Date: Mon, 22 Apr 2002 17:43:28 -0700 From: Marcel Moolenaar <marcel@xcllnt.net> To: alpha@freebsd.org Subject: panic: cpu_initclocks: no clocks attached Message-ID: <20020423004328.GA634@dhcp01.pn.xcllnt.net>
index | next in thread | raw e-mail
Guys,
I tried to sync -current on my alpha and got stuck with a unbootable
system. I haven't seen anything that may relate to my problem on
the mailing list so I suspect it's something I did, but want to make
sure. The machine was running -current as of a couple of weeks ago
and no config changes were made other than 1) removing obsolete
options and/or add new default options, and 2) sort options and devices.
Any suggestions?
Information that follows are:
o The panic
o Kernel config
o Hints
o Verbose boot output
o Selected platform info
panic:
isa_probe_children: probing PnP devices
procfs registered
panic: cpu_initclocks: no clock attached
panic
Stopped at Debugger+0x34: zapnot v0,#0xf,a0 <v0=0x0,a0=0x6>
db>
Kernel config:
machine alpha
cpu EV5
ident ALPHA
maxusers 0
options CD9660
options COMPAT_43
options DDB
options DEC_ST550
options FFS
options INET
options INET6
options KTRACE
options NFSCLIENT
options P1003_1B
options PROCFS
options PSEUDOFS
options SCSI_DELAY=3000
options SOFTUPDATES
options SYSVMSG
options SYSVSEM
options SYSVSHM
options UFS_DIRHASH
options _KPOSIX_PRIORITY_SCHEDULING
device isa
device pci
device ata
device atapicd
device atkbd
device atkbdc 1
device bpf
device da
device dc
device ether
device fdc
device isp
device loop
device lpt
device mcclock
device md
device miibus
device pass
device ppbus
device ppc
device ppi
device psm
device pty
device random
device sc 1
device scbus
device sio
device vga
Verbose boot:
Entering /boot/kernel/kernel at 0xfffffc000032f4a0...
sio1: gdb debugging port
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Apr 19 21:39:43 PDT 2002
marcel@alpha.pn.xcllnt.net:/nfs/5.x/src/sys/alpha/compile/ALPHA
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00006c0000.
Digital Personal Workstation (Miata)
Digital Personal WorkStation 433au, 432MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020115
real memory = 131891200 (128800K bytes)
Physical memory chunk(s):
0x006e2000 - 0x07f0dfff, 126009344 bytes (15382 pages)
avail memory = 121634816 (118784K bytes)
random: <entropy source>
mem: <memory & I/O>
null: <null device, zero device>
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 111<WLEN,MWEN,BWEN>
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pcib0: <2117x PCI host bus adapter> on cia0
pci0: physical bus=0
map[10]: type 4, range 32, base 00009000, size 7, enabled
map[14]: type 1, range 32, base 80148000, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=0
map[20]: type 4, range 32, base 00009080, size 4, enabled
found-> vendor=0x1095, dev=0x0646, revid=0x01
bus=0, slot=4, func=0
class=01-01-80, hdrtype=0x00, mfdev=0
intpin=a, irq=1
found-> vendor=0x8086, dev=0x0484, revid=0x43
bus=0, slot=7, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base 90000000, size 22, enabled
found-> vendor=0x1011, dev=0x000d, revid=0x22
bus=0, slot=11, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=4
found-> vendor=0x1011, dev=0x0021, revid=0x02
bus=0, slot=20, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
pci0: <PCI bus> on pcib0
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x80148000-0x8014807f irq 0 at device 3.0 on pci0
dc0: interrupting at CIA irq 0
dc0: Ethernet address: 00:00:f8:75:7c:14
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
atapci0: <CMD 646 ATA controller> port 0x9080-0x908f irq 1 at device 4.0 on pci0ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x9080
ata0: mask=01 ostat0=00 ostat2=ff
ata0-master: ATAPI 14 eb
ata0: mask=01 stat0=00 stat1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x9088
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
PCI-ISA bridge with incorrect subclass 0x0
PCI-ISA bridge with incorrect subclass 0x0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 11.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 20.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 0
pcib1: I/O decode 0x8000-0x8fff
pcib1: memory decode 0x80000000-0x800fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: physical bus=1
map[10]: type 4, range 32, base 00008000, size 8, enabled
map[14]: type 1, range 32, base 80010000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=1, slot=8, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=12
pci1: <PCI bus> on pcib1
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.6
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x80010000-0x80010fff irq 12 at device 8.0 on pci1
pcib1: device isp0 requested decoded memory range 0x80010000-0x80010fff
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 12
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, resident F/W Revision 5.1.1
isp0: Last F/W revision was 5.1.1
isp0: 274 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 32 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 32 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
procfs registered
panic: cpu_initclocks: no clock attached
:
Hints:
hint.atkbd.0.at=atkbdc
hint.atkbd.0.irq=1
hint.atkbdc.0.at=isa
hint.atkbdc.0.port=0x060
hint.fd.0.at=fdc0
hint.fd.0.drive=0
hint.fdc.0.at=isa
hint.fdc.0.drq=2
hint.fdc.0.irq=6
hint.fdc.0.port=0x3F0
hint.mcclock.0.at=isa
hint.mcclock.0.port=0x70
hint.ppc.0.at=isa
hint.ppc.0.irq=7
hint.psm.0.at=atkbdc
hint.psm.0.irq=12
hint.sc.0.at=isa
hint.sio.0.at=isa
hint.sio.0.irq=4
hint.sio.0.port=0x3F8
hint.sio.1.at=isa
hint.sio.1.flags=0x50
hint.sio.1.irq=3
hint.sio.1.port=0x2F8
hint.vga.0.at=isa
Platform info:
>>>show config
Firmware
SRM Console: V6.4-278
ARC Console: 5.29
PALcode: VMS PALcode V1.18-11, OSF PALcode V1.21-11
SROM Version: v4.40
Processor
DECchip (tm) 21164A-2 Pass 433 MHz 96 KBytes SCache
2 MB BCache
PYXIS ASIC Pass 257
--
Marcel Moolenaar USPA: A-39004 marcel@xcllnt.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020423004328.GA634>