Date: Fri, 5 Jan 1996 15:21:35 GMT From: Mark Diekhans <markd@grizzly.com> To: questions@freebsd.org Subject: PCMCIA modem problems Message-ID: <199601051521.PAA00294@Grizzly.COM>
next in thread | raw e-mail | index | archive | help
I am trying to get the port of the 2.0 pcmcia driver and daemon to 2.1 posted
by Dan Mutz <dmuntz@eecs.umich.edu> working. The card I have is a Cardinal
28.8 modem.
Everything seems to be working find. The kernel recognizes the insertion of
the card:
Jan 5 14:51:47 kestrel /kernel: qcic: card inserted in slot 0
If pcmciad is running when the card is inserted, the whole system locks
up with the bell ringing until the card is removed. It doen't work much
better if the card is inserted before pcmciad is started.
However, if the system is booted with the card in the slot things work a
lot better when pcmciad is started (see output below). The daemon recognizes
the card and appears to configure the sio1 correctly:
Jan 5 15:07:25 kestrel /kernel: sio1: type 16550A
But any attempt to open /dev/cuaa1 just hangs.
It would be perfectly acceptable to boot with the card in, so getting
around the hand is enough.
Bios is: PhoenixBIOS A486 1.03 04L
Any help greatly appreciated,
Mark <markd@grizzly.com>
==============================================================================
Output of debug pcmciad:
------------------------------------------------------------------------------
#pcmciad -v -d
Card manuf Cardinal Technologi, vers MVP288C2
Configuration entries:
Index code = 0x21, driver name = sio1
Device type = 2
Tuple code = 0x1, len = 2
Tuple code = 0x15, len = 40
Tuple code = 0x20, len = 4
Tuple code = 0x21, len = 2
Tuple code = 0x22, len = 4
Tuple code = 0x22, len = 9
Tuple code = 0x22, len = 9
Tuple code = 0x22, len = 9
Tuple code = 0x22, len = 13
Tuple code = 0x22, len = 9
Tuple code = 0x22, len = 9
Tuple code = 0x22, len = 18
Tuple code = 0x1a, len = 5
Tuple code = 0x1b, len = 20
Tuple code = 0x1b, len = 7
Tuple code = 0x1b, len = 7
Tuple code = 0x1b, len = 7
Tuple code = 0x1b, len = 3
Tuple code = 0xff, len = 0
Using I/O addr 0x2f8, size 8
Setting config reg at offs 0x200 to 0x21
Reset time = 50 ms
Setting CCSR reg to 0x28
Assigning I/O window 0, start 0x2f8, size 0x8
Assign sio1, io 0x2f8, mem 0x0, 0 bytes, irq 3
==============================================================================
/etc/pcmcia.conf:
------------------------------------------------------------------------------
#
# Pool parameters.
#
io 0x2F8 - 0x360
irq 3
memory 0xd4000 96k
#
# Card database.
#
card "Cardinal Technologi" "MVP288C2" tty
config 0x21 "sio1" 3
device tty
==============================================================================
sio1 entry in kernel config file
------------------------------------------------------------------------------
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
==============================================================================
Output of dumpcis:
------------------------------------------------------------------------------
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 40
000: 04 01 43 61 72 64 69 6e 61 6c 20 54 65 63 68 6e
010: 6f 6c 6f 67 69 65 73 00 4d 56 50 32 38 38 43 32
020: 00 30 32 31 00 41 00 ff
Version = 4.1, Manuf = [Cardinal Technologies],card vers = [MVP288C2]
Addit. info = [021],[A]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 13 00 00 00
PCMCIA ID = 0x13, OEM ID = 0x0
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #5, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #6, code = 0x22 (Functional EXT), length = 9
000: 05 1f 0f 00 03 00 00 03 00
Modem interface capabilities:
Tuple #7, code = 0x22 (Functional EXT), length = 9
000: 06 1f 0f cc 04 00 cc 04 00
Modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 9
000: 07 1f 0f cc 04 00 cc 04 00
Modem interface capabilities:
Tuple #9, code = 0x22 (Functional EXT), length = 13
000: 02 06 00 3f 39 03 03 0f 07 00 01 b5 ff
Data modem services available:
Tuple #10, code = 0x22 (Functional EXT), length = 9
000: 13 06 00 1f 00 7a 00 b5 ff
Tuple #11, code = 0x22 (Functional EXT), length = 9
000: 23 06 00 1f 00 32 00 b5 ff
Tuple #12, code = 0x22 (Functional EXT), length = 18
000: 84 06 00 0b 02 07 14 00 10 00 08 00 04 00 02 00
010: 00 00
Tuple #13, code = 0x1a (Configuration map), length = 5
000: 01 30 00 02 17
Reg len = 2, config register addr = 0x200, last config = 0x30
Registers: XXX-X---
Tuple #14, code = 0x1b (Configuration entry), length = 20
000: e0 41 9d 78 3d 86 46 26 4c e7 5f aa 60 f8 03 07
010: 30 bc 86 28
Config index = 0x20(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Power down supply current: 4.5 x 1mA
RDY/BSY scale Speed = 5.0 x 10 ms, scaled by 10
Card decodes 31 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 6 9 11 13 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Read-only) (Power down supported) (Ext byte = 0x3)
Tuple #15, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #16, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #17, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #18, code = 0x1b (Configuration entry), length = 3
000: 30 08 23
Config index = 0x30
Card decodes 3 address lines, 8 Bit I/O only
Tuple #19, code = 0xff (Terminator), length = 0
2 slots found
------------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199601051521.PAA00294>