Date: Mon, 10 Dec 2018 03:52:44 -0500 From: Dennis Clarke <dclarke@blastwave.org> To: Mark Millard <marklmi@yahoo.com> Cc: freebsd-ppc@freebsd.org Subject: Re: head -r333897 (usefdt and old PowerMac) questions Message-ID: <41a47de2-76a8-c7d3-35fb-1f958d40af5b@blastwave.org> In-Reply-To: <F5FE65BB-C3BA-4186-A6F4-585FA536B54A@yahoo.com> References: <A2FF3374-0C72-42E0-AB1D-A4BE85EDA551@yahoo.com> <9390ba5a-aa1c-c3be-3c2b-aa2e4e6f0643@freebsd.org> <DF7D1B60-BE49-4EC7-9927-F44CDACD4870@yahoo.com> <749E008B-8E4A-4252-A3C9-D03972B963B7@yahoo.com> <1a922d91-aad5-a88c-0bd9-5f59d6b48b37@blastwave.org> <F5FE65BB-C3BA-4186-A6F4-585FA536B54A@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/10/18 3:33 AM, Mark Millard wrote: > On 2018-Dec-9, at 22:07, Dennis Clarke <dclarke at blastwave.org> wrote: >> On 12/10/18 12:35 AM, Mark Millard via freebsd-ppc wrote: >>> On 2018-May-19, at 21:27, Mark Millard <marklmi26-fbsd at yahoo.com> wrote: >>>> On 2018-May-19, at 9:14 PM, Nathan Whitehorn <nwhitehorn at freebsd.org> wrote: >>>>> You need to wait for one more patch. With that, usefdt=1 is confirmed working on PowerMac 11,2 (like the quad core). You must use vt, not sc, but everything should work out of the box once that patch is in. The only caveat is that bge0 and bge1 may swap numbers. >>>>> -Nathan >>>> >>>> Good to know. Thanks. >>>> >>>> "You must use vt, not sc": does this mean changing to not >>>> include sc in the kernel at all? Or will /boot/loader.conf >>>> having: >>>> >>>> kern.vty=vt >> I feel a bit out of the loop here. I don't know what that "kern.vty=sc" >> is for at all. Perhaps kernel video tty = sugar coated? Just a guess. > > See: https://wiki.freebsd.org/Newcons > Will do. >> >> I can tell you that 341705 requires kern.smp.disabled=1 and usefdt=1 in >> order to boot without a strange freeze or panic. I will check out 341781 >> now and see what new stability has arrived but 341705 requires hand >> holding and small prayers at boot time. > > You are working with builds based on > /usr/src/sys/powerpc/include/vmparam.h having been updated. I am not. > The contexts are not the same and mine is a variation on the official > version, not the official version. I don't know what you mean by 'official'. I merely checkout head and build from there. > I'm not sure when I will next do anything remotely interesting with the > G5. There might not be much to follow for a while. Minor note here is that 341781 boots just fine without any smp issues : dclarke@eris$ uname -aU FreeBSD eris 13.0-CURRENT FreeBSD 13.0-CURRENT r341781 GENERIC powerpc 1200086 dclarke@eris$ uptime 8:46AM up 1 min, 1 user, load averages: 0.38, 0.19, 0.08 dclarke@eris$ sysctl kern.smp.cpus hw.ncpu kern.smp.cpus: 4 hw.ncpu: 4 dclarke@eris$ dmesg ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT r341781 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. VT(ofwfb): resolution 1280x1024 Preloaded elf kernel "/boot/kernel/kernel" at 0xc000000001dec000. Preloaded boot_entropy_cache "/boot/entropy" at 0xc000000001decee8. cpu0: IBM PowerPC 970MP revision 1.1, 2500.33 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory = 8540332032 (8144 MB) available KVA = 34359590911 (32767 MB) Physical memory chunk(s): 0x0000000000025000 - 0x00000000000fffff, 897024 bytes (219 pages) 0x0000000001e5b000 - 0x0000000002bfffff, 14307328 bytes (3493 pages) 0x000000000524e000 - 0x0000000007ffffff, 47915008 bytes (11698 pages) 0x0000000010000000 - 0x000000007f5effff, 1868496896 bytes (456176 pages) 0x0000000100000000 - 0x00000002746b0fff, 6248140800 bytes (1525425 pages) avail memory = 8147922944 (7770 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0: dev=c9a8 (BSP) cpu1: dev=c6c0 cpu2: dev=c3d8 cpu3: dev=c0f0 random: read 3840 bytes from preloaded cache random: unblocking device. arc4random: read 32 bytes from preloaded cache VIMAGE (virtualized network stack) enabled ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 firmware: 't4fw_cfg' version 0: 4644 bytes loaded at 0xc00000000117ebc4 firmware: 't4fw_cfg_uwire' version 0: 21525 bytes loaded at 0xc00000000117fde8 firmware: 't4fw' version 0: 561664 bytes loaded at 0xc0000000011851fd snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 't5fw_cfg' version 0: 6023 bytes loaded at 