Date: Thu, 16 Jan 1997 10:36:49 -0800 From: Ulf Zimmermann <ulf@Alameda.net> To: Mike Tancsa <mike@sentex.net>, Francois Pollet <fpollet@relay.perceval.net>, freebsd-hardware@FreeBSD.ORG Subject: Re: ASUS T2P4 and Adaptec 2940AU Message-ID: <3.0.32.19970116103648.006dac24@Gatekeeper-3.Lamb.net>
next in thread | raw e-mail | index | archive | help
At 08:37 AM 1/16/97 -0500, Mike Tancsa wrote: >At 12:42 PM 1/16/97 +0100, Francois Pollet wrote: >> >>Troubles in reboot with 2.1.6-RELEASE >> >>ASUS P55T2P4 bios 1.08 >>AHA2940AU bios 1.21 >>Seagate ST32155N 2.1Gb firmware 0532 with a FreeBSD only partition and >>standard MBR >> >>No problems during installation, geometry used is the geometry reported >>by a DOS fdisk (261/255/63), no errors reported during installation >> >>Everything works perfectly after a power on >> >>2940AU hangs and fails to detect SCSI devices after a soft or a hard reboot >>A real power on is always required to restart the machine >> >>First I thought it was a compatibility problem between the T2P4 and the >2940AU >>but it seems to work fine with a DOS only partition >> >>Can somebody help ? > > >I am sure its not what you wanted to hear, but I had the exact same problem >with the above mentioned card on an ECS Pentium motherboard... I ended up >bugging my distributor to find me a generic 2940.... I am very suprised >that someone said they got that particular card working with 2.1.5. I >could not even get 2.1.5 to recognize the card for what it was. > > ---Mike I use a 2940U in a 2.1.5 system. It gives me sometimes at reboot the problem, that it lists all scsi devices found, but then never comes back with the Bios installed message, reset or power cycle helps mostly. Ulf. ----------------------------------------------------------- Alameda Networks, Inc. | Ulf Zimmermann (ulf@Alameda.net) 1525 Pacific Avenue | Phone: (510)769-2936 Alameda, CA 94501 | Fax : (510)521-5073
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19970116103648.006dac24>