0,pass6) >>>> <ATA Maxtor 6L080M0 1G10> at scbus0 target 17 lun 0 >> (pass7,da6) >>>> <ATA Maxtor 6L080M0 1G10> at scbus0 target 18 lun 0 >> (pass8,da7) >>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 19 lun 0 >> (pass9,da8) >>>> <ATA WDC WD800JD-60LU 1D07> at scbus0 target 20 lun 0 >>>> (pass10,da9) >>>> <ATA GB0250EAFJF HPG6> at scbus0 target 21 lun 0 >>>> (pass11,da10) >>>> <ATA ST3250620NS 3BJP> at scbus0 target 22 lun 0 >>>> (pass12,da11) >>>> <ATA ST3250620NS 3BJP> at scbus0 target 23 lun 0 >>>> (pass13,da12) >>>> <ATA ST3250620NS 3BJP> at scbus0 target 24 lun 0 >>>> (pass14,da13) >>>> <ATA ST3250310AS B> at scbus0 target 27 lun 0 >>>> (pass15,da14) >>>> <ATA ST3250620NS 3BJP> at scbus0 target 28 lun 0 >>>> (pass16,da15) >>>> <ST3808110AS 3.AJJ> at scbus1 target 0 lun 0 >>>> (ada0,pass17) >>>> <TSSTcorp CDDVDW SN-208BB SB00> at scbus3 target 0 lun 0 >> (pass18,cd0) >>>> The controller is a LSI 9211-8i with IT firmware. >>>> >>>> here is the dmesg >>>> Copyright (c) 1992-2012 The FreeBSD Project. >>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >> 1994 >>>> The Regents of the University of California. All rights >>>> reserved. >>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>> FreeBSD 9.0-STABLE #0: Fri Feb 3 10:27:18 CET 2012 >>>> root@filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL amd64 >>>> CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-class CPU) >>>> Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a >>>> Stepping = 7 >>>> >>>> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE >>>> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >>>> >>>> >> Features2=0x15bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS >>>> SE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX> >>>> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> >>>> AMD Features2=0x1<LAHF> >>>> TSC: P-state invariant, performance statistics >>>> real memory = 17179869184 (16384 MB) >>>> avail memory = 16493441024 (15729 MB) >>>> Event timer "LAPIC" quality 600 >>>> ACPI APIC Table:<SUPERM SMCI--MB> >>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>>> FreeBSD/SMP: 1 package(s) x 4 core(s) >>>> cpu0 (BSP): APIC ID: 0 >>>> cpu1 (AP): APIC ID: 2 >>>> cpu2 (AP): APIC ID: 4 >>>> cpu3 (AP): APIC ID: 6 >>>> ioapic0<Version 2.0> irqs 0-23 on motherboard >>>> kbd1 at kbdmux0 >>>> acpi0:<SUPERM SMCI--MB> on motherboard >>>> acpi0: Power Button (fixed) >>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >>>> acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >>>> cpu0:<ACPI CPU> on acpi0 >>>> cpu1:<ACPI CPU> on acpi0 >>>> cpu2:<ACPI CPU> on acpi0 >>>> cpu3:<ACPI CPU> on acpi0 >>>> pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >>>> pci0:<ACPI PCI bus> on pcib0 >>>> pcib1:<ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 >>>> pci1:<ACPI PCI bus> on pcib1 >>>> mps0:<LSI SAS2008> port 0xe000-0xe0ff mem 0xfb600000-0xfb603fff irq >> 19 >>>> at device 0.0 on pci1 >>>> mps0: Firmware: 11.00.00.00, Driver: 11.255.03.00-fbsd >>>> mps0: IOCCapabilities: >>>> >> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDis >>>> c> >>>> em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0xf020-0xf03f >> mem >>>> 0xfb800000-0xfb81ffff,0xfb824000-0xfb824fff irq 20 at device 25.0 on >>>> pci0 >>>> em0: Using an MSI interrupt >>>> em0: Ethernet address: 00:25:90:57:20:bd >>>> ehci0:<EHCI (generic) USB 2.0 controller> mem 0xfb823000-0xfb8233ff >> irq >>>> 16 at device 26.0 on pci0 >>>> usbus0: EHCI version 1.0 >>>> usbus0:<EHCI (generic) USB 2.0 controller> on ehci0 >>>> pcib2:<ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >>>> pci2:<ACPI