0xc00000000120e41c firmware: 't5fw_cfg_uwire' version 0: 21935 bytes loaded at 0xc00000000120fba3 firmware: 't5fw' version 0: 649216 bytes loaded at 0xc000000001215152 random: entropy device external interface firmware: 't6fw_cfg' version 0: 6040 bytes loaded at 0xc0000000012b3970 firmware: 't6fw_cfg_uwire' version 0: 21901 bytes loaded at 0xc0000000012b5108 firmware: 't6fw' version 0: 695808 bytes loaded at 0xc0000000012ba695 firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc000000000efa5b8 firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc000000000efff58 firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc000000000f079ce firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc000000000f0e760 firmware: 'isp_2200' version 1: 84566 bytes loaded at 0xc000000000f21342 firmware: 'isp_2300' version 1: 125252 bytes loaded at 0xc000000000f35d98 firmware: 'isp_2322' version 1: 120814 bytes loaded at 0xc000000000f546dc firmware: 'isp_2400' version 1: 204396 bytes loaded at 0xc000000000f75a44 firmware: 'isp_2500' version 1: 218712 bytes loaded at 0xc000000000fb6698 000.000015 [4164] netmap_init netmap: loaded module null: <full device, null device, zero device> openfirm: <Open Firmware control device> nfslock: pseudo-device crypto: <crypto core> tcp_log: tcp_log device kbd0 at kbdmux0 mem: <memory> ofwbus0: <Open Firmware Device Tree> on nexus0 ofwbus0: Malformed reg property on <smu> pcib0: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib0: 86 HT IRQs on device 7.0 pci0: <OFW PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x106b, dev=0x0055, revid=0x00 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x106b, dev=0x0054, revid=0x00 domain=0, bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x106b, dev=0x0053, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib0: Enabling MSI window for HyperTransport slave at pci0:0:1:0 found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <OFW PCI-PCI bridge> at device 9.0 on pci0 pcib1: domain 0 pcib1: secondary bus 3 pcib1: subordinate bus 3 pcib1: memory decode 0xfa400000-0xfa4fffff pci1: <OFW PCI bus> on pcib1 pci1: domain=0, physical bus=3 found-> vendor=0x106b, dev=0x0052, revid=0x00 domain=0, bus=3, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfa400000, size 12, memory disabled pcib1: allocated memory range (0xfa400000-0xfa400fff) for rid 10 of pci0:3:14:0 found-> vendor=0x106b, dev=0x0050, revid=0x00 domain=0, bus=3, slot=13, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x8200, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0xfa404000, size 14, memory disabled pcib1: allocated memory range (0xfa404000-0xfa407fff) for rid 10 of pci0:3:13:0 found-> vendor=0x1166, dev=0x0240, revid=0x00 domain=0, bus=3, slot=12, func=0 class=01-01-8f, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0, size 3, port disabled map[14]: type I/O Port, range 32, base 0, size 2, port disabled map[18]: type I/O Port, range 32, base 0, size 3, port disabled map[1c]: type I/O Port, range 32, base 0, size 2, port disabled map[20]: type I/O Port, range 32, base 0, size 4, port disabled map[24]: type Memory, range 32, base 0xfa402000, size 13, enabled pcib1: allocated memory range (0xfa402000-0xfa403fff) for rid 24 of pci0:3:12:0 pcib2: <OFW PCI-PCI bridge> at device 8.0 on pci0 pcib2: domain 0 pcib2: secondary bus 1 pcib2: subordinate bus 1 pcib2: memory decode 0x80000000-0x800fffff pci2: <OFW PCI bus> on pcib2 pci2: domain=0, physical bus=1 found-> vendor=0x1033, dev=0x00e0, revid=0x04 domain=0, bus=1, slot=11, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80080000, size 8, memory disabled pcib2: allocated memory range (0x80080000-0x800800ff) for rid 10 of pci0:1:11:2 found-> vendor=0x1033, dev=0x0035, revid=0x43 domain=0, bus=1, slot=11, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80081000, size 12, memory disabled pcib2: allocated memory range (0x80081000-0x80081fff) for rid 10 of pci0:1:11:1 found-> vendor=0x1033, dev=0x0035, revid=0x43 domain=0, bus=1, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80082000, size 12, memory disabled pcib2: allocated memory range (0x80082000-0x80082fff) for rid 10 of pci0:1:11:0 found-> vendor=0x106b, dev=0x004f, revid=0x00 