Date: 02 May 2002 15:49:18 +0300 From: Harald Schmalzbauer <H@Schmalzbauer.de> To: freebsd-stable@freebsd.org Cc: freebsd-current@freebsd.org Subject: Re: CD-Boot hangs on rootmounting MD (+DP1 crashes) Message-ID: <1020343759.1137.2.camel@hry.muc.wearix.com> In-Reply-To: <1020335399.1137.0.camel@hry.muc.wearix.com> References: <1020335399.1137.0.camel@hry.muc.wearix.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Am Do , 2002-05-02 um 13.29 schrieb Harald Schmalzbauer: PXEbooting the -stable kernel.gz and mfsroot results in the same system hang (mounting root from ufs:/dev/md0c). DP1 crashes with the following: unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c03> can't assign resources (memory) psmcpnp0: irq resource info is missing; assuming irq 12 Fatal trap12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0xc164cac1 stack pointer = 0x10:0xcb931d00 frame pointer = 0x10:0xcb931d1c code segment = base 0x0, limit 0xfffff, type 0x1b DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 27 (irq10: sn0) trap number = 12 panic: page fault From the console print I can't find a sn device nor any assigned irq10. Hardware description: PIII-M (LV) 800 256MB (2x 128MB mini DIMM) i815em VGA/Chipset, heavily Sony-modified Award BIOS (showing only one IDE while FreeBSD claims to find also secondary, almost no adjustments possible (except PNP-OS yes/no)) Orinoco mini-PCI WaveLAN USB-MemoryStick reader TexasInstruments IEEE-1394 TexasInstruments PCI-1410 CARDBUS CONTROLLER Ricoh RL5C475 CARDBUS CONTROLLER ICH Modem 80F2 82801BAM USB 2442 82801BAM USB 2444 Intel Pro100/VE Ethernet (I think only PHY for i815) I hope this helps helping me;-) Thanks, -Harry > Hello all, > > I'm trying to install FreeBSD 4.5-stable-iso from yesterday and I have > the same problem like with 4.5-release: After probing the sistem hangs > when trying to mount root from md. > > My box is a VAIO SRX41P with the PC-CARD CDROM. I have no Disk-Drive so > unfortunately I can't check floppy-boot. > > I think this has something to do with PC-Card. I can remember I had a > similar problem when PXE-booting a Soekris Net4501 (CF-Memory, no ATA). > > Right now I'm downloading DP1 to check it with 5.0. > > Just to mention: Booting OpenBSD is working but CD is not supported. > > Suggestions are welcome (BIOS doesn't boot USB-CD, no Floppy available, > no Firewire CD, PXE-Boot possible but first I'll try 5.0). > > Thanks, > > -Harry > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1020343759.1137.2.camel>