Date: Wed, 2 Jun 2004 08:21:10 -0400 From: Bart Silverstrim <bsilver@chrononomicon.com> To: freebsd-questions Questions <freebsd-questions@FreeBSD.ORG> Subject: 5.2.1 boot-install Message-ID: <54C692FE-B48F-11D8-818D-000A956D2452@chrononomicon.com>
next in thread | raw e-mail | index | archive | help
I downloaded the 2 meg boot floppy for installing FreeBSD 5.2.1. I
wanted to burn it to a CD (I usually install via ftp, and use a smaller
CD that I have here to transport the media since I didn't want to burn
a full ISO).
I downloaded the boot image and checked the MD5.
On my iBook, I ran
mkisofs -pad -b boot.flp -R -o ./cdboot.iso ./boot.flp
I then used the disk utility to burn the resulting image.
I have used this technique with 4.9, and it worked. On a machine i
wanted to install 5.2.1 on, it won't (this is a machine the 4.9 install
worked on fine). The boot process starts, and it locks up ending with
this in the bootup sequence:
GEOM: create disk ad0 dp=0xc2006560
ad0: 19092MB <ST320014A> [38792/16/63] at ata0-masster UDMA100
ata1-master: FAILURE - ATA_IDENTIFY status=7f <READY, DMA_READY, DSC,
DRQ, CORRECTABLE, INDEX_ERROR> error=7f<UNCORRECTABLE, MEDIA_CHANGED,
NID_NOT_FOUND, MEDIA_CHANGE_REQUEST, ABORTED,NO_MEDIA,ILLEGAL_LENGTH>
LBA=0
It doesn't like the CDROM drive? Did I miss something in the boot disc
creation? There may be a minor typo or two in the above error...I had
to transcribe it :-)
Here's what 4.9 is reporting post-bootup...
$ dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.9-RELEASE-p5 #0: Mon Apr 26 10:29:04 EDT 2004
bsilver@bsdtest1.athensasd.org:/usr/src/sys/compile/WINE
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 2.00GHz (1999.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 132382720 (129280K bytes)
avail memory = 123412480 (120520K bytes)
Preloaded elf kernel "kernel" at 0xc0548000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f52d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem
0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on
pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f
irq 5 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f
irq 9 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xdc00-0xdc3f mem
0xff8ff000-0xff8fffff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:0c:f1:b7:06:fe
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 3
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 3
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 19092MB <ST320014A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-152G> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54C692FE-B48F-11D8-818D-000A956D2452>