Date: Sat, 13 Aug 2011 00:39:25 +0300 From: Alexander Motin <mav@FreeBSD.org> To: Alexander Burchell <alexander.burchell@gmail.com> Cc: current@FreeBSD.org Subject: Re: Optiarc DVD-ROM not recognized with ATA_CAM Message-ID: <4E459D8D.8040702@FreeBSD.org> In-Reply-To: <mailpost.1313179342.1632840.84225.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw> References: <mailpost.1313179342.1632840.84225.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12.08.2011 22:33, Alexander Burchell wrote: > I'm not being able to get my DVD-ROM recognized under 9-current, > although I used the 8.2-release DVD to install FreeBSD (and then > subsequently upgraded the system to the "head" version via svn-freebsd). > > 1) There is no /dev/*cd* ANYTHING at any time. > > NOTE: I'm using a kernel (built with clang) using the ATA_CAM option so > I presume my DVD would be "/dev/acd0". > > 2) There is no indication in the boot log that the drive is probed. The > drive light does not flash (not sure if they even do that anymore), > however, after having moved it to another controller (AHCI SATA-3) I > sometimes get a log such as this: > > ahcich1: Timeout on slot 0 port 0 > ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr > 00000000 > run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config > ahcich1: Timeout on slot 0 port 0 > ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr > 00000000 > > It is an "Optiarc DVD RW AD-7190S". I believe it's at microcode 1.01 and > there is 1.03 available at manufacturer site however that leads me to: Could you send me full verbose (boot -v) dmesgs with drive connected to both chipset and Marvell controllers? -- Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E459D8D.8040702>