Date: Tue, 30 Mar 2004 09:25:45 -0800 From: Andrew Marks <spam@amrx.net> To: freebsd-mobile@freebsd.org Subject: Re: The Best Laptop Message-ID: <20040330172545.GA21606@mail.san.rr.com> In-Reply-To: <20040329211056.E68476@fez.hyperreal.org> References: <40686157.3020902@cs.uiowa.edu> <4068F730.3020400@pacific.net.sg> <20040329211056.E68476@fez.hyperreal.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 29, 2004 at 09:17:01PM -0800, Brian Behlendorf wrote: > > I've got this too, under 5-CURRENT, but I can't get atapicam to work; if I > compile it in the kernel then it won't boot if the CD-RW is attached. > Without it in the kernel, I can't burn CDs (unless there's some tool that > supports IDE CD burning?). Any idea? > > They've gotten suspend/resume working under Linux: check out > > http://mrohne.home.cern.ch/mrohne/P2120/P2120_Linux_S3.html > > but it sounds like a Mighty Hack. > > Brian > > On Tue, 30 Mar 2004, Erich Dollansky wrote: > > I have an Fujitsu P2120. FreeBSD 5.2 works but has problems with the > > power settings. With other words, NT has a longer operating time than > > FreeBSD on it. > > > > All other features of the machines did not make any problems. > > > > Erich > > I also have a P2120 running CURRENT. I noticed that atapicam developed some problems but have been doing alright without out it. I have also been getting along with out my USB 2.0 ports, or pretty much any USB ports, save the one for the floppy drive which seems to work. I was wondering if either of you have USB support on your P2120s, and what you may have done differently than me. Also, there is a power management device that also has no support. dmesg ------------------------------- ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0 ohci1: Could not map memory device_probe_and_attach: ohci1 attach returned 6 ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0 ohci1: Could not map memory device_probe_and_attach: ohci1 attach returned 6 pciconf -vl: ------------------------------------------------- none3@pci0:9:0: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210/72010xx USB Open Host Controller' class = serial bus subclass = USB none4@pci0:9:1: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210/72010xx USB Open Host Controller' class = serial bus subclass = USB none5@pci0:9:2: class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040330172545.GA21606>