PCI bus> on pcib2 >>>> pcib3:<ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 >>>> pci3:<ACPI PCI bus> on pcib3 >>>> em1:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0xd000-0xd01f >> mem >>>> 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 16 at device 0.0 on >> pci3 >>>> em1: Using MSIX interrupts with 3 vectors >>>> em1: Ethernet address: 00:25:90:57:20:bc >>>> ehci1:<EHCI (generic) USB 2.0 controller> mem 0xfb822000-0xfb8223ff >> irq >>>> 23 at device 29.0 on pci0 >>>> usbus1: EHCI version 1.0 >>>> usbus1:<EHCI (generic) USB 2.0 controller> on ehci1 >>>> pcib4:<ACPI PCI-PCI bridge> at device 30.0 on pci0 >>>> pci4:<ACPI PCI bus> on pcib4 >>>> vgapci0:<VGA-compatible display> mem >>>> 0xf9000000-0xf9ffffff,0xfb000000-0xfb003fff,0xfa800000-0xfaffffff irq >> 23 >>>> at device 3.0 on pci4 >>>> isab0:<PCI-ISA bridge> at device 31.0 on pci0 >>>> isa0:<ISA bus> on isab0 >>>> ahci0:<Intel Cougar Point AHCI SATA controller> port >>>> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f >>>> mem 0xfb821000-0xfb8217ff irq 19 at device 31.2 on pci0 >>>> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported >>>> ahcich0:<AHCI channel> at channel 0 on ahci0 >>>> ahcich1:<AHCI channel> at channel 1 on ahci0 >>>> ahcich2:<AHCI channel> at channel 2 on ahci0 >>>> ahcich3:<AHCI channel> at channel 3 on ahci0 >>>> ahcich4:<AHCI channel> at channel 4 on ahci0 >>>> ahcich5:<AHCI channel> at channel 5 on ahci0 >>>> pci0:<serial bus, SMBus> at device 31.3 (no driver attached) >>>> acpi_button0:<Power Button> on acpi0 >>>> hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >>>> ahcich0:<AHCI channel> at channel 0 on ahci0 >>>> ahcich1:<AHCI channel> at channel 1 on ahci0 >>>> ahcich2:<AHCI channel> at channel 2 on ahci0 >>>> ahcich3:<AHCI channel> at channel 3 on ahci0 >>>> ahcich4:<AHCI channel> at channel 4 on ahci0 >>>> ahcich5:<AHCI channel> at channel 5 on ahci0 >>>> pci0:<serial bus, SMBus> at device 31.3 (no driver attached) >>>> acpi_button0:<Power Button> on acpi0 >>>> hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >>>> Timecounter "HPET" frequency 14318180 Hz quality 950 >>>> Event timer "HPET" frequency 14318180 Hz quality 550 >>>> Event timer "HPET1" frequency 14318180 Hz quality 440 >>>> Event timer "HPET2" frequency 14318180 Hz quality 440 >>>> Event timer "HPET3" frequency 14318180 Hz quality 440 >>>> Event timer "HPET4" frequency 14318180 Hz quality 440 >>>> attimer0:<AT timer> port 0x40-0x43 irq 0 on acpi0 >>>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>>> Event timer "i8254" frequency 1193182 Hz quality 100 >>>> atrtc0:<AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >>>> Event timer "RTC" frequency 32768 Hz quality 0 >>>> atkbdc0:<Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >>>> atkbd0:<AT Keyboard> irq 1 on atkbdc0 >>>> kbd0 at atkbd0 >>>> atkbd0: [GIANT-LOCKED] >>>> uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on >> acpi0 >>>> uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >>>> uart2:<16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 >>>> orm0:<ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on >> isa0 >>>> sc0:<System console> at flags 0x100 on isa0 >>>> sc0: VGA<16 virtual consoles, flags=0x300> >>>> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>>> isa0 >>>> ppc0: cannot reserve I/O port range >>>> est0:<Enhanced SpeedStep Frequency Control> on cpu0 >>>> p4tcc0:<CPU Frequency Thermal Control> on cpu0 >>>> est1:<Enhanced SpeedStep Frequency Control> on cpu1 >>>> p4tcc1:<CPU Frequency Thermal Control> on cpu1 >>>> est2:<Enhanced