Date: Tue, 29 May 2012 03:23:18 +0000 (UTC) From: Warner Losh <imp@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r236215 - head/sys/arm/at91 Message-ID: <201205290323.q4T3NIo9049606@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: imp Date: Tue May 29 03:23:18 2012 New Revision: 236215 URL: http://svn.freebsd.org/changeset/base/236215 Log: Compute the master clock frequency, so we no longer need to have it compiled into the kernel. This allows us to boot the same kernel on machines with different master clock frequencies, so long as we can determine the main clock frequency accurately. Cleanup the pmc clock init function so it can be called in early boot so we can use the serial port just after we call cninit. # We have two calls to at91_pmc_clock_init for reasons unknown, that will # be fixed later -- it is harmless for now. Modified: head/sys/arm/at91/at91.c head/sys/arm/at91/at91_machdep.c head/sys/arm/at91/at91_pmc.c head/sys/arm/at91/at91rm92reg.h head/sys/arm/at91/at91sam9260reg.h head/sys/arm/at91/at91sam9g20reg.h head/sys/arm/at91/at91var.h head/sys/arm/at91/std.ethernut5 head/sys/arm/at91/std.hl200 head/sys/arm/at91/std.hl201 head/sys/arm/at91/std.kb920x head/sys/arm/at91/std.qila9g20 head/sys/arm/at91/std.sam9g20ek Modified: head/sys/arm/at91/at91.c ============================================================================== --- head/sys/arm/at91/at91.c Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91.c Tue May 29 03:23:18 2012 (r236215) @@ -56,11 +56,7 @@ extern const struct pmap_devmap at91_dev uint32_t at91_chip_id; -#ifdef AT91C_MASTER_CLOCK -uint32_t at91_master_clock = AT91C_MASTER_CLOCK; -#else uint32_t at91_master_clock; -#endif static int at91_bs_map(void *t, bus_addr_t bpa, bus_size_t size, int flags, Modified: head/sys/arm/at91/at91_machdep.c ============================================================================== --- head/sys/arm/at91/at91_machdep.c Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91_machdep.c Tue May 29 03:23:18 2012 (r236215) @@ -363,6 +363,7 @@ initarm(void *arg, void *arg2) cninit(); + at91_pmc_init_clock(); /* Get chip id so device drivers know about differences */ at91_chip_id = *(volatile uint32_t *) (AT91_BASE + AT91_DBGU_BASE + DBGU_C1R); Modified: head/sys/arm/at91/at91_pmc.c ============================================================================== --- head/sys/arm/at91/at91_pmc.c Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91_pmc.c Tue May 29 03:23:18 2012 (r236215) @@ -55,12 +55,15 @@ static struct at91_pmc_softc { bus_space_handle_t sc_sh; struct resource *mem_res; /* Memory resource */ device_t dev; - uint32_t pllb_init; } *pmc_softc; +static uint32_t pllb_init; + MALLOC_DECLARE(M_PMC); MALLOC_DEFINE(M_PMC, "at91_pmc_clocks", "AT91 PMC Clock descriptors"); +#define AT91_PMC_BASE 0xffffc00 + static void at91_pmc_set_pllb_mode(struct at91_pmc_clock *, int); static void at91_pmc_set_sys_mode(struct at91_pmc_clock *, int); static void at91_pmc_set_periph_mode(struct at91_pmc_clock *, int); @@ -150,6 +153,11 @@ static inline uint32_t RD4(struct at91_pmc_softc *sc, bus_size_t off) { + if (sc == NULL) { + uint32_t *p = (uint32_t *)(AT91_BASE + AT91_PMC_BASE + off); + + return *p; + } return (bus_read_4(sc->mem_res, off)); } @@ -157,7 +165,12 @@ static inline void WR4(struct at91_pmc_softc *sc, bus_size_t off, uint32_t val) { - bus_write_4(sc->mem_res, off, val); + if (sc == NULL) { + uint32_t *p = (uint32_t *)(AT91_BASE + AT91_PMC_BASE + off); + + *p = val; + } else + bus_write_4(sc->mem_res, off, val); } void @@ -168,7 +181,7 @@ at91_pmc_set_pllb_mode(struct at91_pmc_c if (on) { on = PMC_IER_LOCKB; - value = sc->pllb_init; + value = pllb_init; } else value = 0; @@ -398,15 +411,17 @@ static const unsigned int at91_main_cloc 16000000, 17344700, 18432000, 20000000 }; #define MAIN_CLOCK_TBL_LEN (sizeof(at91_main_clock_tbl) / sizeof(*at91_main_clock_tbl)) +#endif static unsigned int -at91_pmc_sense_main_clock(struct at91_pmc_softc *sc) +at91_pmc_sense_main_clock(void) { +#if !defined(AT91C_MAIN_CLOCK) unsigned int ckgr_val; unsigned int diff, matchdiff, freq; int i; - ckgr_val = (RD4(sc, CKGR_MCFR) & CKGR_MCFR_MAINF_MASK) << 11; + ckgr_val = (RD4(NULL, CKGR_MCFR) & CKGR_MCFR_MAINF_MASK) << 11; /* * Clocks up to 50MHz can be connected to some models. If @@ -432,21 +447,20 @@ at91_pmc_sense_main_clock(struct at91_pm } } return (freq); -} +#else + return (AT91C_MAIN_CLOCK); #endif +} -static void -at91_pmc_init_clock(struct at91_pmc_softc *sc) +void +at91_pmc_init_clock(void) { + struct at91_pmc_softc *sc = NULL; unsigned int main_clock; uint32_t mckr; uint32_t mdiv; -#if !defined(AT91C_MAIN_CLOCK) - main_clock = at91_pmc_sense_main_clock(pmc_softc); -#else - main_clock = AT91C_MAIN_CLOCK; -#endif + main_clock = at91_pmc_sense_main_clock(); if (at91_is_sam9() || at91_is_sam9xe()) { uhpck.pmc_mask = PMC_SCER_UHP_SAM9; @@ -464,8 +478,8 @@ at91_pmc_init_clock(struct at91_pmc_soft * Initialize the usb clock. This sets up pllb, but disables the * actual clock. */ - sc->pllb_init = at91_pmc_pll_calc(&pllb, 48000000 * 2) | 0x10000000; - at91_pmc_pll_rate(&pllb, sc->pllb_init); + pllb_init = at91_pmc_pll_calc(&pllb, 48000000 * 2) | 0x10000000; + at91_pmc_pll_rate(&pllb, pllb_init); #if 0 /* Turn off USB clocks */ @@ -570,8 +584,11 @@ at91_pmc_attach(device_t dev) /* * Configure main clock frequency. */ - at91_pmc_init_clock(pmc_softc); + at91_pmc_init_clock(); + /* + * Display info about clocks previously computed + */ device_printf(dev, "Primary: %d Hz PLLA: %d MHz CPU: %d MHz MCK: %d MHz\n", main_ck.hz, Modified: head/sys/arm/at91/at91rm92reg.h ============================================================================== --- head/sys/arm/at91/at91rm92reg.h Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91rm92reg.h Tue May 29 03:23:18 2012 (r236215) @@ -403,10 +403,6 @@ #define AT91RM92_CF_PA_BASE 0x51400000 #define AT91RM92_CF_SIZE 0x00100000 -#ifndef AT91C_MASTER_CLOCK -#define AT91C_MASTER_CLOCK 60000000 -#endif - /* SDRAMC */ #define AT91RM92_SDRAMC_BASE 0xfffff90 Modified: head/sys/arm/at91/at91sam9260reg.h ============================================================================== --- head/sys/arm/at91/at91sam9260reg.h Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91sam9260reg.h Tue May 29 03:23:18 2012 (r236215) @@ -28,10 +28,6 @@ #ifndef AT91SAM9260REG_H_ #define AT91SAM9260REG_H_ -#ifndef AT91SAM9260_MASTER_CLOCK -#define AT91SAM9260_MASTER_CLOCK ((18432000 * 43)/6) -#endif - /* Chip Specific limits */ #define SAM9260_PLL_A_MIN_IN_FREQ 1000000 /* 1 Mhz */ #define SAM9260_PLL_A_MAX_IN_FREQ 32000000 /* 32 Mhz */ Modified: head/sys/arm/at91/at91sam9g20reg.h ============================================================================== --- head/sys/arm/at91/at91sam9g20reg.h Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91sam9g20reg.h Tue May 29 03:23:18 2012 (r236215) @@ -29,10 +29,6 @@ #ifndef AT91SAM9G20REG_H_ #define AT91SAM9G20REG_H_ -#ifndef AT91SAM9G20_MASTER_CLOCK -#define AT91SAM9G20_MASTER_CLOCK ((18432000 * 43)/6) -#endif - /* Chip Specific limits */ #define SAM9G20_PLL_A_MIN_IN_FREQ 2000000 /* 2 Mhz */ #define SAM9G20_PLL_A_MAX_IN_FREQ 32000000 /* 32 Mhz */ Modified: head/sys/arm/at91/at91var.h ============================================================================== --- head/sys/arm/at91/at91var.h Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/at91var.h Tue May 29 03:23:18 2012 (r236215) @@ -97,4 +97,6 @@ at91_cpu_is(u_int cpu) extern uint32_t at91_irq_system; extern uint32_t at91_master_clock; +void at91_pmc_init_clock(void); + #endif /* _AT91VAR_H_ */ Modified: head/sys/arm/at91/std.ethernut5 ============================================================================== --- head/sys/arm/at91/std.ethernut5 Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.ethernut5 Tue May 29 03:23:18 2012 (r236215) @@ -7,8 +7,5 @@ makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 -# SAM9XE512 w/ 90.3168 MHz master clock -options AT91C_MASTER_CLOCK=90316800 - device at91_board_ethernut5 nodevice at91sam9g20 Modified: head/sys/arm/at91/std.hl200 ============================================================================== --- head/sys/arm/at91/std.hl200 Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.hl200 Tue May 29 03:23:18 2012 (r236215) @@ -6,6 +6,5 @@ makeoptions KERNPHYSADDR=0x20100000 options KERNPHYSADDR=0x20100000 makeoptions KERNVIRTADDR=0xc0100000 options KERNVIRTADDR=0xc0100000 -options AT91C_MASTER_CLOCK=45000000 device at91_board_hl200 Modified: head/sys/arm/at91/std.hl201 ============================================================================== --- head/sys/arm/at91/std.hl201 Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.hl201 Tue May 29 03:23:18 2012 (r236215) @@ -6,6 +6,5 @@ makeoptions KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 -options AT91C_MASTER_CLOCK=132000000 device at91_board_hl201 Modified: head/sys/arm/at91/std.kb920x ============================================================================== --- head/sys/arm/at91/std.kb920x Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.kb920x Tue May 29 03:23:18 2012 (r236215) @@ -6,6 +6,5 @@ makeoptions KERNPHYSADDR=0x20000000 options KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNVIRTADDR=0xc0000000 -options AT91C_MASTER_CLOCK=60000000 device at91_board_kb920x Modified: head/sys/arm/at91/std.qila9g20 ============================================================================== --- head/sys/arm/at91/std.qila9g20 Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.qila9g20 Tue May 29 03:23:18 2012 (r236215) @@ -6,6 +6,5 @@ makeoptions KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 -options AT91C_MASTER_CLOCK=((12000000*133)/12) device at91_board_qila9g20 Modified: head/sys/arm/at91/std.sam9g20ek ============================================================================== --- head/sys/arm/at91/std.sam9g20ek Tue May 29 01:52:38 2012 (r236214) +++ head/sys/arm/at91/std.sam9g20ek Tue May 29 03:23:18 2012 (r236215) @@ -7,9 +7,4 @@ makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 -#SAM9G20 w/ 18.432 Mhz Clock -#options AT91C_MASTER_CLOCK=((18432000*43)/6) -#SAM9260 w/ 18.432 Mhz Clock -#options AT91C_MASTER_CLOCK=((18432000*97)/18) - device at91_board_sam9g20ek
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201205290323.q4T3NIo9049606>