Date: Thu, 9 Dec 2004 20:21:35 -0500 (EST) From: "Greg A. Woods" <woods@weird.com> To: freebsd-alpha@freebsd.org Subject: FYI, no-go with booting FreeBSD-5.3 on AlphaServer ES40 Message-ID: <m1CcZTT-0024g4C@building.weird.com>
next in thread | raw e-mail | index | archive | help
I was just trying to take a chance on testing the bge(4) driver from
FreeBSD and so tried booting the latest release on my client's ES40.
Unfortunately even if it had not panic'ed I wouldn't have got the root
filesystem mounted as the bge(4) driver doesn't even seem to be a
default in the GENERIC kernel, which is pretty silly given that it the
driver for one of the more common GigE cards supplied by DEC/Compaq/HP,
e.g. the DEGXA-TX..... Looks like there are some problems with other
drivers too, but of course I don't know how serious they are.
Maybe this "boot -v" output will help someone get it further along.
Note that NetBSD does boot and run quite well on the system so long as
the ohci driver is omitted from the kernel and so long as none of the
IDE devices are accessed (or their driver is also omitted). The only
only problem is that both NetBSD's bge(4) and wm(4) drivers have rather
poor GigE performance on this system (once their minor bugs are fixed),
apparently because we have too much memory installed in it (and it's
only at half capacity!). What good is an alpha if you can't put more
than 4GB in it! ;-)
Perhaps omitting ochi and atapci et al would help FreeBSD boot on the
ES40 as well? For the very near term I can try netbooting other kernels
for testing. Note I'm not subscribed to the list though.
P00>>>boot ega0 -flags -v
(boot ega0.0.0.6.1 -flags -v)
Trying BOOTP boot.
Broadcasting BOOTP Request...
.Received BOOTP Packet File Name is: netboot
local inet address: 10.30.30.2
remote inet address: 10.30.30.1
TFTP Read File Name: netboot
netmask = 255.0.0.0
Server is on same subnet as client.
....
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 386c0(231104)
initializing HWRPB at 2000
initializing page table at 3fb54000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4006800010162
OSF PAL rev: 0x400690002015c
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM net boot, Revision 1.2
(root@ds10.wbnet, Fri Nov 5 04:07:46 UTC 2004)
Memory: 16777216 k
boot: ethernet address: 00:08:02:91:89:ae
net_open: server addr: 10.30.30.1
net_open: server path: /usr/export/freebsd-5.3-alpha-bootonly
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5c4ce0+0x3d990 syms=[0x8+0x64ab8+0x8+0x53436]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000344c30...
Unrecognized boot flag '-'.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 11:30:09 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000df6000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000df60d0.
ST6600
AlphaServer ES40, 666MHz
8192 byte page size, 4 processors.
CPU: EV67 (21264A) major=11 minor=14 extensions=0x307<BWX,FIX,CIX,MVI,PRECISE>
OSF PAL rev: 0x400690002015c
real memory = 17172619264 (16377 MB)
Physical memory chunk(s):
0x00e18000 - 0x3fb51fff, 1054056448 bytes (128669 pages)
0x40000000 - 0x3f0f9ffff, -1325793280 bytes (-161840 pages)
avail memory = 16832651264 (16052 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
smp_start_secondary: starting cpu 2
smp_start_secondary: cpu 2 started
smp_start_secondary: starting cpu 3
smp_start_secondary: cpu 3 started
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
pchip0:
wsba[0].reg = 0x800000
wsm[0].reg = 0x700000
tba[0].reg = 0x0
wsba[1].reg = 0x80000001
wsm[1].reg = 0x3ff00000
tba[1].reg = 0x0
wsba[2].reg = 0xc0000001
wsm[2].reg = 0x3ff00000
tba[2].reg = 0x40000000
wsba[3].reg = 0x0
wsm[3].reg = 0x0
tba[3].reg = 0x0
pchip1:
wsba[0].reg = 0x800000
wsm[0].reg = 0x700000
tba[0].reg = 0x0
wsba[1].reg = 0x80000001
wsm[1].reg = 0x3ff00000
tba[1].reg = 0x0
wsba[2].reg = 0xc0000001
wsm[2].reg = 0x3ff00000
tba[2].reg = 0x40000000
wsba[3].reg = 0x0
wsm[3].reg = 0x0
tba[3].reg = 0x0
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base 01000000, size 24, enabled
map[14]: type 4, range 32, base 00001000, size 8, enabled
map[18]: type 1, range 32, base 020c0000, size 12, enabled
found-> vendor=0x1002, dev=0x4755, revid=0x9a
bus=0, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001100, size 8, enabled
map[14]: type 1, range 64, base 020c1000, size 12, enabled
found-> vendor=0x9005, dev=0x00c0, revid=0x01
bus=0, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xfc (7560 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001200, size 8, enabled
map[14]: type 1, range 64, base 020c2000, size 12, enabled
found-> vendor=0x9005, dev=0x00c0, revid=0x01
bus=0, slot=2, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xfc (7560 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=b, irq=13
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001300, size 8, enabled
map[14]: type 1, range 32, base 020c3000, size 12, enabled
found-> vendor=0x1077, dev=0x2312, revid=0x02
bus=0, slot=3, func=0
class=0c-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 4, range 32, base 00001400, size 7, enabled
map[14]: type 1, range 32, base 020c5000, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=20
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x3200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001490, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
bus=0, slot=15, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=238
map[10]: type 1, range 32, base 020c4000, size 12, enabled
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=234
pci0: <display, VGA> at device 1.0 (no driver attached)
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1100-0x11ff mem 0x20c1000-0x20c1fff irq 12 at device 2.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100
ahc0: Enabling 39Bit Addressing
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 433 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ahc0: interrupting at TSUNAMI irq 12
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1200-0x12ff mem 0x20c2000-0x20c2fff irq 13 at device 2.1 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1200
ahc1: Enabling 39Bit Addressing
ahc1: Reading SEEPROM...done.