SpeedStep Frequency Control> on cpu2 >>>> p4tcc2:<CPU Frequency Thermal Control> on cpu2 >>>> est3:<Enhanced SpeedStep Frequency Control> on cpu3 >>>> p4tcc3:<CPU Frequency Thermal Control> on cpu3 >>>> ZFS filesystem version 5 >>>> ZFS storage pool version 28 >>>> Timecounters tick every 1.000 msec >>>> usbus0: 480Mbps High Speed USB v2.0 >>>> usbus1: 480Mbps High Speed USB v2.0 >>>> ugen0.1:<Intel> at usbus0 >>>> uhub0:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >> usbus0 >>>> ugen1.1:<Intel> at usbus1 >>>> uhub1:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >> usbus1 >>>> da0 at mps0 bus 0 scbus0 target 8 lun 0 >>>> da0:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >>>> da0: 300.000MB/s transfers >>>> da0: Command Queueing enabled >>>> da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da1 at mps0 bus 0 scbus0 target 9 lun 0 >>>> da1:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >>>> da1: 300.000MB/s transfers >>>> da1: Command Queueing enabled >>>> da1: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da2 at mps0 bus 0 scbus0 target 10 lun 0 >>>> da2:<ATA WDC WD2500AAJS-6 2E25> Fixed Direct Access SCSI-6 device >>>> da2: 300.000MB/s transfers >>>> da2: Command Queueing enabled >>>> da2: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da3 at mps0 bus 0 scbus0 target 11 lun 0 >>>> da3:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device >>>> da3: 300.000MB/s transfers >>>> da3: Command Queueing enabled >>>> da3: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da4 at mps0 bus 0 scbus0 target 12 lun 0 >>>> da4:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device >>>> da4: 300.000MB/s transfers >>>> da4: Command Queueing enabled >>>> da4: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da5 at mps0 bus 0 scbus0 target 13 lun 0 >>>> da5:<ATA ST3250620NS BJH> Fixed Direct Access SCSI-6 device >>>> da5: 150.000MB/s transfers >>>> da5: Command Queueing enabled >>>> da5: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da8 at mps0 bus 0 scbus0 target 19 lun 0 >>>> da8:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >>>> da8: 300.000MB/s transfers >>>> da8: Command Queueing enabled >>>> da8: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da9 at mps0 bus 0 scbus0 target 20 lun 0 >>>> da9:<ATA WDC WD800JD-60LU 1D07> Fixed Direct Access SCSI-6 device >>>> da9: 300.000MB/s transfers >>>> da9: Command Queueing enabled >>>> da9: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da11 at mps0 bus 0 scbus0 target 22 lun 0 >>>> da11:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >>>> da11: 150.000MB/s transfers >>>> da11: Command Queueing enabled >>>> da11: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da12 at mps0 bus 0 scbus0 target 23 lun 0 >>>> da12:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >>>> da12: 150.000MB/s transfers >>>> da12: Command Queueing enabled >>>> da12: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da13 at mps0 bus 0 scbus0 target 24 lun 0 >>>> da13:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >>>> da13: 150.000MB/s transfers >>>> da13: Command Queueing enabled >>>> da13: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da14 at mps0 bus 0 scbus0 target 27 lun 0 >>>> da14:<ATA ST3250310AS B> Fixed Direct Access SCSI-6 device >>>> da14: 300.000MB/s transfers >>>> da14: Command Queueing enabled >>>> da14: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> da15 at mps0 bus 0 scbus0 target 28 lun 0 >>>> da15:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >>>> da15: 150.000MB/s transfers >>>> da15: Command