Date: Sat, 2 Jan 2010 15:38:11 +0800 From: Henry Hu <henry.hu.sh@gmail.com> To: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> Cc: freebsd-multimedia@freebsd.org Subject: Re: usleep's pvrxxx port and /boot/loader.conf - panic Message-ID: <53a1e0711001012338v4ba68961o4a1d26a40abce396@mail.gmail.com> In-Reply-To: <20100102001753.090c89ad.torfinn.ingolfsen@broadpark.no> References: <20100102001753.090c89ad.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jan 2, 2010 at 7:17 AM, Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> wrote: > It looks like usleep's pvrxxx port (the 09042008 version) works quite > nicely with my Hauppauge PVR-500 under FreeBSD 7.2-stable: > tingo@kg-fil$ uname -a > FreeBSD kg-fil.kg4.no 7.2-STABLE FreeBSD 7.2-STABLE #0: Fri Jan 1 20:50:58 CET 2010 root@kg-fil.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64 > > from /var/log/messages: > Jan 1 23:57:38 kg-fil kernel: cxm0: <Conexant iTVC16 MPEG Coder> mem 0xe0000000-0xe3ffffff irq 18 at device 8.0 on pci2 > Jan 1 23:57:38 kg-fil kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 > Jan 1 23:57:38 kg-fil kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 > Jan 1 23:57:38 kg-fil kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only > Jan 1 23:57:38 kg-fil kernel: iicbus0: <unknown card> at addr 0 > Jan 1 23:57:38 kg-fil kernel: iicbus0: <unknown card> at addr 0 > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: Second (radio) tuner idx 101 > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: ivtv version > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584 > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: audio processor = CX25843 (type = 25) > Jan 1 23:57:38 kg-fil kernel: <2>tveeprom: decoder processor = CX25843 (type = 1e) > Jan 1 23:57:38 kg-fil kernel: tuner type: 56 > Jan 1 23:57:38 kg-fil kernel: cxm0: Eeprom PAL > Jan 1 23:57:38 kg-fil kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm > Jan 1 23:57:38 kg-fil kernel: tuner: switching to v4l2 > Jan 1 23:57:38 kg-fil kernel: before tuner_command! > Jan 1 23:57:38 kg-fil kernel: tuner: tv freq set to 55.25 > Jan 1 23:57:38 kg-fil kernel: tuner: tv 0x05 0xe3 0xce 0x01 > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Video signal: not present > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected format: NTSC-M > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected audio mode: forced mode > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected audio standard: forced audio standard > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Audio muted: yes > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Audio microcontroller: running > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Configured audio standard: A2-BG > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Configured audio mode: undefined > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified standard: PAL-BDGHI > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified input: Tuner > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified audio input: Tuner > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified audioclock freq: 48 kHz > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Preferred audio mode: stereo > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Selected 65 MHz format: autodetect > Jan 1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Selected 45 MHz format: chroma > Jan 1 23:57:48 kg-fil kernel: cxm0: [ITHREAD] > Jan 1 23:57:50 kg-fil kernel: cxm0: encoder firmware version 0x2060039 > Jan 1 23:57:50 kg-fil kernel: cxm1: <Conexant iTVC16 MPEG Coder> mem 0xe4000000-0xe7ffffff irq 19 at device 9.0 on pci2 > Jan 1 23:57:50 kg-fil kernel: cxm_iic1: <Conexant iTVC15 / iTVC16 I2C controller> on cxm1 > Jan 1 23:57:50 kg-fil kernel: iicbb1: <I2C bit-banging driver> on cxm_iic1 > Jan 1 23:57:50 kg-fil kernel: iicbus1: <Philips I2C bus> on iicbb1 master-only > Jan 1 23:57:50 kg-fil kernel: iicbus1: <unknown card> at addr 0 > Jan 1 23:57:50 kg-fil kernel: iicbus1: <unknown card> at addr 0 > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: Second (radio) tuner idx 101 > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: ivtv version > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584 > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: audio processor = CX25843 (type = 25) > Jan 1 23:57:50 kg-fil kernel: <2>tveeprom: decoder processor = CX25843 (type = 1e) > Jan 1 23:57:50 kg-fil kernel: tuner type: 56 > Jan 1 23:57:50 kg-fil kernel: cxm1: Eeprom PAL > Jan 1 23:57:50 kg-fil kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm > Jan 1 23:57:50 kg-fil kernel: tuner: switching to v4l2 > Jan 1 23:57:50 kg-fil kernel: before tuner_command! > Jan 1 23:57:50 kg-fil kernel: tuner: tv freq set to 55.25 > Jan 1 23:57:50 kg-fil kernel: tuner: tv 0x05 0xe3 0xce 0x01 > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Video signal: not present > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected format: NTSC-M > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected audio mode: forced mode > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected audio standard: forced audio standard > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Audio muted: yes > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Audio microcontroller: running > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Configured audio standard: A2-BG > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Configured audio mode: undefined > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified standard: PAL-BDGHI > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified input: Tuner > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified audio input: Tuner > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified audioclock freq: 48 kHz > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Preferred audio mode: stereo > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Selected 65 MHz format: autodetect > Jan 1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Selected 45 MHz format: chroma > Jan 1 23:58:03 kg-fil kernel: cxm1: [ITHREAD] > Jan 1 23:58:03 kg-fil kernel: cxm1: encoder firmware version 0x2060039 > > (Note: I haven't actually tested it with mplayer etc yet, that is why I say that it "looks" like it works. > But it will work). > But ther is one slight problem: if I try to load the cxm_iic and cxm modules in /boot/loader.conf, > the machine panics during boot. > If I load the modules manually after boot, everything is fine. > > Is there some other place that I can load these modules autmatically, after the machine has booted? > A startup script or something like it? You may try /etc/rc.local > -- > Regards, > Torfinn Ingolfsen > > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" > Cheers, Henry
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53a1e0711001012338v4ba68961o4a1d26a40abce396>