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 433 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ahc1: interrupting at TSUNAMI irq 13
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.8
isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x1300-0x13ff mem 0x20c3000-0x20c3fff irq 16 at device 3.0 on pci0
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x20c3000
isp0: using Memory space register mapping
isp0: interrupting at TSUNAMI irq 16
isp0: [GIANT-LOCKED]
isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.2.15
isp0: Installed in 64-Bit PCI slot
isp0: 839 max I/O commands supported
isp0: NVRAM Port WWN 0x210000e08b0ac8f8
isp0: bad execution throttle of 0- using 16
isp0: Mailbox Command 'INIT FIRMWARE' failed (COMMAND PARAMETER ERROR)
device_attach: isp0 attach returned 6
dc0: <Intel 21143 10/100BaseTX> port 0x1400-0x147f mem 0x20c5000-0x20c507f irq 20 at device 4.0 on pci0
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1400
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 08:00:2b:c4:b5:26
dc0: if_start running deferred for Giant
dc0: interrupting at TSUNAMI irq 20
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0x1490-0x149f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1490
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x20c4000-0x20c4fff irq 234 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x20c4000
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pcib1: <21271 PCI host bus adapter> on tsunami0
pci1: <PCI bus> on pcib1
pci1: physical bus=0
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 010f0000, size 12, enabled
found-> vendor=0x1077, dev=0x2312, revid=0x02
bus=0, slot=2, func=0
class=0c-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=28
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 32, base 01060000, size 17, enabled
map[14]: type 1, range 32, base 01080000, size 17, enabled
map[18]: type 4, range 32, base 00010280, size 5, enabled
found-> vendor=0x8086, dev=0x1008, revid=0x02
bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0xfc (7560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=32
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 00010100, size 8, enabled
map[14]: type 1, range 32, base 010f2000, size 8, enabled
map[18]: type 1, range 32, base 010f1000, size 12, enabled
found-> vendor=0x1000, dev=0x000c, revid=0x02
bus=0, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=36
map[10]: type 4, range 32, base 00010200, size 7, enabled
map[14]: type 1, range 32, base 010f2100, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=40
map[10]: type 1, range 64, base 010d0000, size 16, enabled
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=44
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x10000-0x100ff mem 0x10f0000-0x10f0fff irq 28 at device 2.0 on pci1
isp1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x10f0000
isp1: using Memory space register mapping
isp1: interrupting at TSUNAMI irq 28
isp1: [GIANT-LOCKED]
isp1: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.2.15
isp1: Installed in 64-Bit PCI slot
isp1: 839 max I/O commands supported
isp1: NVRAM Port WWN 0x210000e08b0a5ff8
isp1: bad execution throttle of 0- using 16
isp1: Mailbox Command 'INIT FIRMWARE' failed (HOST INTERFACE ERROR)
device_attach: isp1 attach returned 6
pci1: <network, ethernet> at device 3.0 (no driver attached)
sym0: <895> port 0x10100-0x101ff mem 0x10f1000-0x10f1fff,0x10f2000-0x10f20ff irq 36 at device 4.0 on pci1
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10f2000
sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10f1000
sym0: Delay (GEN=11): 246 msec, 36131 KHz
sym0: Delay (GEN=11): 227 msec, 39155 KHz
sym0: Delay (GEN=11): 227 msec, 39155 KHz
sym0: chip clock is 39155KHz
sym0: clock multiplier assumed
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 247 msec, 35985 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
CACHE TEST FAILED: DMA error (dstat=0xa0).sym0: CACHE INCORRECTLY CONFIGURED.
device_attach: sym0 attach returned 6
dc1: <Intel 21143 10/100BaseTX> port 0x10200-0x1027f mem 0x10f2100-0x10f217f irq 40 at device 5.0 on pci1
dc1: Reserved 0x80 bytes for rid 0x10 type 4 at 0x10200
miibus1: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> on miibus1
dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: bpf attached
dc1: Ethernet address: 08:00:2b:c4:7a:70
dc1: if_start running deferred for Giant
dc1: interrupting at TSUNAMI irq 40
dc1: [GIANT-LOCKED]
pci1: <network, ethernet> at device 6.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0001
psm0: strange result for test aux port (1).
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0001
psm: keyboard port failed.
psm0: failed to reset the aux device.
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: interrupting at ISA irq 6
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 666640007 Hz (firmware 666666666 Hz)
i8254 clock: 1193164 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Reducing kern.maxvnodes 522159 -> 100000
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounters tick every 0.976 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009ba570
GEOM: Configure md0a, start 8192 length 4415488 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
panic: HOST_MSG_LOOP with invalid SCB ff
cpuid = 0
Uptime: 16s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
--
Greg A. Woods
+1 416 218-0098 VE3TCP RoboHack <woods@robohack.ca>
Planix, Inc. <woods@planix.com> Secrets of the Weird <woods@weird.com>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m1CcZTT-0024g4C>