Queueing enabled >>>> da15: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> ses0 at mps0 bus 0 scbus0 target 16 lun 0 >>>> ses0:<LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device >>>> ses0: 600.000MB/s transfers >>>> ses0: Command Queueing enabled >>>> ses0: SCSI-3 SES Device >>>> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 >>>> ada0:<ST3808110AS 3.AJJ> ATA-7 SATA 1.x device >>>> ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) >>>> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) >>>> ada0: Previously was known as ad4 >>>> cd0 at ahcich2 bus 0 scbus3 target 0 lun 0 >>>> SMP: AP CPU #3 Launched! >>>> cd0:<TSSTcorp CDDVDW SN-208BB SB00> Removable CD-ROM SCSI-0 device >>>> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO >>>> 8192bytes) >>>> cd0: Attempt to query device size failed: NOT READY, Medium not >> present >>>> - tray closed >>>> SMP: AP CPU #2 Launched! >>>> SMP: AP CPU #1 Launched! >>>> da6 at mps0 bus 0 scbus0 target 17 lun 0 >>>> da6:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device >>>> da6: 150.000MB/s transfers >>>> da6: Command Queueing enabled >>>> da6: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da7 at mps0 bus 0 scbus0 target 18 lun 0 >>>> da7:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device >>>> da7: 150.000MB/s transfers >>>> da7: Command Queueing enabled >>>> da7: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >>>> da10 at mps0 bus 0 scbus0 target 21 lun 0 >>>> da10:<ATA GB0250EAFJF HPG6> Fixed Direct Access SCSI-6 device >>>> da10: 300.000MB/s transfers >>>> da10: Command Queueing enabled >>>> da10: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >>>> GEOM: da15s1: geometry does not match label (16h,63s != 255h,63s). >>>> uhub1: 2 ports with 2 removable, self powered >>>> uhub0: 2 ports with 2 removable, self powered >>>> Root mount waiting for: usbus1 usbus0 >>>> ugen0.2:<vendor 0x8087> at usbus0 >>>> uhub2:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr >> 2> >>>> on usbus0 >>>> ugen1.2:<vendor 0x8087> at usbus1 >>>> uhub3:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr >> 2> >>>> on usbus1 >>>> Root mount waiting for: usbus1 usbus0 >>>> uhub3: 6 ports with 6 removable, self powered >>>> uhub2: 6 ports with 6 removable, self powered >>>> ugen0.3:<Winbond Electronics Corp> at usbus0 >>>> ums0:<Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, >>>> rev 1.10/0.01, addr 3> on usbus0 >>>> ums0: 3 buttons and [Z] coordinates ID=0 >>>> ukbd0:<Winbond Electronics Corp Hermon USB hidmouse Device, class >> 0/0, >>>> rev 1.10/0.01, addr 3> on usbus0 >>>> kbd2 at ukbd0 >>>> Trying to mount root from ufs:/dev/ada0p2 [rw]... >>>> em0: link state changed to UP >>>> >>>> thanks for your work. >>>> >>>> regards >>>> Johan >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> freebsd-stable@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>>> To unsubscribe, send any mail to "freebsd-stable- >>>> unsubscribe@freebsd.org" >> Ok i will try the patch, no hurry, i am back at the office on monday... >> regards >> Johan Ok i applied the patch, hopefully i did it right. I saw some failed hunk, but forgot to save the .rej files. But the camcontrol rescan all command came back. filer01# camcontrol rescan all Re-scan of bus 0 was successful Re-scan of bus 1 was successful Re-scan of bus 2 was successful Re-scan of bus 3 was successful Re-scan of bus 4 was successful Re-scan of bus 5 was successful Re-scan of bus 6 was successful if you need more info, let me know. regards Johan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F2C0BF6.8050701>