Date: Thu, 9 Oct 2008 21:08:04 +0300 From: "Georgi Iovchev" <geo@pulsar.bg> To: <freebsd-acpi@freebsd.org> Subject: can not wake on lan after halt -p (or shutdown -p now) on releng_7 and releng_7_0 Message-ID: <1C96321E3BE34064B1A1FF306147FB85@geo>
next in thread | raw e-mail | index | archive | help
Hello list.
Recently I posted a mail to freebsd-stable list about my problem, but =
still no response. I'll post my problem here too, because I think that =
it may be ACPI related.
I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R =
motherboard. Integrated network card is Realtek 8111B. I can not wake =
the computer after I shutdown it from FreeBSD.
It is a dualboot system - windows xp and freebsd. If I shutdown the =
computer from windows - later I can wake it up with magic packet. Even =
if I shutdown the machine on the boot menu with the power button - than =
later I can wake on lan. The only situation where I CANNOT wake it is =
when I shutdown the machine from freebsd (halt -p).
First I tested with 7.0-RELEASE-p5 amd64 (RELENG_7_0) and than I =
upgraded to 7.1 PRERELASE amd64 (RELENG_7). I also tested with two =
network cards - the integrated one Realtek 8111B and another one Intel =
PRO1000PT PCI-E with WOL enabled.
With both nics and both freebsd versions the situation is the same - =
after shutdown from bsd the computer is not able to wake on lan. The =
indication on the switch port says that after shut down there is active =
link.
Here is some information after last update:
Code:
[root at backup ~]# uname -a
FreeBSD backup.pulsar.bg 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #1: Mon =
Oct 6 17:01:26 EEST 2008 root at =
backup.pulsar.bg:/usr/obj/usr/src/sys/MYCONF amd64
[root at backup ~]# pciconf -lv
...
re0 at pci0:3:0:0: class=3D0x020000 card=3D0xe0001458 chip=3D0x816810ec =
rev=3D0x01 hdr=3D0x00
vendor =3D 'Realtek Semiconductor'
device =3D 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class =3D network
subclass =3D ethernet
...
em0 at pci0:1:0:0: class=3D0x020000 card=3D0x10838086 chip=3D0x10b98086 =
rev=3D0x06 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D '82572EI PRO/1000 PT Desktop Adapter (Copper)'
class =3D network
subclass =3D ethernet
...
[root at backup ~]# ifconfig re0 wol
[root at backup ~]# ifconfig em0 wol
[root at backup ~]# ifconfig
em0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
=
options=3D19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:1b:21:22:52:cd
media: Ethernet autoselect
status: no carrier
re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu =
1500
=
options=3D389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAS=
T,WOL_MCAST,WOL_MAGIC>
ether 00:1f:d0:24:19:e9
inet 78.142.42.158 netmask 0xfffffff0 broadcast 78.142.42.159
inet 192.168.0.6 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet 127.0.0.1 netmask 0xff000000
I suppose that I should post more info but I dont know what exactly is =
needed.
Need help!
10x in advance
Georgi Iovchev
p.s.: original post freebsd-stable: =
http://lists.freebsd.org/pipermail/freebsd-stable/2008-October/045689.htm=
l
p.s.2: in case of response please cc to freebsd@pulsar.bg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1C96321E3BE34064B1A1FF306147FB85>