Date: Thu, 5 Sep 2002 22:59:02 -0700 (PDT) From: Nate Lawson <nate@root.org> To: Mike Tancsa <mike@sentex.net> Cc: current@freebsd.org Subject: Re: PC hangs with power light off Message-ID: <Pine.BSF.4.21.0209052253470.3788-100000@root.org> In-Reply-To: <q87gnukeittnpm6cqfnjj29d6dc38d8gr6@4ax.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Oh, I forgot to mention that I have the EXACT same computer sitting next to this one and running -STABLE and it has 60 days uptime. -Nate On Thu, 5 Sep 2002, Mike Tancsa wrote: > We had a couple of Intel boards that did this on Win2k as well. Tried a > few BIOS updates and it didnt help. We ended up just replacing them in the > end :-( I had more problems with the 810s than any other chipset in the > past couple of years. > > ---Mike > > On Thu, 5 Sep 2002 15:30:54 -0700 (PDT), in sentex.lists.freebsd.current > you wrote: > > >I have a Celeron 500 box (i810 chipset, 128MB/IDE/SCSI) that hangs every > >24 hours or so (usually overnight). I've never had it hang during the day > >or while I was using it. It's running a kernel/world from 8/28 although > >this has been happening ever since I installed -current on this box in > >June. > > > >The symptoms are I come back to it and the power light is off although the > >fan is still running on the power supply. Numlock is frozen (light is > >on). Nothing can revive it. Pressing the power button doesn't do > >anything either but I can hold it down for 8 secs and the box powers > >off. > > > >All these symptoms indicate to me that it is going into some kind of > >suspend mode but I have all of that turned off in the BIOS. APM is > >commented out (not just disabled) in my kernel config. ACPI is loaded. > > > >Thanks for any help, > >Nate > > > > > >dmesg > >----- > >Copyright (c) 1992-2002 The FreeBSD Project. > >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > >FreeBSD 5.0-CURRENT #9: Wed Aug 28 18:20:38 PDT 2002 > > nate@moe:/usr/obj/usr/src/sys/MOE > >Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e7000. > >Preloaded elf module "/boot/kernel/agp.ko" at 0xc04e70a8. > >Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e7150. > >Timecounter "i8254" frequency 1193182 Hz > >Timecounter "TSC" frequency 498487691 Hz > >CPU: Pentium II/Pentium II Xeon/Celeron (498.49-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x665 Stepping = 5 > > > >Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA > >T,PSE36,MMX,FXSR> > >real memory = 133103616 (129984K bytes) > >avail memory = 123813888 (120912K bytes) > >Pentium Pro MTRR support enabled > >Using $PIR table, 7 entries at 0xc00fdf50 > >npx0: <math processor> on motherboard > >npx0: INT 16 interface > >acpi0: <PTLTD RSDT > on motherboard > >acpi0: power button is handled as a fixed feature programming model. > >Timecounter "ACPI-fast" frequency 3579545 Hz > >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > >acpi_cpu0: <CPU> on acpi0 > >pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > >pci0: <ACPI PCI bus> on pcib1 > >agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem > >0xf4000000-0xf407ffff,0xf800 > >0000-0xfbffffff irq 3 at device 1.0 on pci0 > >pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > >pci1: <ACPI PCI bus> on pcib2 > >fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3400-0x343f mem > >0xf4100000-0xf41f > >ffff,0xf4300000-0xf4300fff irq 5 at device 11.0 on pci1 > >fxp0: Ethernet address 00:d0:b7:21:ff:2d > >inphy0: <i82555 10/100 media interface> on miibus0 > >inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x3440-0x347f mem > >0xf4200000-0xf42f > >ffff,0xf4301000-0xf4301fff irq 9 at device 13.0 on pci1 > >fxp1: Ethernet address 00:d0:b7:69:21:74 > >inphy1: <i82555 10/100 media interface> on miibus1 > >inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >ahc_pci0: <Adaptec 2940 Ultra2 SCSI adapter> port 0x3000-0x30ff mem > >0xf4302000-0 > >xf4302fff irq 3 at device 14.0 on pci1 > >aic7890/91: Ultra2 Wide Channel A, SCSI Id=14, 32/253 SCBs > >isab0: <PCI-ISA bridge> at device 31.0 on pci0 > >isa0: <ISA bus> on isab0 > >atapci0: <Intel ICH0 ATA33 controller> port 0x1800-0x180f at device 31.1 > >on pci0 > >ata0: at 0x1f0 irq 14 on atapci0 > >ata1: at 0x170 irq 15 on atapci0 > >uhci0: <Intel 82801AB (ICH0) USB controller> port 0x1820-0x183f irq 11 at > >device > > 31.2 on pci0 > >usb0: <Intel 82801AB (ICH0) USB controller> on uhci0 > >usb0: USB revision 1.0 > >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >uhub0: 2 ports with 2 removable, self powered > >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > >pci0: <multimedia, audio> at device 31.5 (no driver attached) > >acpi_button0: <Power Button> on acpi0 > >atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > >kbd0 at atkbd0 > >psm0: failed to get data. > >psm0: <PS/2 Mouse> irq 12 on atkbdc0 > >psm0: model Generic PS/2 mouse, device ID 0 > >sio0 port 0x3f8-0x3ff irq 4 on acpi0 > >sio0: type 16550A > >fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port > >0x3f7,0x3f2-0 > >x3f5 irq 6 drq 2 on acpi0 > >fdc0: FIFO enabled, 8 bytes threshold > >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > >ppc0 port 0x378-0x37f irq 7 on acpi0 > >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > >plip0: <PLIP network interface> on ppbus0 > >lpt0: <Printer> on ppbus0 > >lpt0: Interrupt-driven port > >ppi0: <Parallel I/O> on ppbus0 > >orm0: <Option ROMs> at iomem > >0xd2800-0xd2fff,0xd1000-0xd27ff,0xd0000-0xd0fff,0xc > >0000-0xc7fff on isa0 > >sc0: <System console> at flags 0x100 on isa0 > >sc0: VGA <16 virtual consoles, flags=0x300> > >sio1: configured irq 3 not in bitmap of probed irqs 0 > >sio1: port may not be enabled > >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > >Timecounters tick every 10.000 msec > >Profiling kernel, textsize=2119936 [c0123a20..c0329320] > >cputime 103, empty_loop 4, nullfunc_loop_profiled 288, mcount 397, > >mexitcount 267 > >Profiling overheads: mcount: 98+294, 258+134; mexitcount: 98+162, 234+26 > >nsec > >Profiling overheads: mcount: 49+147, 129+67; mexitcount: 49+81, 117+13 > >cycles > >acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% > >ad0: DMA limited to UDMA33, non-ATA66 cable or device > >ad0: 8297MB <Maxtor 90841U2> [16858/16/63] at ata0-master UDMA33 > >acd0: CDROM <SAMSUNG CD-ROM SC-140> at ata1-master PIO4 > >Waiting 5 seconds for SCSI devices to settle > >(targbh0:ahc0:0:-1:-1): Lun now enabled for target mode > >Mounting root from ufs:/dev/ad0s1a > >WARNING: / was not properly dismounted > >WARNING: /usr was not properly dismounted > >/usr: mount pending error: blocks 4 files 1 > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-current" in the body of the message > > Mike Tancsa (mdtancsa@sentex.net) > Sentex Communications Corp, > Waterloo, Ontario, Canada > "Given enough time, 100 monkeys on 100 routers > could setup a national IP network." (KDW2) > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0209052253470.3788-100000>