Date: Sun, 20 Apr 2008 07:03:37 GMT From: Stas Timokhin <stast@bsdportal.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/122926: Burning with k3b cause kernel panic if kscd runs simua Message-ID: <200804200703.m3K73b2Q085302@www.freebsd.org> Resent-Message-ID: <200804200710.m3K7A1Rh045730@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 122926
>Category: kern
>Synopsis: Burning with k3b cause kernel panic if kscd runs simua
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Apr 20 07:10:00 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: Stas Timokhin
>Release: 7.0-RELEASE
>Organization:
None
>Environment:
FreeBSD home.stasyan.com 7.0-RELEASE FreeBSD 7.0-RELEASE #2: Sat Mar 29 21:51:47 NOVT 2008 root@home.stasyan.com:/usr/src/sys/i386/compile/EASTERN70 i386
>Description:
Burning DVD with k3b cause kernel panic if kscd was running.
System enviroment:
kscd from kdemultimedia-3.5.8, k3b from k3b-1.0.4
Output of dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #2: Sat Mar 29 21:51:47 NOVT 2008
root@home.stasyan.com:/usr/src/sys/i386/compile/EASTERN70
module_register: module isa/uart already exists!
Module isa/uart failed to register: 17
module_register: module cardbus/uart already exists!
Module cardbus/uart failed to register: 17
module_register: module pci/uart already exists!
Module pci/uart failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (692.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 511381504 (487 MB)
kbd1 at kbdmux0
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40f7 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem 0xd4000000-0xd4ffffff,0xc0000000-0xc7ffffff,0xc8000000-0xc807ffff irq 10 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <Forte Media FM801 Audio Controller> port 0xc000-0xc07f irq 5 at device 2.0 on pci2
pcm0: <SigmaTel STAC9700/83/84 AC97 Codec>
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pci2: <input device> at device 2.1 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xc800-0xc81f mem 0xd8000000-0xd8000fff,0xd7000000-0xd70fffff irq 11 at device 4.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:08:c7:d9:c9:55
fxp0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 9 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 9 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 692950436 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
ad0: 19541MB <Maxtor 2B020H1 WAH21PB0> at ata0-master UDMA100
ad1: 114473MB <Seagate ST3120814A 2AAA> at ata0-slave UDMA100
acd0: DVDR <NEC DVD RW ND-4550A/1.07> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad1s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-4550A 1.07> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
link_elf: symbol msleep undefined
stray irq7
stray irq7
stray irq7
stray irq7
too many stray irq 7's: not logging anymore
>How-To-Repeat:
1) Run kscd
2) Run k3b and try to burn DVD
3) Wait for a panic until the burning ends.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200804200703.m3K73b2Q085302>