domain=0, bus=1, slot=7, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0x80000000, size 19, enabled pcib2: allocated memory range (0x80000000-0x8007ffff) for rid 10 of pci0:1:7:0 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci2 ofw_pci mapdev: start 80000000, len 524288 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 pcib3: <OFW PCI-PCI bridge> at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 2 pcib3: subordinate bus 2 pcib3: memory decode 0xfa000000-0xfa3fffff pci3: <OFW PCI bus> on pcib3 pci3: domain=0, physical bus=2 found-> vendor=0x106b, dev=0x0051, revid=0x00 domain=0, bus=2, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x84a0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0xfa200000, size 21, memory disabled pcib3: allocated memory range (0xfa200000-0xfa3fffff) for rid 10 of pci0:2:15:0 pcib4: <OFW PCI-PCI bridge> at device 6.0 on pci0 pcib4: domain 0 pcib4: secondary bus 9 pcib4: subordinate bus 9 pci4: <OFW PCI bus> on pcib4 pci4: domain=0, physical bus=9 pcib5: <OFW PCI-PCI bridge> at device 5.0 on pci0 pcib5: domain 0 pcib5: secondary bus 8 pcib5: subordinate bus 8 pci5: <OFW PCI bus> on pcib5 pci5: domain=0, physical bus=8 pcib6: <OFW PCI-PCI bridge> at device 4.0 on pci0 pcib6: domain 0 pcib6: secondary bus 7 pcib6: subordinate bus 7 pci6: <OFW PCI bus> on pcib6 pci6: domain=0, physical bus=7 pcib7: <OFW PCI-PCI bridge> at device 3.0 on pci0 pcib7: domain 0 pcib7: secondary bus 6 pcib7: subordinate bus 6 pci7: <OFW PCI bus> on pcib7 pci7: domain=0, physical bus=6 pcib8: <OFW PCI-PCI bridge> at device 2.0 on pci0 pcib8: domain 0 pcib8: secondary bus 5 pcib8: subordinate bus 5 pcib8: memory decode 0xfa500000-0xfa5fffff pci8: <OFW PCI bus> on pcib8 pci8: domain=0, physical bus=5 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=5, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfa510000, size 16, enabled pcib8: allocated memory range (0xfa510000-0xfa51ffff) for rid 10 of pci0:5:4:1 map[18]: type Memory, range 64, base 0xfa500000, size 16, enabled pcib8: allocated memory range (0xfa500000-0xfa50ffff) for rid 18 of pci0:5:4:1 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=5, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfa530000, size 16, enabled pcib8: allocated memory range (0xfa530000-0xfa53ffff) for rid 10 of pci0:5:4:0 map[18]: type Memory, range 64, base 0xfa520000, size 16, enabled pcib8: allocated memory range (0xfa520000-0xfa52ffff) for rid 18 of pci0:5:4:0 pcib9: <OFW PCI-PCI bridge> at device 1.0 on pci0 pcib9: domain 0 pcib9: secondary bus 4 pcib9: subordinate bus 4 pci9: <OFW PCI bus> on pcib9 pci9: domain=0, physical bus=4 pcib10: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci10: <OFW PCI bus> on pcib10 pci10: domain=10, physical bus=10 found-> vendor=0x10de, dev=0x0141, revid=0xa2 domain=10, bus=10, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xa1000000, size 24, enabled map[14]: type Prefetchable Memory, range 64, base 0x90000000, size 28, enabled map[1c]: type Memory, range 64, base 0xa0000000, size 24, enabled unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0 unin0: Version 66 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 unin mapdev: start f8040000, len 262143 htpic0: Version 1.2, supports 4 CPUs and 124 irqs smu0: <Apple System Management Unit> on ofwbus0 smu0: Fan: EXPANSION SLOTS INTAKE type: 0 smu0: Fan: CPU A PUMP type: 0 smu0: Fan: CPU B EXHAUST type: 0 smu0: Fan: CPU A EXHAUST type: 0 smu0: Fan: CPU B INTAKE type: 0 smu0: Fan: CPU A INTAKE type: 0 smu0: Fan: BACKSIDE type: 0 smu0: Fan: DRIVE BAY A INTAKE type: 0 smu0: registered as a time-of-day clock, resolution 0.001000s iichb0: <SMU I2C controller> on smu0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 iichb1: <SMU I2C controller> on smu0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 iicbus1: <unknown card> at addr 0xd4 smusat0: <SMU Satellite Sensors> at addr 0xb2 on iicbus1 smusat1: <SMU Satellite Sensors> at addr 0xb0 on iicbus1 fwohci0: vendor=106b, dev=52 fwohci0: vendor=106b, dev=52 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39 at device 14.0 on pci1 ofw_pci mapdev: start fa400000, len 4096 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 fwe0: bpf attached fwe0: Ethernet address: 02:11:24:e5:13:d0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound = 0x00000000 fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, CYCLEMASTER mode ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci1 ofw_pci mapdev: start fa404000, len 16384 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci1 pcib0: failed to reserve resource for pcib1 pcib1: failed to allocate initial I/O port window (0-0xffffffff,0x10) atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ofw_pci mapdev: start fa402000, len 8192 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci2 ofw_pci mapdev: start 80080000, len 256 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached ohci0: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci2 ofw_pci mapdev: start 80081000, len 4096 usbus1 on ohci0 ohci0: usbpf: Attached ohci1: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci2 ofw_pci mapdev: start 80082000, len 4096 usbus2 on ohci1 ohci1: usbpf: Attached pcm0: <Apple I2S Audio Controller> mem 0x14000-0x14fff,0x8800-0x88ff,0x8900-0x89ff irq 30,15,16,28,11,12 on macio0 i2s_setup: changing format not supported yet. device_attach: pcm0 attach returned 45 iichb2: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iichb2: Revision: A1 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 iicbus2: <unknown card> at addr 0x24 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus2 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 24,19,20,23,17,18 on macio0 scc0: resetting hardware uart0: <z8530, channel A> on scc0 uart0: fast interrupt uart0: PPS capture mode: DCD uart1: <z8530, channel B> on scc0 uart1: fast interrupt uart1: PPS capture mode: DCD scc0: fast interrupt macgpio0: <gpio, linein-detect> gpio 42 irq 77 (no driver attached) macgpio0: <gpio, codec-clock-mux> gpio 49 (no driver attached) macgpio0: <gpio, codec-error-irq> gpio 50 irq 85 (no driver attached) macgpio0: <gpio, dig-hw-reset-c> gpio 9 (no driver attached) macgpio0: <gpio, timebase-enable> gpio 38 irq 73 (no driver attached) macgpio0: <gpio, vdnap0> gpio 20 (no driver attached) macgpio0: <gpio, mlb-good> gpio 19 (no driver attached) macgpio0: <gpio, slewing-done> gpio 56 irq 91 (no driver attached) macgpio0: <gpio, chip-fault> gpio 14 irq 49 (no driver attached) macgpio0: <gpio, programmer-switch> gpio 12 irq 47 (no driver attached) macgpio0: <gpio, smu-interrupt> gpio 13 irq 48 (no driver attached) gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on pci3 pcib3: slot 15 INTA is routed to irq 4 ofw_pci mapdev: start fa200000, len 2097152 gem0: invalid MAC address device_attach: gem0 attach returned 6 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci8 ofw_pci mapdev: start fa510000, len 65536 bge0: attempting to allocate 1 MSI vectors (8 supported) bge0: using IRQ 33554440 for MSI bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz bge0: NVRAM lock timedout! miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: OUI 0x001018, model 0x0035, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:14:51:64:67:11 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci8 ofw_pci mapdev: start fa530000, len 65536 bge1: attempting to allocate 1 MSI vectors (8 supported) bge1: using IRQ 33554441 for MSI bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz bge1: NVRAM lock timedout! miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: OUI 0x001018, model 0x0035, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:14:51:64:67:10 vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci10 vgapci0: Boot video device unin0: <dart, dart> mem 0xf8033000-0xf803bfff (no driver attached) iichb3: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0,1 on unin0 unin mapdev: start f8001000, len 4095 iichb3: Revision: A2 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 max66900: <Temp-Monitor MAX6690> at addr 0x9c on iicbus3 max66901: <Temp-Monitor MAX6690> at addr 0x98 on iicbus3 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus3 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus3 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 452, bank1 generation 453 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu0: Nominal frequency 2500Mhz pcr0: <PPC 970 Power Control Register> on cpu0 pcr0: No power mode data in device tree! device_attach: pcr0 attach