Date: Tue, 9 Feb 2010 09:17:47 -0800 From: Bill Campbell <freebsd@celestial.com> To: "freebsd@celestial.com" <freebsd@celestial.com>, "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: for vpn connection Message-ID: <20100209171747.GA12162@ayn.mi.celestial.com> In-Reply-To: <20100209171526.GA5812@ayn.mi.celestial.com> References: <133967.39832.qm@web30808.mail.mud.yahoo.com> <20100209171526.GA5812@ayn.mi.celestial.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--gKMricLos+KVdGMg Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Feb 09, 2010, Bill Campbell wrote: >On Mon, Feb 08, 2010, D?nielisz L?szl? wrote: >>hi, > >>i also choose poptop and pptp but i'm still getting errors while >>connecting, would you be so kind to send me some configuration files? > >The attached configuration files, options.pptpd and pptpd.conf >are the ones I'm using. Whoops, early morning brain fart. The files are attached. Bill -- INTERNET: bill@celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way Voice: (206) 236-1676 Mercer Island, WA 98040-0820 Fax: (206) 232-9186 Skype: jwccsllc (206) 855-5792 A tax-supported, compulsory educational system is the complete model of the totalitarian state. -- Isabel Paterson, God of the Machine --gKMricLos+KVdGMg Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="options.pptpd" ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /csrel26/etc/pptpd/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /csrel26/etc/pptpd/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) #debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) --gKMricLos+KVdGMg Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pptpd.conf" ############################################################################### # $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $ # # Sample Poptop configuration file /etc/pptpd.conf # # Changes are effective when pptpd is restarted. ############################################################################### # TAG: ppp # Path to the pppd program, default '/csrel26/sbin/pppd' on Linux # #ppp /csrel26/sbin/pppd # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/csrel26/etc/pptpd/options' # option /csrel26/etc/pptpd/options.pptpd # TAG: debug # Turns on (more) debugging to syslog # #debug # TAG: stimeout # Specifies timeout (in seconds) on starting ctrl connection # # stimeout 10 # TAG: noipparam # Suppress the passing of the client's IP address to PPP, which is # done by default otherwise. # #noipparam # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # # logwtmp # TAG: bcrelay <if> # Turns on broadcast relay to clients from interface <if> # #bcrelay eth1 # TAG: delegate # Delegates the allocation of client IP addresses to pppd. # # Without this option, which is the default, pptpd manages the list of # IP addresses for clients and passes the next free address to pppd. # With this option, pptpd does not pass an address, and so pppd may use # radius or chap-secrets to allocate an address. # #delegate # TAG: connections # Limits the number of client connections that may be accepted. # # If pptpd is allocating IP addresses (e.g. delegate is not # used) then the number of connections is also limited by the # remoteip option. The default is 100. connections 10 # TAG: localip # TAG: remoteip # Specifies the local and remote IP address ranges. # # These options are ignored if delegate option is set. # # Any addresses work as long as the local machine takes care of the # routing. But if you want to use MS-Windows networking, you should # use IP addresses out of the LAN address space and use the proxyarp # option in the pppd options file, or run bcrelay. # # You can specify single IP addresses seperated by commas or you can # specify ranges, or both. For example: # # 192.168.0.234,192.168.0.245-249,192.168.0.254 # # IMPORTANT RESTRICTIONS: # # 1. No spaces are permitted between commas or within addresses. # # 2. If you give more IP addresses than the value of connections, # it will start at the beginning of the list and go until it # gets connections IPs. Others will be ignored. # # 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, # you must type 234-238 if you mean this. # # 4. If you give a single localIP, that's ok - all local IPs will # be set to the given one. You MUST still give at least one remote # IP for each simultaneous client. # # (Recommended) localip 192.168.253.100 remoteip 192.168.253.101-110 # or #localip 192.168.0.234-238,192.168.0.245 #remoteip 192.168.1.234-238,192.168.1.245 --gKMricLos+KVdGMg Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses billipod pptpd mysecret * ####### redhat-config-network will overwrite this part!!! (begin) ########## ####### redhat-config-network will overwrite this part!!! (end) ############ --gKMricLos+KVdGMg--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100209171747.GA12162>