Date: Wed, 22 Nov 2000 23:01:39 +0800 (CST) From: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw> To: <freebsd-stable@FreeBSD.org> Subject: 4.2-RELEASE ata0-master probe failed Message-ID: <Pine.BSF.4.30.0011222251170.318-100000@brahms.mmlab.cse.yzu.edu.tw>
next in thread | raw e-mail | index | archive | help
Hi, I've tried to upgrade my laptop to 4.2-RELEASE from installation floppies this morning. It seemed that the kernel was failed to probe my hard disk on ata0-master. From my observation, the same error(ata0-master: ata_comand: timeout waiting for intr) occurred since ata-all.c, 1.50.2.7. Any solution? verbose booting message from 4.2-RELEASE: atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 3.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0 ata0: mask=03 status0=50 status1=50 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=14 b=eb ata0: mask=03 status0=50 status1=00 ata0-master: ATAPI probe a=01 b=a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ata0: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8 ata0: mask=00 status0=ff status1=ff ata1: probe allocation failed . . . ata0-master: ata_comand: timeout waiting for intr ata0-master: identify failed ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-slave: success setting WDMA2 on PIIX4 chip acd0: <UJDA150/1.50> CDROM drive at ata0 as slave acd0: read 4134KB/s (4134KB/s), 128KB buffer, WDMA2 acd0: Reads: CD-R, CD-RW, CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked no devsw (majdev=30 bootdev=0xa0300001e) Mount root from ufs:ad0s2a no such device 'ad' setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 . . . verbose booting message from 4.1.1-RELEASE(all disk probed successfully): Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-RELEASE #0 Calibrating clock(s) ... TSC clock: 265248333 Hz, i8254 clock: 1193116 Hz Timecounter "i8254" frequency 1193116 Hz CPU: Pentium II/Pentium II Xeon/Celeron (265.25-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002e3000 - 0x03ff5fff, 64040960 bytes (15635 pages) avail memory = 62603264 (61136K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6460 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x203 pnpbios: Found PnP BIOS data at 0xc00f6490 pnpbios: Entry = f0000:ac98 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6440 VESA: information block 56 45 53 41 00 02 6b 00 00 c0 00 00 00 00 42 87 00 c0 20 00 00 00 12 29 00 c0 13 29 00 c0 14 29 00 c0 15 29 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 15 mode(s) found VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc00c8742 (c0008742) VESA: Copyright 1994 TRIDENT MICROSYSTEMS INC. VESA: Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80001010 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard found-> vendor=0x8086, dev=0x7192, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00000000, size 26 found-> vendor=0x1023, dev=0x9388, revid=0xd3 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fe400000, size 22 map[14]: type 1, range 32, base fede0000, size 17 map[18]: type 1, range 32, base fe800000, size 22 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcd0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[20]: type 1, range 32, base 0000fce0, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000ff80, size 4 found-> vendor=0x104c, dev=0xac19, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x104c, dev=0xac19, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=255 pci0: <PCI bus> on pcib0 pci0: <Trident model 9388 VGA-compatible display device> (vendor=0x1023, dev=0x9388) at 2.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 3.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x9 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 3.2 irq 9 chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 3.3 on pci0 pcic-pci0: <TI PCI-1221 PCI-CardBus Bridge> at device 10.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac19104c 02100047 06070000 00820000 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c401ff 40: 77887878 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449020 00000000 00000000 010c1000 90: 616602c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f0009c9f: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <TI PCI-1221 PCI-CardBus Bridge> at device 10.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq] PCI Config space: 00: ac19104c 02100047 06070000 00820000 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c402ff 40: 77887878 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449020 00000000 00000000 010c1000 90: 616602c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f0009c9f: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00006000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 03 c0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0 sio1: type 16550A sbc0: <ESS 688> at port 0x220-0x22f irq 5 drq 3 flags 0x15 on isa0 pcm0: <ESS 18xx DSP> on sbc0 pcm0: ESS1869 detected, newspeed pcm: setmap 4000, 1000; 0xc5488000 -> 4000 pcm: setmap 5000, 1000; 0xc5489000 -> 5000 pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices BIOS Geometries: 0:03127f3f 0..786=787 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ata0-master: success setting UDMA2 on PIIX4 chip ad0: <HITACHI_DK237A-32/00U0A0D0> ATA-3 disk at ata0 as master ad0: 3102MB (6354432 sectors), 6304 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-slave: success setting WDMA2 on PIIX4 chip acd0: <UJDA150/1.50> CDROM drive at ata0 as slave acd0: read 4134KB/s (4134KB/s), 128KB buffer, WDMA2 acd0: Reads: CD-R, CD-RW, CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked Mounting root from ufs:ad0s2a ad0s1: type 0x83, start 63, end = 2096639, size 2096577 : OK ad0s2: type 0xa5, start 2096640, end = 4193279, size 2096640 : OK ad0s3: type 0x6, start 4193280, end = 6072191, size 1878912 : OK ad0s4: type 0xa0, start 6072192, end = 6346367, size 274176 : OK pccard: card inserted, slot 1 start_init: trying /sbin/init splash: image decoder found: blank_saver Linux-ELF exec handler installed pcic: I/O win 0 flags 15 240-25f pcic: I/O win 0 flags 5 240-25f ed0 at port 0x240-0x25f irq 11 slot 1 on pccard1 pcic: I/O win 0 flags 15 240-25f bpf: ed0 attached Kernel configuration: machine i386 ident brahms maxusers 10 makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. options BLKDEV_IOSIZE=8192 options PQ_CACHESIZE=512 # color for 512k/16k cache options ROOTDEVNAME=\"ufs:ad0s2a\" cpu I686_CPU # aka Pentium Pro(tm) options NO_F00F_HACK options COMPAT_43 options SYSVSHM # include support for shared memory options SYSVSEM # include support for semaphores options SYSVMSG # include support for message queues options KTRACE #kernel tracing options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options INET #Internet communications protocols pseudo-device ether #Generic Ethernet pseudo-device loop #Network loopback device pseudo-device bpf #Berkeley packet filter options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN options TCP_RESTRICT_RST #restrict emission of TCP RST options ICMP_BANDLIM options FFS #Fast filesystem options MFS #Memory File System options FFS_ROOT #FFS usable as root device options SOFTUPDATES options EXT2FS options VFS_AIO options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L pseudo-device pty #Pseudo ttys pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) options MSGBUF_SIZE=40960 device isa options AUTO_EOI_1 options MAXMEM="(64*1024)" device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 options PSM_HOOKRESUME options PSM_RESETAFTERSUSPEND device vga0 at isa? options VESA pseudo-device splash device sc0 at isa? options MAXCONS=16 # number of virtual consoles options SC_HISTORY_SIZE=2000 # number of history buffer lines device npx0 at nexus? port IO_NPX flags 0x0 irq 13 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_ENABLE_ATAPI_DMA options IDE_DELAY=8000 # Be optimistic about Joe IDE device device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 flags 0x10 irq 3 device pcm device sbc0 at isa? port 0x220 irq 5 drq 3 flags 0x15 device apm0 device pci device pcic0 at isa? irq 10 device card device ed options PCIC_RESUME_RESET # reset after resume options PPC_PROBE_CHIPSET device ppc0 at isa? irq 7 device ppbus device lpt device plip device ppi options NSFBUFS=1024 options INIT_PATH="/sbin/init:/stand/sysinstall" options CLK_USE_I8254_CALIBRATION options CLK_USE_TSC_CALIBRATION options SHOW_BUSYBUFS # List buffers that prevent root unmount To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.30.0011222251170.318-100000>