returned 6 cpu1: <Open Firmware CPU> on cpulist0 cpu1: Nominal frequency 2500Mhz pcr1: <PPC 970 Power Control Register> on cpu1 pcr1: No power mode data in device tree! device_attach: pcr1 attach returned 6 cpu2: <Open Firmware CPU> on cpulist0 cpu2: Nominal frequency 2500Mhz pcr2: <PPC 970 Power Control Register> on cpu2 pcr2: No power mode data in device tree! device_attach: pcr2 attach returned 6 cpu3: <Open Firmware CPU> on cpulist0 cpu3: Nominal frequency 2500Mhz pcr3: <PPC 970 Power Control Register> on cpu3 cryptosoft0: <software crypto> on nexus0 crypto: assign cryptosoft0 driver id 0, flags 0x6000000 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 procfs registered Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) firewire0: bus manager 1 bge0: link state changed to DOWN bge1: link state changed to DOWN vlan: initialized, using hash tables with chaining lo0: bpf attached arc4random: read 32 bytes from preloaded cache arc4random: read 32 bytes from preloaded cache arc4random: read 32 bytes from preloaded cache tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 IPsec: Initialized Security Association Processing. usbus0: 480Mbps High Speed USB v2.0 usbus1: 12Mbps Full Speed USB v1.0 max66900: 2 sensors detected. max66900: Sensors max66900: Location : TUNNEL ID: 1 max66900: Location : TUNNEL HEATSINK ID: 2 max66901: 2 sensors detected. max66901: Sensors max66901: Location : BACKSIDE ID: 6 max66901: Location : KODIAK DIODE ID: 7 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <NEC EHCI root HUB> at usbus0 uhub1: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 usbus2: 12Mbps Full Speed USB v1.0 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ugen2.1: <NEC OHCI root HUB> at usbus2 uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ata2: hard reset ... ata2: SATA connect time=10ms status=00000113 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 uhub0: 2 ports with 2 removable, self powered ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 uhub2: 3 ports with 3 removable, self powered ata3: hard reset ... ata3: SATA connect timeout status=00000004 ata4: hard reset ... ata4: SATA connect timeout status=00000000 ata5: hard reset ... ata5: SATA connect timeout status=00000000 uhub1: 5 ports with 5 removable, self powered pass0 at ata0 bus 0 scbus1 target 0 lun 0 pass0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device pass0: Serial Number M0063NE3358 pass0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) pass1 at ata2 bus 0 scbus2 target 0 lun 0 pass1: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device pass1: Serial Number KRVN23ZAHA5DBD pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0 at ata2 bus 0 scbus2 target 0 lun 0 ada0: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device ada0: Serial Number KRVN23ZAHA5DBD ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) GEOM: new disk cd0 GEOM: new disk ada0 cd0 at ata0 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device cd0: Serial Number M0063NE3358 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: 4482MB (2295104 2048 byte sectors) Adding CPU 0, hwref=c9a8, awake=1 Waking up CPU 3 (dev=c0f0) Adding CPU 3, hwref=c0f0, awake=1 Waking up CPU 2 (dev=c3d8) Adding CPU 2, hwref=c3d8, awake=1 Waking up CPU 1 (dev=c6c0) Adding CPU 1, hwref=c6c0, awake=1 SMP: AP CPU #2 launched SMP: AP CPU #1 launched SMP: AP CPU #3 launched Trying to mount root from ufs:/dev/ada0s3 [rw]... WARNING: WITNESS option enabled, expect reduced performance. ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 ukbd0 on uhub0 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0 on uhub0 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 smu0: providing initial system time start_init: trying /sbin/init lo0: link state changed to UP bge0: link state changed to UP module_register: cannot register gem/miibus from if_gem.ko; already loaded from kernel Module gem/miibus failed to register: 17 module_register: cannot register pci/gem from if_gem.ko; already loaded from kernel Module pci/gem failed to register: 17 dclarke@eris$ Built from https://svn.freebsd.org/base/head/ which should be 'official'. Dennis
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41a47de2-76a8-c7d3-35fb-1f958d40af5b>