Date: Wed, 19 Jun 2013 01:07:04 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Gennady Proskurin <gprspb@mail.ru> Cc: freebsd-wireless@freebsd.org Subject: Re: svn commit: r251741 - head/sys/contrib/dev/ath/ath_hal/ar9300 Message-ID: <CAJ-VmomgV%2BT5TTEQVGsvwoTbNqJtdnj3_gz_05ZeZD3b5B-uVg@mail.gmail.com> In-Reply-To: <20130619072806.GA985@gpr.nnz-home.ru> References: <201306140815.r5E8FSPn029488@svn.freebsd.org> <20130619072806.GA985@gpr.nnz-home.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! Great! It looks like you definitely hit this more often than i do! Can you tell me which revision @ 8 june you were at? or go back to something on 8-june, verify it works, then tell me which revision? Let's fix this ASAP! Thanks! adrian On 19 June 2013 00:28, Gennady Proskurin <gprspb@mail.ru> wrote: > Replying to random ath commit. > > Now my ath wireless device does not work. It was broken some time after 8 Jun > (after my last update at 8 Jun it worked, now after today's update to r251945 > it does not). > > It spams log and console with messages: > > Jun 19 10:04:27 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:04:58 gpr last message repeated 101 times > Jun 19 10:05:42 gpr last message repeated 143 times > Jun 19 10:05:42 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing > Jun 19 10:05:42 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:05:47 gpr last message repeated 11 times > Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing > Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing > Jun 19 10:05:47 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:05:53 gpr last message repeated 19 times > ... > Jun 19 10:06:20 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:06:21 gpr last message repeated 4 times > Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22: Node is asleep; sending mgmt (type=0, subtype=176) > Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22: Node is asleep; sending mgmt (type=0, subtype=176) > Jun 19 10:06:22 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:06:23 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:06:23 gpr kernel: ath0: ath_tx_node_wakeup: an=0xffffff8002322000: node was already awake > Jun 19 10:06:24 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > Jun 19 10:06:25 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) > > > # uname -a > FreeBSD gpr.nnz-home.ru 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r251945+1330981: > Wed Jun 19 08:09:32 MSK 2013 > gpr@gpr.nnz-home.ru:/usr/obj/usr/src/freebsd-head/sys/GPR amd64 > > Boot log device info: > Jun 19 10:04:18 gpr kernel: ath0: <Atheros 5212> mem 0xfbdf0000-0xfbdfffff irq 19 at device 10.0 on pci0 > Jun 19 10:04:18 gpr kernel: ath0: AR2413 mac 7.9 RF2413 phy 4.5 > Jun 19 10:04:18 gpr kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0056 > > # pciconf -lv > ath0@pci0:0:10:0: class=0x020000 card=0x2051168c chip=0x0013168c rev=0x01 hdr=0x00 > vendor = 'Atheros Communications Inc.' > device = 'AR5212/AR5213 Wireless Network Adapter' > class = network > subclass = ethernet > > # rc.conf > wlans_ath0="wlan0" > create_args_wlan0="wlandev ath0 wlanmode hostap" > ifconfig_wlan0="10.X.X.X/24" > hostapd_enable="YES" > > I can do additional tests or submit more info, if necessary. > > On Fri, Jun 14, 2013 at 08:15:28AM +0000, Adrian Chadd wrote: >> Author: adrian >> Date: Fri Jun 14 08:15:28 2013 >> New Revision: 251741 >> URL: http://svnweb.freebsd.org/changeset/base/251741 >> >> Log: >> The AR9300 HAL uses this config to program AR_PHY_SWITCH_COM_2 on AR9485 >> NICs which have bluetooth coexistence enabled. >> >> The WB225 NIC has the common antenna switch configuration set to 0x0 which >> disables all external switch bit setting. This obviously won't work when >> doing coexistence. >> >> This value is a magic value from the windows .inf files. It _looks_ right >> but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo >> has an earlier BT device which doesn't actually _have_ firmware on it. >> So I have to fix ath3kfw to handle loading in firmware into the newer >> NICs before I can finish testing this. >> >> This may not hold true for CUS198, which is another custom AR9485 board. >> >> Modified: >> head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c >> >> Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c >> ============================================================================== >> --- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14 08:13:21 2013 (r251740) >> +++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14 08:15:28 2013 (r251741) >> @@ -249,6 +249,9 @@ ar9300_attach_freebsd_ops(struct ath_hal >> /* LNA diversity functions */ >> ah->ah_divLnaConfGet = ar9300_ant_div_comb_get_config; >> ah->ah_divLnaConfSet = ar9300_ant_div_comb_set_config; >> + >> + /* Setup HAL configuration defaults */ >> + ah->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable = 0x000bbb88; >> } >> >> HAL_BOOL >> _______________________________________________ >> svn-src-head@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/svn-src-head >> To unsubscribe, send any mail to "svn-src-head-unsubscribe@freebsd.org" >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomgV%2BT5TTEQVGsvwoTbNqJtdnj3_gz_05ZeZD3b5B-uVg>