Date: Tue, 22 Feb 2005 09:43:30 +0100 From: Morten Liebach <m@mongers.org> To: Dan Nelson <dnelson@allantgroup.com> Cc: freebsd-questions@freebsd.org Subject: Re: Qlogic ISP 2200, DL-380 and EVA 5000 SAN; how? Message-ID: <20050222084330.GA19901@mongers.org> In-Reply-To: <20050221162947.GA67330@dan.emsphone.com> References: <20050221155422.GB3746@mongers.org> <20050221162947.GA67330@dan.emsphone.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2005-02-21 10:29:48 -0600, Dan Nelson wrote: > In the last episode (Feb 21), Morten Liebach said: > > I am trying to use a HP EVA 5000 SAN through a Qlogic ISP 2200 PCI > > FC-AL Adapter on a HP DL-380 (dmesg inline at the end), and so far > > I've failed. > > > > The HBA is recognized as: > > isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xf7ff0000-0xf7 ff0fff irq 10 at device 1.0 on pci6 > > > > I need to run 'camcontrol rescan all' to see anything more than the > > built in RAID, with ISP_TARGET_MODE and ispfw(4) compiled in. After > > running 'camcontrol rescan all' I get: > > > > # camcontrol devlist -v > > scbus3 on isp0 bus 0: > > <COMPAQ HSV110 (C)COMPAQ 3020> at scbus3 target 0 lun 0 (pass1) > > < > at scbus3 target -1 lun -1 () > > scbus-1 on xpt0 bus 0: > > < > at scbus-1 target -1 lun -1 (xpt0) > > > > I've been trying to rescan 3:0:0 and 3:0:1 and various other > > combinations. The SAN should have the volume available at LUN 1, > > according to our storage manager, but nothing is found there. > > Check your LUN masking; have you made it visible to this host (usually > by specifying the server's port or WWID)? Masking can be done at > either the RAID or the fibre-switch. Switches usually do masking at > the port or wwid level, so since you can see LUN 0 of that array, it's > probably being masked at the RAID array. These things look OK, we have both Linux, Windows and HP-UX hosts on the same SAN with the same setup for them. > > isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xf7ff0000-0xf7ff0fff irq 10 at device 1.0 on pci6 > > pass1 at isp0 bus 0 target 0 lun 0 > > pass1: <COMPAQ HSV110 (C)COMPAQ 3020> Fixed Storage Array SCSI-2 device > > pass1: 100.000MB/s transfers, Tagged Queueing Enabled > > LUN 0 looks like it's just a management LUN. A disk device would come > up as "Direct Access", not "Storage Array". Thanks, and have a nice day Morten -- http://m.mongers.org/weblog/ __END__
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050222084330.GA19901>