Date: Mon, 31 Jul 2006 14:15:31 -0500 From: ejc <eric.j.christeson@gmail.com> To: freebsd-stable@freebsd.org Subject: ncplogin panic Message-ID: <7e3339060607311215s4951d903qcfbdd2dc5c9ed0ed@mail.gmail.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
I am having a problem getting ncplogin to work on my 6.1-stable
system. When I run ncplogin I get the following panic (hand
transcribed):
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x20:0xc052d0a7
stack pointer = 0x28:0xc6021a98
stack frame = 0x28:0xc6021ab4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 863 (ncplogin)
trap number = 12
panic: page fault
cpuid = 1
I tried to get a good core dump, but am failing at that also. Setting
hw.physmem="64M" (or 128M, 256M, 512M or 1024M) results in the machine
becoming unresponsive before it starts to dump anything. It prints
"Dumping XXMB (2 chunks) and then hangs until I hit the power switch.
I got one core dump with the full 2G of memory enabled, but kgdb
couldn't use it.
One other thing to note is that this is with an SMP kernel. A uni
kernel doesn't dump core, but is still unable to connect to our novell
server. I know this report is rather sparse, but I don't have much to
go on. I have attached a dmesg dump and will try to provide any other
information if someone is willing to help.
Thanks
Eric
[-- Attachment #2 --]
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #1: Thu Jul 27 11:47:30 CDT 2006
root@chicadee.cc.ndsu.nodak.edu:/usr/obj/usr/src/sys/CHICADEE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2793.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf47 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2145935360 (2046 MB)
avail memory = 2094874624 (1997 MB)
ACPI APIC Table: <DELL GX620 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <DELL GX620 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon RV370 X600 Pro> port 0xdc00-0xdcff mem 0xe0000000-0xefffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
info: [drm] Initialized radeon 1.24.0 20060225
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xfe8f0000-0xfe8fffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:13:72:80:27:4b
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
uhub6: vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 3
uhub6: multiple transaction translators
uhub6: 4 ports with 4 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcm0: <Intel ICH7 (82801GB)> port 0xec00-0xecff,0xe8c0-0xe8ff mem 0xfebffa00-0xfebffbff,0xfebff900-0xfebff9ff irq 23 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 20 at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xccfff,0xcd000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
ncp_load: loaded
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
ad0: 152587MB <WDC WD1600JS-75NCB2 10.02E03> at ata0-master SATA150
acd0: DVDR <PHILIPS DVD+/-RW DVD8801/2D06> at ata1-master UDMA33
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW DVD8801 2D06> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
bge0: link state changed to UP
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7e3339060607311215s4951d903qcfbdd2dc5c9ed0ed>