Date: Thu, 17 Jan 2002 06:35:36 -0500 From: Chris Demers <admin@govital.net> To: smp@freebsd.org Subject: problem with smp on intel motherboard Message-ID: <3C46B708.D5B64975@govital.net>
index | next in thread | raw e-mail
Greetings,
I have been having no problems with the SMP kernel configuration just up
to a couple days ago when I updated one of my last multi processor
systems. I have two other systems and have no problems with them they
are running superdot and asus motherboards and everything works fine. I
just did an update to 4.5-RC Tues Jan 15, 2002 and have completely lost
SMP on an intel motherboard. I have tried to cvsup from source now
about three times in the last two weeks with the same results on this
same board. It worked fine before when I was running 4.4-stable from
about two months ago. The kernel sees that it's running on a SMP board
but does not launch the send processor. Any help or suggestions would
be appreciated. I have double checked my kernel configuration and
everything is right. I have two other machines I also have running
that I also updated to 4.5-RC in the last week and they are fine. Here
are the log entries and mptable data:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-RC #0: Tue Jan 15 22:52:23 EST 2002
admin@xxxxx.xxxxxxxxxxxxxxx.com:/usr/obj/server/src/sys/WEB003
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.44-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 805240832 (786368K bytes)
avail memory = 778059776 (759824K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 1, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04a1000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 21 -> irq 5
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on
pci1
IOAPIC #0 intpin 23 -> irq 7
pci2: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=0960)> at device 7.0 on
pci2
pci3: <PCI bus> on pcib4
mlx0: <Mylex version 4 RAID interface> mem 0xfc000000-0xfc001fff irq 7
at device 7.1 on pci2
mlx0: DAC960PTL1, 1 channel, firmware 4.08-0-33, 8MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 26280MB (53821440 sectors) RAID 5 (online)
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem
0xf4100000-0xf4100fff irq 2 at device 12.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem
0xf4101000-0xf4101fff irq 2 at device 12.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem
0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 5 at device 14.0 on pci0
fxp0: Ethernet address 00:d0:b7:88:72:3f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device
18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq
5 at device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device 18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci4: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 0 lun 0
sa0: <SONY SDT-7000 0192> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f6ac0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x46
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f160
signature: 'PCMP'
base table length: 264
version: 1.4
checksum: 0x35
OEM ID: 'INTEL '
Product ID: 'Lancewood '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 164
extended table checksum: 209
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
0 0x11 BSP, usable 6 7 3
0x383fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 ISA
--
I/O APICs: APIC ID Version State Address
1 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
ExtINT active-hi edge 4 0
1 0
INT active-hi edge 4 1
1 1
INT active-hi edge 4 0
1 2
INT active-hi edge 4 3
1 3
INT active-hi edge 4 4
1 4
INT active-hi edge 4 6
1 6
INT active-hi edge 4 8
1 8
INT active-hi edge 4 10
1 10
INT active-hi edge 4 12
1 12
INT active-hi edge 4 13
1 13
INT active-hi edge 4 14
1 14
INT active-hi edge 4 15
1 15
INT active-lo level 0 12:A
1 19
INT active-lo level 0 12:A
1 19
INT active-lo level 0 14:A
1 21
INT active-lo level 0 18:D
1 21
INT active-lo level 2 7:A
1 23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
ExtINT active-hi edge 4 0
255 0
NMI active-hi edge 0 0:A
255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x30000000
address range: 0xc6000000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xf6000000
address range: 0x6100000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfc100000
address range: 0x2d00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfef00000
address range: 0x1100000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xcc000
address range: 0x1c000
--
Bus Heirarchy
bus ID: 4 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
===============================================================================
Chris Demers
admin@govital.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C46B708.D5B64975>